77
ZONE-1031
ZONE-1031
Message
<timestamp>, [ZONE-1031], <sequence-number>,, ERROR, <system-name>, Switch is in
interop mode. (switch, port) members not supported.
Probable Cause
The switch is set to interop mode using the interopMode command. Interop mode does not allow
<domain, portarea> members in the active zone database.
Recommended
Remove all <domain, portarea> members from the zone database, or convert them to world-wide
Action
name (WWN) zoning.
Severity
ERROR
ZONE-1032
Message
<timestamp>, [ZONE-1032], <sequence-number>,, ERROR, <system-name>, Domain
<domain number> Max Zone DB size <max zone db size>.
Probable Cause
Indicates that the specified domain does not have enough memory for the zone database being
committed.
Recommended
Reduce the size of the zone database and retry the operation.
Action
Severity
ERROR
ZONE-1033
Message
<timestamp>, [ZONE-1033], <sequence-number>,, ERROR, <system-name>, Domain
<domain number>
Probable Cause
Indicates that the specified domain has the lowest memory available for the zone database in the
fabric. The zone database must be smaller than the memory available on this domain.
Recommended
Reduce the size of the zone database and retry the operation.
Action
Severity
ERROR
452
Lowest Max Zone DB size.
Fabric OS Message Reference
53-1000437-01