Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference page 450

Brocade fabric os message reference - supporting fabric os v5.3.0 (53-1000437-01, june 2007)
Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:
Table of Contents

Advertisement

66
SULB-1009
TABLE 6
Status Message
"Standby CP booted up."
"Active and Standby CP failed to gain HA synchronization within 10 minutes."
"Standby rebooted successfully."
"Standby failed to reboot."
"firmwareCommit has started to restore the secondary partition."
"Local CP is restoring its secondary partition."
"Unable to restore the secondary partition. Please use firmwareDownloadStatus and
firmwareShow to see firmware status."
"firmwareDownload has started on Standby CP. It might take up to 10 minutes."
"firmwareDownload has completed successfully on Standby CP."
"Standby CP reboots."
"Standby CP failed to boot up."
"Standby CP booted up with new firmware."
"Standby CP failed to boot up with new firmware."
"firmwareDownload has completed successfully on Standby CP."
"firmwareDownload has started on Standby CP. It might take up to 10 minutes."
"firmwareDownload has completed successfully on Standby CP."
"Standby CP reboots."
"Standby CP failed to reboot."
"firmwareCommit has started on Standby CP."
"firmwareCommit has completed successfully on Standby CP."
"Standby CP booted up with new firmware."
"Standby CP failed to boot up with new firmware."
"firmwareCommit has started on both Active and Standby CPs."
"firmwareCommit has completed successfully on both CPs."
"firmwareCommit failed on Active CP."
"The original firmware has been restored successfully on Standby CP."
"Unable to restore the original firmware on Standby CP."
"Standby CP reboots."
"Standby CP failed to reboot."
"Standby CP booted up with new firmware."
"Standby CP failed to boot up with new firmware."
"There was an unexpected reboot during firmwareDownload. The command is aborted."
"Standby CP was not responding. The command is aborted."
"firmwareCommit has started on both CPs. Please use firmwareDownloadStatus and
firmwareShow to see the firmware status."
402
Status Messages and Status Codes
Status Code
0x65
0x66
0x67
0x68
0x69
0x6a
0x6b
0x6c
0x6d
0x6e
0x6f
0x70
0x71
0x72
0x73
0x74
0x75
0x76
0x77
0x78
0x79
0x7a
0x7b
0x7c
0x7d
0x7e
0x7f
0x80
0x81
0x82
0x83
0x84
0x85
0x86
Fabric OS Message Reference
53-1000437-01

Advertisement

Table of Contents
loading

Table of Contents