Swch-1007; Swch-1008 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

SWCH-1007

Message
<timestamp>, [SWCH-1007], <sequence-number>,, WARNING, <system-name>, Switch port
<port number> disabled due to \"<disable reason>\".
Probable Cause Indicates that the switch port is disabled due to the reason displayed in the message.
Recommended Based on the disable reason displayed, proper corrective action may to be required to restore the
Action port.
If insufficient frame buffers is the disable reason, reduce the distance or speed settings for the
port to reduce the buffer requirement of the link. Alternatively, one or more ports in the port group
must be disabled to make more buffers available for the link.
Please refer to the Fabric OS Administrator's Guide for more information about buffers.
Severity WARNING

SWCH-1008

Message
<timestamp>, [SWCH-1008], <sequence-number>,, WARNING, <system-name>, <area
string> are port swapped on ports that do not support port swap. Slot <slot
number> will be faulted.
Probable Cause Indicates that the blade is enabled with the port configuration that already has area swapped.
Recommended Replace the blade with ports that support port swap. Then port swap the ports back to ports default
Action area.
Refer to the Fabric OS Administrator's Guide for more information on port swapping.
Severity WARNING
Fabric OS Message Reference
53-1000437-01
67
SWCH-1007
415