Hmon-1001; Hmon System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

HMON System Messages

HMON-1001

Message
<timestamp>, [HMON-1001], <sequence-number>, FFDC, CRITICAL, <system-name>,
<Failure description>
Probable Cause Indicates that there was a problem reading an essential file containing configuration information
from the nonvolatile storage device. This could be the result of a missing file or a corrupt file
system.
Recommended Run the firmwareDownload command to reinstall the firmware to your switch.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity CRITICAL
Fabric OS Message Reference
53-1000437-01
Chapter
32
257