Fcr-1042; Fcr-1043; Fcr-1048 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

20

FCR-1042

Probable Cause Indicates that a logical storage area network (LSAN) zone device within the backbone fabric was
removed.
Recommended No action is required.
Action
Severity INFO
FCR-1042
Message
<timestamp>, [FCR-1042], <sequence-number>,, INFO, <system-name>, LSAN zone
removed in the backbone fabric.
Probable Cause Indicates that a logical storage area network (LSAN) zone within the backbone fabric was removed.
Recommended No action is required.
Action
Severity INFO

FCR-1043

Message
<timestamp>, [FCR-1043], <sequence-number>,, INFO, <system-name>, Proxy device
created in the backbone fabric.
Probable Cause Indicates that a proxy device was created in the backbone fabric.
Recommended No action is required.
Action
Severity INFO

FCR-1048

Message
<timestamp>, [FCR-1048], <sequence-number>,, ERROR, <system-name>, On EX port
(<port number>) setting port <credit type> credits failed.
Probable Cause Indicates that the specified credit type was not set.
Recommended Setting port credits failed. Execute the portEnable command.
Action
If the problem persists try rebooting the switch.
If the message persists, collect switch information using the supportShow command, and contact
your switch service provider.
Severity ERROR
128 Fabric OS Message Reference
53-1000437-01