Lsdb-1001; Lsdb-1002; Lsdb-1003; Lsdb System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

LSDB System Messages

LSDB-1001

Message
<timestamp>, [LSDB-1001], <sequence-number>,, ERROR, <system-name>, Link State ID
<link state ID>
Probable Cause Indicates that the specified link state database ID is out of the acceptable range. The valid link
state ID is the same as the valid domain ID, whose range is from 1 through 239. The switch will
discard the record because it is not supported.
Recommended No action is required.
Action
Severity ERROR

LSDB-1002

Message
<timestamp>, [LSDB-1002], <sequence-number>,, INFO, <system-name>, Local Link
State Record reached max incarnation#
Probable Cause Indicates that the local link state database reached the maximum incarnations.
An "incarnation" is a progressive number that identifies the most recent version of the LSR (link
state record). The switch generates its local link state record when first enabled.
The incarnation number will begin again at 0x80000001 after reaching 0x7FFFFFFF.
Recommended No action is required.
Action
Severity INFO

LSDB-1003

Message
<timestamp>, [LSDB-1003], <sequence-number>, FFDC, CRITICAL, <system-name>, No
database entry for local Link State Record, domain
Probable Cause Indicates that there is no local link state record entry in the link state database. The switch should
always generate its own local entry when starting up.
An "incarnation" is a progressive number that identifies the most recent version of the LSR (link
state record). The switch generates its local link state record when first enabled. By disabling and
enabling the switch, a new local link state record is generated.
Fabric OS Message Reference
53-1000437-01
out of range
<local domain>
Chapter
44
285