Sec-1139; Sec-1142; Sec-1145 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

Brocade fabric os message reference - supporting fabric os v5.3.0 (53-1000437-01, june 2007)
Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:
Table of Contents

Advertisement

63

SEC-1139

SEC-1139
Message
<timestamp>, [SEC-1139], <sequence-number>,, ERROR, <system-name>, The
RSNMP_POLICY cannot exist without the WSNMP_POLICY.
Probable Cause
Indicates that the receiving switch fails to validate the security database sending from the primary
fabric configurations server (FCS) switch. This message usually indicates that the data package is
corrupted, the time stamp on the package is out of range as a result of a replay attack or
out-of-sync time service, or the signature verification failed. Signature verification failure indicates
either an internal error (such as losing the primary public key) or an invalid database.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
Action
be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that switch. This message might also be the result of an internal corruption or a hacker attack
to the secure fabric.
Severity
ERROR

SEC-1142

Message
<timestamp>, [SEC-1142], <sequence-number>,, INFO, <system-name>, Reject new
policies.
Probable Cause
Indicates that the new polices are rejected due to the reason specified.
Recommended
Use proper syntax when entering policy information.
Action
Severity
INFO

SEC-1145

Message
<timestamp>, [SEC-1145], <sequence-number>,, INFO, <system-name>, A security
admin event has occurred. This message is for information purpose only. The
message for individual event is:
Probable Cause
Indicates one of the following has occurred:
Recommended
Verify that the security event was planned. If the security event was planned, no action is required.
Action
If the security event was not planned, take appropriate action as defined by your enterprise
security policy.
Severity
INFO
368
<reason text>
The names for the specified policies have changed.
The passwords have changed for the specified accounts.
The SNMP community strings have been changed.
.
<Event specific data>
Fabric OS Message Reference
53-1000437-01

Advertisement

Table of Contents
loading

Table of Contents