Sec-1321; Sec-1322; Sec-1323 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

SEC-1321

Message
<timestamp>, [SEC-1321], <sequence-number>,, ERROR, <system-name>, Failed secure
mode enable command. Reason:
Probable Cause Indicates that the security enable failed on the fabric because switch has conflicting configuration
such as fabric wide consistency configuration or AD configuration.
Recommended Verify that the security event was planned.
Action
If the security event was planned, run the fddcfg --fabwideset "" command or ad --clear
command to clear the fabric wide consistency configuration or AD configuration and retry the
secModeEnable command.
Severity ERROR

SEC-1322

Message
<timestamp>, [SEC-1322], <sequence-number>,, WARNING, <system-name>, Some DCC
policy is too large, distribution cancelled
Probable Cause Indicates that this fabric is not able to support a device connection control (DCC) policy with more
than 256 ports.
Recommended Reconfigure any policy that includes more than 256 ports in its member list, then save the policy
Action configuration changes.
Severity WARNING

SEC-1323

Message
<timestamp>, [SEC-1323], <sequence-number>,, INFO, <system-name>, Key(s) \"
Name>
Probable Cause Indicates that the specified key is ignored during configDownload.
Recommended Verify that the event was planned. If the event was planned, no action is required. If the event was
Action not planned, take appropriate action as defined by your enterprise security policy.
Severity INFO
Fabric OS Message Reference
53-1000437-01
\" ignored during configdownload.
<Reason>
.
63
SEC-1321
<Key
391