27
FW-1183
FW-1183
Message
<timestamp>, [FW-1183], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Cause
Indicates that the number of invalid cyclic redundancy checks (CRCs) that the port experiences has
changed from a value outside of the acceptable range to a value within the acceptable range.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation. Frequent fluctuations in CRC errors generally indicate an aging fabric. Check
your small form-factor pluggables (SFPs), cables, and connections for faulty hardware. Verify that
all optical hardware is clean.
Severity
INFO
FW-1184
Message
<timestamp>, [FW-1184], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Probable Cause
Indicates that the percentage of incoming traffic that the port experiences has changed.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
FW-1185
Message
<timestamp>, [FW-1185], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the percentage of incoming traffic that the port experiences has fallen below the low
boundary.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
184
Fabric OS Message Reference
53-1000437-01