63
SEC-1077
SEC-1077
Message
<timestamp>, [SEC-1077], <sequence-number>,, ERROR, <system-name>, Failed to
activate new policy set on all switches.
Probable Cause
Indicates that the policy could not be activated. Possible reasons that the policy could not be
activate include not enough memory or a busy switch.
Recommended
Run the secFabricShow command to verify that all switches in the fabric are in the ready state.
Action
Retry the command when all switches are ready.
Severity
ERROR
SEC-1078
Message
<timestamp>, [SEC-1078], <sequence-number>,, ERROR, <system-name>, No new data to
abort.
Probable Cause
Indicates that there are no new changes in the defined security policy database that can be
aborted.
Recommended
Verify that security event was planned. Verify if there were really any changes to the defined policy
Action
database that can be aborted.
Severity
ERROR
SEC-1079
Message
<timestamp>, [SEC-1079], <sequence-number>,, ERROR, <system-name>, The policy
name
Probable Cause
Indicates that the policy name entered in the secPolicyCreate|Activate|Add|Delete command was
invalid.
Recommended
Run the command again using a valid policy name.
Action
Severity
ERROR
352
<policy name>
is invalid.
Fabric OS Message Reference
53-1000437-01