64
SNMP-1004
SNMP-1004
Message
<timestamp>, [SNMP-1004], <sequence-number>, FFDC, ERROR, <system-name>,
Incorrect SNMP configuration.
Probable Cause
Indicates that the simple network management protocol (SNMP) configuration is incorrect and the
SNMP service will not work correctly.
Recommended
Change the SNMP configuration back to the default.
Action
Severity
ERROR
SNMP-1005
Message
<timestamp>, [SNMP-1005], <sequence-number>, AUDIT, INFO, <system-name>, SNMP
configuration attribute, <Changed attribute>, has changed from <Old Value> to <New
Value>
Probable Cause
Indicates that the simple network management protocol (SNMP) configuration has changed. The
parameter that was modified is displayed as well as the old and new values for that parameter.
Recommended
Execute the snmpConfig --show command to see the new configuration.
Action
Severity
INFO
SNMP-1006
Message
<timestamp>, [SNMP-1006], <sequence-number>, AUDIT, INFO, <system-name>,
Configuration group>
Probable Cause
Indicates that the simple network management protocol (SNMP) configuration group was reset to
the factory default.
Recommended
Execute the snmpConfig --show for the group to see the new configuration.
Action
Severity
INFO
396
configuration was reset to default
<SNMP
Fabric OS Message Reference
53-1000437-01