Sec-3003; Sec-3004; Sec-3005 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference
Brocade fabric os message reference - supporting fabric os v5.3.0 (53-1000437-01, june 2007)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Administrator's manual (452 pages)
Table of Contents
Advertisement
81
SEC-3003
SEC-3003
Message
AUDIT, <timestamp>, [SEC-3003], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: Created <Policy
Name> policy, with member(s) <Member List> .
Probable Cause
Indicates that a new security policy was created with entries.
Note: If you use a wildcard (for example, an asterisk) in creating a policy, the audit report displays
the wildcard in the event info field.
Recommended
Verify that the new policy creation was planned. If the new policy creation was planned, no action is
Action
required. If the new policy creation was not planned, take appropriate action as defined by your
enterprise security policy.
Severity
INFO
SEC-3004
Message
AUDIT, <timestamp>, [SEC-3004], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: Created <Policy
name> policy.
Probable Cause
Indicates that a new security policy was created.
Note: If you use a wildcard (for example, an asterisk) in creating a member for a policy, the audit
message displays the wildcard in the event info field.
Recommended
Verify that the new policy creation was planned. If the new policy creation was planned, no action is
Action
required. If the new policy creation was not planned, take appropriate action as defined by your
enterprise security policy.
Severity
INFO
SEC-3005
Message
AUDIT, <timestamp>, [SEC-3005], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: Added member(s)
<Members added> to policy <Policy name>.
Probable Cause
Indicates that new member(s) have been added to the specified security policy.
Note: If you use a wildcard (for example, an asterisk) in adding members to a policy, the audit
report displays the wildcard in the event info field.
Recommended
Verify that the addition of members to the policy was planned. If the addition of members was
Action
planned, no action is required. If the addition of members was not planned, take appropriate
action as defined by your enterprise security policy.
Severity
INFO
466
Fabric OS Message Reference
53-1000437-01
Advertisement
Table of Contents
