Snmp-1005; Snmp-1004; Snmp-1006; Audit Snmp System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

AUDIT SNMP System Messages

SNMP-1004

Message
AUDIT, <timestamp>, [SNMP-1004], ERROR, CONFIGURATION, <event-initiator-details>,
<event-location>, , Incorrect SNMP configuration.
Probable Cause Indicates that the simple network management protocol (SNMP) configuration s incorrect and the
SNMP service will not work correctly.
Recommended Reset the SNMP configuration to default.
Action
Severity ERROR

SNMP-1005

Message
AUDIT, <timestamp>, [SNMP-1005], INFO, CONFIGURATION, <event-initiator-details>,
<event-location>, , SNMP configuration attribute, <Changed attribute>, has
changed from <Old Value> to <New Value>
Probable Cause Indicates that the simple network management protocol (SNMP) configuration has changed as
indicated. The parameter that was modified is displayed as well as the old and new values for
that parameter.
Recommended Execute the snmpConfig --show command to display the new configuration.
Action
Severity INFO

SNMP-1006

Message
AUDIT, <timestamp>, [SNMP-1006], INFO, CONFIGURATION, <event-initiator-details>,
<event-location>, ,
default.
Probable Cause Indicates that the simple network management protocol (SNMP) configuration group was reset to
the factory default.
Recommended Execute the snmpConfig --show command to display the new group configuration.
Action
Severity INFO
Fabric OS Message Reference
53-1000437-01
<SNMP Configuration group>
configuration was reset to
Chapter
82
479