Kswd-1003; Kswd System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

KSWD System Messages

KSWD-1003

Message
<timestamp>, [KSWD-1003], <sequence-number>, FFDC, WARNING, <system-name>, kSWD:
<Warning message>.
Probable Cause Indicates a warning state within the system.
A critical application error was reported in the watchdog subsystem. Refer to the string at the end
of the error message for specific information. The switch will reboot (on single-CP switches) or
failover (on dual-CP switches).
The warning message will be any one of the following:
•
•
Recommended SIGABRT is the signal thrown by the programs to abort the process. Run the supportSave command
Action to determine, if any core files were created. If a core file is found, run supportFtp to send all core
files to a secure server location.
Copy the warning message along with any core file information, and contact your switch service
provider.
Severity WARNING
Fabric OS Message Reference
53-1000437-01
<Detected unexpected termination of: <daemon name>>
Probable Cause: One of the critical daemons ended unexpectedly.
<<daemon name> failed to refresh SWD*** Sending SIGABRT to pid <process id number>>
Probable Cause: One of the critical daemons is found to be nonresponsive; sending signal
abort.
Chapter
41
279