Conf-1020; Conf-1000; Conf-1022; Audit Conf System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

AUDIT CONF System Messages

CONF-1000

Message
AUDIT, <timestamp>, [CONF-1000], INFO, CFG, <event-initiator-details>,
<event-location>, , configDownload completed successfully.
parameters and AD>
Probable Cause The configDownload process was initiated and completed successfully. The message string
describes the class of configuration parameters that were downloaded. If admin domain (AD) is
enabled, the AD number is specified in the description.
Recommended No action is required.
Action
Severity INFO

CONF-1020

Message
AUDIT, <timestamp>, [CONF-1020], INFO, CFG, <event-initiator-details>,
<event-location>, , configDownload not permitted
configured on the system>
Probable Cause There are several possible causes.
Recommended Check the error log to determine the cause. Correct the error and retry the configDownload
Action operation.
Severity INFO

CONF-1022

Message
AUDIT, <timestamp>, [CONF-1022], WARNING, CFG, <event-initiator-details>,
<event-location>, , Downloading configuration without disabling the switch was
unsuccessful.
Probable Cause The system attempted to download a configuration without disabling the switch was unsuccessful
because there are one or more parameters that require the switch to be disabled.
Recommended Disable the switch using the switchDisable command and download the configuration.
Action
Severity WARNING
Fabric OS Message Reference
53-1000437-01
.
.
<Info about the
<AD Number if AD is
Chapter
79
461