Fssm-1004 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

26

FSSM-1004

FSSM-1004
Message
<timestamp>, [FSSM-1004], <sequence-number>,, INFO, <system-name>, Incompatible
software version in HA synchronization.
Probable Cause Indicates that the active control processor (CP) and the standby CP in a dual CP system are running
firmware that are incompatible with each other. If the active CP fails, the failover will be disruptive.
In a non-bladed system, this message is logged when the firmware upgrade/downgrade was
invoked. The new firmware version is not compatible with current running version. This cause a
disruptive firmware upgrade/downgrade.
Recommended For a dual CP system, run the firmwareDownload command to load compatible firmware on the
Action standby CP. For details on this command, refer to the Fabric OS Command Reference.
Severity INFO
154 Fabric OS Message Reference
53-1000437-01