Fw-1123; Fw-1124; Fw-1125 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference
Brocade fabric os message reference - supporting fabric os v5.3.0 (53-1000437-01, june 2007)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Administrator's manual (452 pages)
Table of Contents
Advertisement
27
FW-1123
FW-1123
Message
<timestamp>, [FW-1123], <sequence-number>,, INFO, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause
Indicates that the number of domain ID changes has risen above the high boundary. Domain ID
changes occur when there is a conflict of domain IDs in a single fabric and the principal switch has
to assign another domain ID to the switch.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
FW-1124
Message
<timestamp>, [FW-1124], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the number of domain ID changes has changed from a value outside of the
acceptable range to a value within the acceptable range. Domain ID changes occur when there is a
conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to
the switch.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
FW-1125
Message
<timestamp>, [FW-1125], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause
Indicates that the number of segmentations has changed. Segmentation changes might occur due
to:
•
•
•
•
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
170
Zone conflicts.
Domain conflicts.
Segmentation of the principal link between two switches.
Incompatible link parameters. During E_Port initialization, ports exchange link parameters.
Rarely, incompatible parameters result in segmentation.
Fabric OS Message Reference
53-1000437-01
Advertisement
Table of Contents
