Fw-1322; Fw-1323; Fw-1324 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference
Brocade fabric os message reference - supporting fabric os v5.3.0 (53-1000437-01, june 2007)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Administrator's manual (452 pages)
Table of Contents
Advertisement
27
FW-1322
FW-1322
Message
<timestamp>, [FW-1322], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause
Indicates that the number of simple network management server (MS) violations has risen above
the high boundary. MS violations indicate that a MS access request has been received from an
unauthorized world-wide name (WWN). The MS_POLICY contains a list of WWNs of device ports
that are allowed to access the Management Server functionality.
Recommended
Run the errShow command to determine the WWN of the device that sent the request. Responses
Action
to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
Severity
WARNING
FW-1323
Message
<timestamp>, [FW-1323], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the number of simple network management server (MS) violations has changed
from a value outside of the acceptable range to a value within the acceptable range. MS violations
indicate that a MS access request has been received from an unauthorized world-wide name
(WWN). The MS_POLICY contains a list of WWNs of device ports that are allowed to access the
Management Server functionality.
Recommended
No action is required.
Action
Severity
INFO
FW-1324
Message
<timestamp>, [FW-1324], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause
Indicates that the number of serial violations has changed. Serial violations indicate that an
unauthorized serial port request has been received. The SERIAL_POLICY contains a list of switch
world-wide names (WWNs) for which serial port access is enabled.
Recommended
Run the errShow command to determine the WWN of the device that sent the request. Responses
Action
to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
Severity
INFO
204
Fabric OS Message Reference
53-1000437-01
Advertisement
Table of Contents
