Fw-1437; Fw-1438; Fw-1439 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

FW-1437

Message
<timestamp>, [FW-1437], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor faulty ports: <Num of faulty ports>. (Port(s)
<unknown>.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
faulty ports is greater than or equal to the policy set by the switchStatusPolicySet command. A port
is considered faulty due to hardware failure such as a faulty small form-factor pluggable (SFP) or
port.
Recommended Replace any faulty or deteriorating small form-factor pluggables (SFPs).
Action
Severity WARNING

FW-1438

Message
<timestamp>, [FW-1438], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Missing SFPs:
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
missing small form-factor pluggables (SFPs) is greater than or equal to the policy set by the
switchStatusPolicySet command.
Recommended Run the switchStatusPolicySet command to modify the SFP policy or to add SFPs to the empty
Action ports.
Severity WARNING

FW-1439

Message
<timestamp>, [FW-1439], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Switch offline.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the switch is
offline.
Recommended Run the switchEnable command.
Action
Severity WARNING
Fabric OS Message Reference
53-1000437-01
<Num of missing SFPs>
27
FW-1437
missing SFPs.
231