Mfic-1003 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

45

MFIC-1003

MFIC-1003
Message
<timestamp>, [MFIC-1003], <sequence-number>,, WARNING, <system-name>, Effective
Insistent domain ID for the fabric changed from <state> to <state>
Probable Cause Indicates that one or more switches joined the fabric with a different insistent domain ID (IDID)
mode setting than the current effective IDID mode for the fabric. This message also occurs when
the IDID for the fabric has been turned on or off. The possible values for state are "On" or "Off".
Recommended IDID mode is a fabric-wide mode; make sure that any switches added to the fabric are configured
Action with the same IDID mode as the fabric. If you are enabling or disabling IDID mode, this message is
for information purposes only, and no action is required.
IDID mode can be set using the configure command in the CLI or checking the Advanced Web Tools
Switch Admin > Configure Tab > Fabric Subtab > Insistent Domain ID Mode checkbox. The switch
must be disabled to change the IDID mode.
Severity WARNING
288 Fabric OS Message Reference
53-1000437-01