Modifying Active Directory Service; Removing Active Directory Service; Ipsec Concepts - Brocade Communications Systems 8 Administrator's Manual

17

IPsec concepts

5. Click Apply.

Modifying Active Directory service

Use the following procedure to change the parameters of a Active Directory service that is already
configured.
1. Open the Switch Administration window as described in
2. Select the AAA Service tab.
3. Select a server from the ADLDAP Configuration list.
4. Click Modify.
5. Enter new values for the port, timeout, and domain.
6. Click OK to return to the AAA Service tab.
7.

Removing Active Directory service

Use the following procedure to remove a RADIUS server.
1. Open the Switch Administration window as described in
2. Select the AAA Service tab.
3. Select a server from the ADLDAP Configuration list.
4. Click Remove.
5. Click Apply in the AAA Services tab.
6. Click Yes in the confirmation dialog box.

IPsec concepts

Internet Security Protocol (IPsec) is a set of open standards that provide cryptographic security
services for IP networks. Several protocols are available for providing authentication and secure
transmission of data.
228
DRAFT: BROCADE CONFIDENTIAL
NOTE
To disable Active Directory service, select Switch Database from the Primary AAA Service
drop-down menu and select None from the Secondary AAA Service drop-down menu.
window" on page 35.
The RADIUS/ADLDAP Configuration dialog box displays.
Click Apply.
window" on page 35.
NOTE
The server is not deleted until you apply the changes from the AAA Services tab.
A confirmation dialog box displays, warning you that you are about to remove the selected
server.
"Opening the Switch Administration
"Opening the Switch Administration
Web Tools Administrator's Guide
53-1001772-01