Sec-1190; Sec-1191; Sec-1192 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference
Brocade fabric os message reference - supporting fabric os v5.3.0 (53-1000437-01, june 2007)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Administrator's manual (452 pages)
Table of Contents
Advertisement
SEC-1190
Message
<timestamp>, [SEC-1190], <sequence-number>,, INFO, <system-name>, Security
violation: Unauthorized host with IP address
operation.
Probable Cause
Indicates that an SNMP security violation was reported. The specified unauthorized host attempted
to perform a read SNMP operation.
Recommended
Check the RSNMP policy to verify that hosts allowed access to the fabric through SNMP read
Action
operations are included in the RSNMP policy. If the host is allowed access but is not included in the
RSNMP policy, add the host to the policy. If the host is not allowed access to the fabric, this is a
valid violation message and an unauthorized entity is trying to access your fabric. Take appropriate
action, as defined by your enterprise security policy.
Severity
INFO
SEC-1191
Message
<timestamp>, [SEC-1191], <sequence-number>,, INFO, <system-name>, Security
violation: Unauthorized host with IP address
HTTP connection.
Probable Cause
Indicates that an HTTP security violation was reported. The specified unauthorized host attempted
to establish an HTTP connection.
Recommended
Check if the host IP address specified in the message can be used to manage the fabric through an
Action
HTTP connection. If so, add the host IP address to the HTTP policy of the fabric. If the host is not
allowed access to the fabric, this is a valid violation message and an unauthorized entity is trying to
access your fabric. Take appropriate action, as defined by your enterprise security policy.
Severity
INFO
SEC-1192
Message
<timestamp>, [SEC-1192], <sequence-number>,, INFO, <system-name>, Security
violation: Login failure attempt via
Probable Cause
Indicates that a serial or modem login security violation was reported. An incorrect password was
used while trying to log in through a serial or modem connection; the login failed.
Recommended
Use the correct password.
Action
Severity
INFO
Fabric OS Message Reference
53-1000437-01
<IP address>
<Ip address>
<connection method>
63
SEC-1190
tries to do SNMP read
tries to establish
.
379
Advertisement
Table of Contents
