Sec-1199; Sec-1200; Sec-1201 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

63

SEC-1199

SEC-1199
Message
<timestamp>, [SEC-1199], <sequence-number>,, INFO, <system-name>, Security
violation: Unauthorized access to serial port of switch
Probable Cause Indicates that a serial connection policy security violation was reported. An attempt was made to
access the serial console on the specified switch instance when it is disabled.
Recommended Check to see if an authorized access attempt is being made on the console. If so, add the switch
Action world-wide name (WWN) to the serial policy. If the host is not allowed access to the fabric, this is a
valid violation message and an unauthorized entity is trying to access your fabric. Take appropriate
action, as defined by your enterprise security policy.
Severity INFO

SEC-1200

Message
<timestamp>, [SEC-1200], <sequence-number>,, INFO, <system-name>, Security
violation: MS command is forwarded from non-primary FCS switch.
Probable Cause Indicates that a management server (MS) forward security violation was reported. A management
server command was forwarded from a non-primary fabric configurations server (FCS) switch.
Recommended Check the MS policy and verify that the connection is allowed. If the connection is allowed but not
Action specified, enable the connection in the MS policy. If the MS policy does not allow the connection,
this is a valid violation message and an unauthorized entity is trying to access your fabric. Take
appropriate action, as defined by your enterprise security policy.
Severity INFO

SEC-1201

Message
<timestamp>, [SEC-1201], <sequence-number>,, INFO, <system-name>, Security
violation: MS device
Probable Cause Indicates that a management server (MS) operation security violation was reported. An MS device
operation occurred on a non-primary fabric configurations server (FCS) switch.
Recommended Check the management server policy and verify that the connection is allowed. If the connection is
Action allowed but not specified, enable the connection is MS policy. If the MS policy does not allow the
connection, this is a valid violation message and an unauthorized entity is trying to access your
fabric. Take appropriate action, as defined by your enterprise security policy.
Severity INFO
382
<device WWN>
operates on non-primary FCS switch.
<switch instance>
.
Fabric OS Message Reference
53-1000437-01