Sulb-1034; Sulb-1035; Sulb-1036; Sulb-1037 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

Severity WARNING

SULB-1034

Message
<timestamp>, [SULB-1034], <sequence-number>, AUDIT, ERROR, <system-name>,
Firmwaredownload timed out.
Probable Cause The error may be caused by a switch initialization issue after the internal image is relocated. It may
also be caused by an internal Ethernet issue or by persistent storage failure.
Recommended Reboot the switch. This will cause the internal image to be relocated again. Use the
Action firmwareDownloadStatus to monitor the progress. If the problem persists, contact your switch
service provider.
Severity ERROR

SULB-1035

Message
<timestamp>, [SULB-1035], <sequence-number>, AUDIT, ERROR, <system-name>, An
error has occurred during relocation of the internal image.
Probable Cause Indicates that an error has occurred during the relocation of the internal image. The error may be
caused by inconsistent internal firmware image. It may also be caused by the internal Ethernet or
persistent storage hardware failure.
Recommended Reset the switch. This will cause the internal image to be relocated again. If the problem persists,
Action contact your switch service provider.
Severity ERROR

SULB-1036

Message
<timestamp>, [SULB-1036], <sequence-number>,, INFO, <system-name>,
being logged><Version String>
Probable Cause Indicates the firmware version running in the system. This is generally logged before download and
after download of the firmware to store version information.
Recommended No action is required.
Action
Severity INFO

SULB-1037

Message
<timestamp>, [SULB-1037], <sequence-number>, AUDIT, INFO, <system-name>, HCL
failed. Reboot the switch manually using the reboot command. However, it will
disrupt the FC traffic.
Fabric OS Message Reference
53-1000437-01
66
SULB-1034
<The Version
411