Zone-1022; Zone-1023; Zone-1024 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

ZONE-1022

Message
<timestamp>, [ZONE-1022], <sequence-number>,, INFO, <system-name>, The effective
configuration has changed to <Effective configuration name>. <AD Id>
Probable Cause Indicates that the effective zone configuration has changed to the name displayed.
Recommended Verify that this zone configuration change was done on purpose. If the new effective zone
Action configuration is correct, no action is necessary.
Severity INFO

ZONE-1023

Message
<timestamp>, [ZONE-1023], <sequence-number>,, INFO, <system-name>, Switch
connected to port (
Probable Cause Indicates that the switch is retrying the merge operation. This usually occurs if the switch on the
other side of the port is busy.
Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
Action supportSave command and contact your switch service provider.
Severity INFO

ZONE-1024

Message
<timestamp>, [ZONE-1024], <sequence-number>,, INFO, <system-name>,
message>.
Probable Cause Indicates that the cfgSave command ran successfully. The <Information message> is "cfgSave
completes successfully."
Recommended No action is required.
Action
Severity INFO
Fabric OS Message Reference
53-1000437-01
<port number>
) is busy. Retry zone merge.
77
ZONE-1022
<Information
449