Sec-1163; Sec-1164; Sec-1165 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

63

SEC-1163

SEC-1163
Message
<timestamp>, [SEC-1163], <sequence-number>,, ERROR, <system-name>, System is
already in secure mode. Lockdown option cannot be applied.
Probable Cause Indicates that the lockdown option was attempted while the fabric is already in secure mode.
Recommended Do not use the lockdown option with the secModeEnable command when switch is already in
Action secure mode.
Severity ERROR

SEC-1164

Message
<timestamp>, [SEC-1164], <sequence-number>,, ERROR, <system-name>, Lockdown
option cannot be applied on a non-FCS switch.
Probable Cause Indicates that the attempt to enable security is made on a switch that is not present in the fabric
configurations server (FCS) list.
Recommended Add the switch into the FCS policy list when using the lockdown option to enable security.
Action
Severity ERROR

SEC-1165

Message
<timestamp>, [SEC-1165], <sequence-number>,, ERROR, <system-name>, Low memory,
failed to enable security on all switches.
Probable Cause Indicates that the system is low on memory.
Recommended Wait a few minutes and try the command again.
Action
Severity ERROR
372 Fabric OS Message Reference
53-1000437-01