Ethernet History Group - Brocade Communications Systems Brocade 8/12c Reference

Brocade fabric os mib reference supporting fabric os v7.0.0 (53-1002151-01, april 2011)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

Object and OID
historyControlOwner
1.3.6.1.2.1.16.2.1.1.6
historyControlStatus
1.3.6.1.2.1.16.2.1.1.7

Ethernet history group

Object and OID
etherHistoryTable
1.3.6.1.2.1.16.2.2
etherHistoryEntry
1.3.6.1.2.1.16.2.2.1
etherHistoryIndex
1.3.6.1.2.1.16.2.2.1.1
etherHistorySampleIndex
1.3.6.1.2.1.16.2.2.1.2
etherHistoryIntervalStart
1.3.6.1.2.1.16.2.2.1.3
etherHistoryDropEvents
1.3.6.1.2.1.16.2.2.1.4
etherHistoryOctets
1.3.6.1.2.1.16.2.2.1.5
etherHistoryPkts
1.3.6.1.2.1.16.2.2.1.6
etherHistoryBroadcastPk
ts
1.3.6.1.2.1.16.2.2.1.7
etherHistoryMulticastPkt
s
1.3.6.1.2.1.16.2.2.1.8
etherHistoryCRCAlignErro
rs
1.3.6.1.2.1.16.2.2.1.9
etherHistoryUndersizePkt
s
1.3.6.1.2.1.16.2.2.1.10
Fabric OS MIB Reference
53-1002151-01
Access
Description
Read-write
The entity that configured this entry and is therefore using the
resources assigned to it.
Read-write
The status of this historyControl entry.
Access
Description
Not
A list of Ethernet history entries.
accessible
Not
An historical sample of Ethernet statistics on a particular Ethernet
accessible
interface.
Read only
The history of which this entry is a part. The history identified by a
particular value of this index is the same history as identified by the
same value of historyControlIndex.
Read only
An index that uniquely identifies a particular sample this entry
represents among all the samples associated with the same
historyControlEntry. This index starts at 1 and increases by one as each
new sample is taken.
Read only
The value of sysUpTime at the start of the interval over which this
sample was measured.
Read only
The total number of events in which packets were dropped by the probe
due to lack of resources during this sampling interval.
NOTE: This number is not necessarily the number of packets dropped,
it is just the number of times this condition has been detected.
Read only
The total number of octets of data (including those in bad packets)
received on the network (excluding framing bits but including FCS
octets).
Read only
The number of packets (including bad packets) received during this
sampling interval.
Read only
The number of good packets received during this sampling interval that
were directed to the broadcast address.
Read only
The number of good packets received during this sampling interval that
were directed to a multicast address.
NOTE: This number does not include packets addressed to the
broadcast address.
Read only
The number of packets received during this sampling interval that had a
length (excluding framing bits but including FCS octets) between 64 and
1518 octets, inclusive, but either had a bad Frame Check Sequence
(FCS) with an integral number of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error).
Read only
The number of packets received during this sampling interval that were
less than 64 octets (excluding framing bits but including FCS octets) but
were otherwise well formed.
3
History group
63

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.0.0

Table of Contents