Fw-1310; Fw-1311; Fw-1312 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference
Brocade fabric os message reference - supporting fabric os v5.3.0 (53-1000437-01, june 2007)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Administrator's manual (452 pages)
Table of Contents
Advertisement
27
FW-1310
FW-1310
Message
<timestamp>, [FW-1310], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause
Indicates that the number of simple network management protocol read (RSNMP) violations has
risen above the high boundary. RSNMP violations indicate that an SNMP "get" operation request
has been received from an unauthorized IP address.
Recommended
Run the errShow command to determine the IP address that sent the request. Responses to
Action
security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity
WARNING
FW-1311
Message
<timestamp>, [FW-1311], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the number of simple network management protocol read (RSNMP) violations has
changed from a value outside of the acceptable range to a value within the acceptable range.
RSNMP violations indicate that an SNMP "get" operation request has been received from an
unauthorized IP address.
Recommended
No action is required.
Action
Severity
INFO
FW-1312
Message
<timestamp>, [FW-1312], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause
Indicates that the number of simple network management protocol write (WSNMP) violations has
changed. WSNMP violations indicate that an SNMP "get/set" operation request has been received
from an unauthorized IP address.
Recommended
Run the errShow command to determine the IP address that sent the request. Responses to
Action
security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity
INFO
200
Fabric OS Message Reference
53-1000437-01
Advertisement
Table of Contents
