Hlo-1001; Hlo-1002; Hlo-1003; Hlo System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference
Brocade fabric os message reference - supporting fabric os v5.3.0 (53-1000437-01, june 2007)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Administrator's manual (452 pages)
Table of Contents
Advertisement
HLO System Messages
HLO-1001
Message
<timestamp>, [HLO-1001], <sequence-number>, FFDC, ERROR, <system-name>,
Incompatible Inactivity timeout <dead timeout> from port <port number>, correct
value <value>.
Probable Cause
Indicates that the HLO message was incompatible with the value specified in the FSPF protocol.
The Brocade switch will not accept FSPF frames from the remote switch.
In the Fabric OS, the HLO dead timeout value is not configurable, so this error can only occur when
the Brocade switch is connected to a switch from another manufacturer.
Recommended
The dead timeout value of the remote switch must be compatible with the value specified in the
Action
FSPF protocol. Refer to documentation of the other manufacturer's switch to change this value.
Severity
ERROR
HLO-1002
Message
<timestamp>, [HLO-1002], <sequence-number>, FFDC, ERROR, <system-name>,
Incompatible Hello timeout <HLO timeout> from port <port number>, correct value
<correct value>.
Probable Cause
Indicates that the HLO message was incompatible with the value specified in the FSPF protocol.
The Brocade switch will not accept FSPF frames from the remote switch.
In the Fabric OS, the HLO timeout value is not configurable, so this error can only occur when the
Brocade switch is connected to a switch from another manufacturer.
Recommended
The HLO timeout value of the remote switch must be compatible with the value specified in the
Action
FSPF protocol. Refer to documentation of the other manufacturer's switch to change this value.
Severity
ERROR
HLO-1003
Message
<timestamp>, [HLO-1003], <sequence-number>, FFDC, ERROR, <system-name>, Invalid
Hello received from port <port number>, Domain = <domain ID>, Remote Port =<remote
port ID>.
Probable Cause
Indicates that the HLO message received was invalid and the frame was dropped. The Brocade
switch will not accept FSPF frames from the remote switch.
Fabric OS Message Reference
53-1000437-01
Chapter
31
255
Advertisement
Table of Contents
