Ms-1005; Ms-1006; Ms-1008 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

Severity INFO

MS-1005

Message
<timestamp>, [MS-1005], <sequence-number>,, ERROR, <system-name>, MS Invalid CT
Response from d=
Probable Cause Indicates that the management server (MS) received an invalid common transport (CT) response
from switch domain. MS expects either a CT accept IU or a reject IU; MS received neither response,
which violates the Fibre Channel Generic Services (FS-GS) specification.
Recommended Check the integrity of the FC switch at the specified domain. It is not sending correct MS
Action information as defined by the FC-FS standard.
Severity ERROR

MS-1006

Message
<timestamp>, [MS-1006], <sequence-number>,, ERROR, <system-name>, MS Unexpected
iu_data_sz=
Probable Cause Indicates that management server (MS) received information unit (IU) data of unexpected size. The
IU payload and the IU size might be inconsistent with each other or with the command that is
currently being processed.
Recommended Wait a few minutes and try the operation again.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR

MS-1008

Message
<timestamp>, [MS-1008], <sequence-number>,, ERROR, <system-name>, MS Failure
while initializing
Probable Cause The management server (MS) failed while initializing the specified action.
The following actions might be displayed:
•
•
Recommended This message is often transitory.
Action
If the message persists, check the available memory on the switch using memShow.
Severity ERROR
Fabric OS Message Reference
53-1000437-01
<domain>
<number of bytes>
<action>
<while writing to ms_els_q>
MS is unable to write a message to the MS Extended Link Service Queue.
<while inserting timer to timer list>
MS is unable to add a timer to a resource.
48
MS-1005
295