Filtering Events By Message Id; Filtering Events By Service Component; Displaying The Name Server Entries - Brocade Communications Systems SN3000B Administrator's Manual

Filtering events by message ID

To filter events by message ID, perform the following steps.
1. Open the Switch Events tab as described in
2. Click Filter.
3. Select Message ID.
4. Enter the message IDs in the associated field.
5. Click OK.

Filtering events by service component

To filter events by service component, perform the following steps.
1. Open the Switch Events tab as described in
2. Click Filter.
3. Select Service. The event service menu is enabled.
4. Select either Switch or Chassis from the menu to show only those messages from the logical
5. Click OK.

Displaying the Name Server entries

Web Tools displays Name Server entries listed in the Simple Name Server database. This includes
all Name Server entries for the fabric, not only those related to the local domain. Each row in the
table represents a different device. You can click the column head to sort the events by a particular
column, and drag the column divider to resize a column. You can also right-click a column heading
to resize one or all columns, sort the information in ascending or descending order, or select which
columns are displayed.
Admin Domain considerations: The Name Server table is filtered based on Admin Domain
membership of the fabric devices. The Name Server table lists only devices that are part of your
current Admin Domain. This includes devices that are direct members of the Admin Domain and
devices that are attached to ports that are direct members of the Admin Domain. All other fabric
devices are filtered out of the Name Server view for the current Admin Domain. Refer to
Domain membership"
Web Tools Adminstrator's Guide
53-1002152-01
The Event Filter dialog box displays.
NOTE
You can enter multiple message IDs as long as you separate them by commas. You can enter
either the full message ID (moduleID-messageType) or a partial ID (moduleID only). The
message ID filtering is case-sensitive.
The filter is enabled and the window is refreshed to show the filtered information.
The Event Filter dialog box displays.
switch or from the chassis.
The filter is enabled and the window is refreshed to show the filtered information.
on page 65 for information about direct and indirect members.

Displaying the Name Server entries

"Displaying Switch Events"
"Displaying Switch Events"
3
on page 49.
on page 49.
"Admin
51