Conf-1000; Conf-1001; Conf-1020; Conf System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

Brocade fabric os message reference guide v6.2.0 (53-1001157-01, april 2009)

Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:

Table of Contents

CONF-1000

<timestamp>, [CONF-1000], <sequence-number>, AUDIT, INFO, <system-name>,

configDownload completed successfully. <Info about the parameters and AD>.

Probable Cause

Indicates that the configDownload operation was initiated and completed successfully. The

statement that follows, message strings, is the description of the classes of configuration

parameters that were downloaded. If Admin Domain (AD) is enabled, the AD number is specified in

the description.

No action is required.

<timestamp>, [CONF-1001], <sequence-number>,, INFO, <system-name>, configUpload

completed successfully. <Info about the parameters and AD>.

Probable Cause

Indicates that the configUpload operation was initiated and completed successfully. The statement

that follows, message strings, is the description of the classes of configuration parameters that

were uploaded. If AD is enabled, the AD number is specified in the description.

No action is required.

<timestamp>, [CONF-1020], <sequence-number>,, INFO, <system-name>, configDownload

not permitted <AD Number if AD is configured on the system>.

Probable Cause

Indicates a configDownload operation is not permitted. There are many possible causes.

Check the error log, correct the error and rerun configdownload.

Fabric OS Message Reference

53-1001157-01

Table of Contents