Sec-1327; Sec-1328; Sec-1329; Sec-1330 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

SEC-1327

Message
<timestamp>, [SEC-1327], <sequence-number>,, WARNING, <system-name>, Strict
<Policy Name> policy is conflicting with domain <Domain Number>
Probable Cause Strict policy is conflicting.
Recommended None, the domain is denied by disallowing all its E-ports connected to the fabric. If the domain
Action should be allowed to merge with the fabric, then resolve the issue by making the conflicting
policies same.
Severity WARNING

SEC-1328

Message
<timestamp>, [SEC-1328], <sequence-number>,, ERROR, <system-name>, Attempt to
enable secure mode failed. Reason: <Reason>.
Probable Cause Indicates that the secModeEnable command failed on the fabric, because Authentication Policy is
enabled on the switch.
Recommended Verify that the security event was planned. If the security event was planned, run the authUtil
Action --policy passive command to disable the Authentication Policy and retry the secModeEnable
command.
Severity ERROR

SEC-1329

Message
<timestamp>, [SEC-1329], <sequence-number>,, ERROR, <system-name>, IPFilter
enforcement: Failed to enforce ipfilter policy of <policy Type> type because of
<Error code>.
Probable Cause Indicates that the IP filter policy enforcement failed due to internal system failure.
Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave
Action command and contact your switch service provider.
Severity ERROR

SEC-1330

Message
<timestamp>, [SEC-1330], <sequence-number>,, ERROR, <system-nam>, <Name of
command> command failed - <List of databases rejecting distribution> db(s) are
coming from a non-Primary switch.
Probable Cause Indicates that an attempt was made to distribute database(s) either from a backup fabric
configuration server (FCS) switch or from a non-FCS switch.
Fabric OS Message Reference
53-1000437-01
63
SEC-1327
393