Zone-1034; Zone-1035; Zone-1036 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

ZONE-1034

Message
<timestamp>, [ZONE-1034], <sequence-number>,, WARNING, <system-name>, Zoning file
doesn't exist or Corrupted Zoning files detected before reboot, currently the file
is saved at
Probable Cause Indicates that the zone database is corrupt or zone database is not found.
Recommended Use the firmwareDownload command to reinstall the firmware.
Action
Severity WARNING

ZONE-1035

Message
<timestamp>, [ZONE-1035], <sequence-number>,, ERROR, <system-name>, Unable to
rename <Old config file name> to <New config file name>: error message <System
Error Message>
Probable Cause Indicates that the Fabric OS cannot rename the zone configuration file. Typically the zone
configuration is too large for the memory available on the switch.
Recommended Reduce the size of the zone database and retry the operation.
Action
Severity ERROR

ZONE-1036

Message
<timestamp>, [ZONE-1036], <sequence-number>,, ERROR, <system-name>, Unable to
create <config file name>: error message <System Error Message>
Probable Cause Indicates that the Fabric OS cannot create the zone configuration file. Typically the zone
configuration is too large for the memory available on the switch.
Recommended Reduce the size of the zone database and retry the operation.
Action
Severity ERROR
Fabric OS Message Reference
53-1000437-01
<config file name>
77
ZONE-1034
453