Fw-1118; Fw-1119 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

27

FW-1118

FW-1118
Message
<timestamp>, [FW-1118], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of fabric reconfigurations has fallen below the low boundary. The
following occurrences can cause a fabric reconfiguration:
•
•
•
•
A low number of fabric reconfigurations means that the fabric is functioning normally.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation.
Severity INFO

FW-1119

Message
<timestamp>, [FW-1119], <sequence-number>,, INFO, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of fabric reconfigurations has risen above the high boundary. The
following occurrences can cause a fabric reconfiguration:
•
•
•
•
Recommended Verify that all interswitch link (ISL) cables are properly connected at both ends. Verify that the small
Action form-factor pluggable (SFP) has not become faulty. An inexplicable fabric reconfiguration might be
a transient error and might not require troubleshooting.
Severity INFO
168
Two switches with the same domain ID have connected to one another.
Two fabrics have joined.
An E_Port has gone offline.
A principal link has segmented from the fabric.
Two switches with the same domain ID have connected to one another.
Two fabrics have joined.
An E_Port has gone offline.
A principal link has segmented from the fabric.
Fabric OS Message Reference
53-1000437-01