FW-1044
Message
<timestamp>, [FW-1044], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the transmit power value of the small form-factor pluggable (SFP) has changed from
a value outside of the acceptable range to a value within the acceptable range. The transmit
performance area measures the amount of outgoing laser to help you determine if the SFP is in
good working condition or not. If the counter often exceeds the threshold, the SFP is deteriorating.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
FW-1045
Message
<timestamp>, [FW-1045], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause
Indicates that the value of the small form-factor pluggable (SFP) voltage has changed. If the
supplied voltage of the SFP transceiver is outside of the normal range, this might indicate a
hardware failure.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation. Frequent messages indicate that you must replace the SFP.
Severity
INFO
FW-1046
Message
<timestamp>, [FW-1046], <sequence-number>,, WARNING, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause
Indicates that the value of the small form-factor pluggable (SFP) voltage has fallen below the low
boundary.
Recommended
Verify that your optical components are clean and function properly. Replace deteriorating cables
Action
or SFPs. Check for damage from heat or age.
Severity
WARNING
Fabric OS Message Reference
53-1000437-01
27
FW-1044
163