Page 1 53-1001156-01 24 November 2008 Fabric OS MIB Reference Supporting Fabric OS v3.1.x, v3.2.x, v4.1.x, v4.2.x, v4.4.x, v5.0.x, v5.1.x, v5.2.x, v5.3.x, v6.0.0, v6.1.0, v6.2.0...
Page 2 Copyright © 2007-2008 Brocade Communications Systems, Inc. All Rights Reserved. Brocade, Fabric OS, File Lifecycle Manager, MyView, and StorageX are registered trademarks and the Brocade B-wing symbol, DCX, and SAN Health are trademarks of Brocade Communications Systems, Inc., in the United States and/or in other countries. All other brands, products, or service names are or may be trademarks or service marks of, and are used to identify, products or services of their respective owners.
Page 3 Document History Document Title Publication Number Summary of Changes Publication Date Brocade MIB Reference Manual v2.3 53-0000069-02 December 2000 Brocade MIB Reference Manual v3.0 53-0000134-03 July 2001 Brocade MIB Reference Manual v3.0, 4.0 53-0000184-02 March 2002 Brocade MIB Reference Manual 53-0000521-02 Added Brocade-specific April 2003...
Page 5: Table Of Contents
Contents About This Document In this chapter ..........xi How this document is organized .
Page 6 Chapter 2 MIB-II (RFC1213-MIB) MIB II Overview ......... . 13 System Group .
Page 7 Logical Entity Group ........480 Entity Mapping Group .
Page 8 ficonRNID Group ........811 ficonLIRR Group .
Page 9 ISL and End Device Variables......1196 SNMP Configuration Variables ......1196 iSCSI Instance Information Variables .
Page 10 Fabric OS MIB Reference 53-1001156-01...
Page 11: About This Document
About This Document In this chapter • How this document is organized ........xi •...
Page 12: Supported Hardware And Software
Supported hardware and software In those instances in which procedures or parts of procedures documented here apply to some switches but not to others, this guide identifies exactly which switches are supported and which are not. Although many different software and hardware configurations are tested and supported by Brocade Communications Systems, Inc.
Page 13: Document Conventions
• FC8-32 Blade • FC8-48 Blade What’s new in this document The following changes have been made since this document was last released: • Information that was added: Support for Brocade DCX-4S and Brocade Encrytion Switch swTopTalker MIB Support for Virtual Fabric New attributes added to the following: •...
Page 14: Key Terms
For readability, command names in the narrative portions of this guide are presented in mixed lettercase: for example, switchShow. In actual examples, command lettercase is often all lowercase. Otherwise, this manual specifically notes those cases in which a command is case sensitive.
Page 15: Additional Information
Corporation Referenced Trademarks and Products Microsoft Corporation Windows, Windows NT, Internet Explorer Sun Microsystems, Inc. Sun, Solaris Additional information This section lists additional Brocade and industry-specific documentation that you might find helpful. Brocade resources To get up-to-the-minute information, join Brocade Connect. It’s free! Go to http://www.brocadeconnect.com to register at no cost for a user ID and password.
Page 16: Document Feedback
• Description of any troubleshooting steps already performed and the results • Serial console and Telnet session logs • Syslog message logs 2. Switch Serial Number The switch serial number and corresponding bar code are provided on the serial number label, as shown here: *FT00X0054E9* FT00X0054E9...
Page 17: In This Chapter
Chapter Understanding Brocade SNMP In this chapter • Setting the SNMP Security Level ........1 •...
Page 18: Understanding Snmp Basics
Understanding SNMP Basics TABLE 1 Security Level Options (Continued) security level Protocol Query Behavior Traps Authentication and SNMPv1 Not allowed. Not Sent. Privacy [2] SNMPv3 Only SNMPv3 users with authPriv Sent only for authPriv users. (authPriv) privilege are allowed. No Access [3] SNMPv1 Not allowed.
Page 19: Understanding Mibs
Understanding SNMP Basics Understanding MIBs The management information base (MIB) is a database of monitored and managed information on a device, in this case a Brocade switch. The MIB structure can be represented by a tree hierarchy. The root splits into three main branches: International Organization for Standardization (ISO), Consultative Committee for International Telegraph and Telephone (CCITT), and joint ISO/CCITT.
Page 20: Understanding Snmp Traps
Understanding SNMP Basics Brocade supports FE_RCF2837.mib under the MIB-II branch in Fabric OS v6.2.0, v6.1.0, v6.0.0, v4.x, v3.2.0, and v3.1.x and the experimental version, FE_EXP.mib, in Fabric OS v2.6.x and 3.0.x. This latest version of the FE MIB references the FRAMEWORK.MIB and, based on the MIB browser, it is necessary to load this MIB before the FE.MIB.
Page 21 Understanding SNMP Basics • connUnitPortStatusChange • connUnitEventTrap The MIB-II system description swEventTrapLevel determines the output for the connUnitEventTrap. Events in the Error Log of a severity at or above the configured threshold will generate SNMP traps. The Fibre Alliance Trap (FA-TRAP) can be configured to send traps using the snmpConfig command. Refer to the Fabric OS Command Reference for more information on this command.
Page 22: Object Instances
Loading Brocade MIBs Object Instances MIB objects are defined by the OID, which is the type of object, and by the instance number, which is an instance of that MIB object. A Fibre Channel port is a MIB object, and port 0 is an instance of that object.
Page 23: Mib Loading Order
Loading Brocade MIBs TABLE 2 Fabric OS Supported SNMP Versions Firmware SNMPv1 SNMPv2 SNMPv3 Fabric OS v2.6.2 and previous Fabric OS v3.2.0 and previous Fabric OS v4.2.0 and previous Fabric OS v4.4.0 Fabric OS v5.x Fabric OS v6.0.0 Fabric OS v6.1.0 Fabric OS v6.2.0 The corresponding Fabric OS has SNMPv2 capabilities, but it is not officially supported by Brocade.
Page 24: Snmp Cli Usage
Loading Brocade MIBs Select one or both Select one FA_v2_2.mib FE_EXP.mib FCMGMT-MIB FCFABRIC-ELEMENT-MIB FOS 2.6.x RFC1213-MIB MIB-II FE_RFC2837.mib FA_v3_0.mib FIBRE-CHANNEL-FE-MIB FCMGMT-MIB FOS 3.1.x, 4.x, 5.x FOS 3.x, 4.x, 5.x RFC1155-SMI FICON_v5_0.mib FICON-MIB BRCD_v5_0.mib FOS 4.x, 5.x Brocade-REG-MIB Brocade-TC FOS 2.6.x, 3.x, 4.x, 5.x SNMPv2-SMI INET-ADDRESS-MIB SW_v5_5.mib...
Page 25 Loading Brocade MIBs Configuring SNMPv3 User/Traps 1. Create user on switch using CLI userconfig, with the required role. switch:admin> userconfig --add fa_adm -r fabricadmin -h0 -a 0-255 Setting initial password for fa_adm Enter new password:******** Re-type new password:******** Account fa_adm has been successfully added. switch:admin>...
Page 26 Loading Brocade MIBs Trap Recipient's IP address : [0.0.0.0] Trap Recipient's IP address : [0.0.0.0] Trap Recipient's IP address : [0.0.0.0] Trap Recipient's IP address : [0.0.0.0] Committing configuration...done. switch:admin> switch:admin> snmpconfig --show snmpv3 SNMPv3 USM configuration: User 1 (rw): fa_adm Auth Protocol: MD5 Priv Protocol: DES User 2 (rw): snmpadmin2...
Page 27: Brocade 7500 / Fr4-18I And Brocade Mibs
Brocade 7500 / FR4-18i and Brocade MIBs Brocade 7500 / FR4-18i and Brocade MIBs Beginning with release Fabric OS 5.3.0, statistics are available for FCIP tunnels, VEX_Ports, or VE_Ports through the portstatsshow command. The changes in the sensor details for FR4-18i Blade has been incorporated into SNMP. The “connUnitSensorTable 1.3.6.1.3.94.1.8”...
Page 28: Fabric Os Commands For Configuring Snmp
Fabric OS Commands for Configuring SNMP Fabric OS Commands for Configuring SNMP Use the following commands to configure MIBs in the Fabric OS. Refer to the Fabric OS Administrator’s Guide for procedures for configuring SNMP on the Brocade switches. TABLE 4 Commands for Configuring SNMP Command Description...
Page 29: Mib Ii Overview
Chapter MIB-II (RFC1213-MIB) This chapter provides descriptions and other information specific to MIB-II, and includes the following sections: • MIB II Overview ..........13 •...
Page 30: Mib-Ii Object Hierarchy
MIB-II Object Hierarchy MIB-II Object Hierarchy Figure 6 through Figure 15 depicts the organization and structure of MIB-II. - iso - org - dod - internet - directory - mgmt - mib-2 - system - interfaces - at - ip - icmp - tcp - udp...
Page 31 MIB-II Object Hierarchy - interfaces (1.3.6.1.2.1.2) ifNumber 1.3.6.1.2.1.2.1 ifTable 1.3.6.1.2.1.2.2 ifEntry 1.3.6.1.2.1.2.2.1 ifIndex 1.3.6.1.2.1.2.2.1.1 ifDescr 1.3.6.1.2.1.2.2.1.2 ifType 1.3.6.1.2.1.2.2.1.3 ifMtu 1.3.6.1.2.1.2.2.1.4 ifSpeed 1.3.6.1.2.1.2.2.1.5 ifPhysAddress 1.3.6.1.2.1.2.2.1.6 ifAdminStatus 1.3.6.1.2.1.2.2.1.7 ifOperStatus 1.3.6.1.2.1.2.2.1.8 ifLastChange 1.3.6.1.2.1.2.2.1.9 ifInOctets 1.3.6.1.2.1.2.2.1.10 ifInUcastPkts 1.3.6.1.2.1.2.2.1.11 ifInNUcastPkts 1.3.6.1.2.1.2.2.1.12 ifInDiscards 1.3.6.1.2.1.2.2.1.13 ifInErrors 1.3.6.1.2.1.2.2.1.14 ifInUnknownProtos 1.3.6.1.2.1.2.2.1.15 ifOutOctets 1.3.6.1.2.1.2.2.1.16 ifOutUcastPkts 1.3.6.1.2.1.2.2.1.17...
Page 32 MIB-II Object Hierarchy - ip (1.3.6.1.2.1.4) ipForwarding 1.3.6.1.2.1.4.1 ipDefaultTTL 1.3.6.1.2.1.4.2 ipInReceives 1.3.6.1.2.1.4.3 ipInHdrErrors 1.3.6.1.2.1.4.4 ipInAddrErrors 1.3.6.1.2.1.4.5 ipForwDatagrams 1.3.6.1.2.1.4.6 ipInUnknownProtos 1.3.6.1.2.1.4.7 ipInDiscards 1.3.6.1.2.1.4.8 ipInDelivers 1.3.6.1.2.1.4.9 ipOutRequests 1.3.6.1.2.1.4.10 ipOutDiscards 1.3.6.1.2.1.4.11 ipOutNoRoutes 1.3.6.1.2.1.4.12 ipReasmTimeout 1.3.6.1.2.1.4.13 ipReasmReqds 1.3.6.1.2.1.4.14 ipReasmOKs 1.3.6.1.2.1.4.15 ipReasmFails 1.3.6.1.2.1.4.16 ipFragOKs 1.3.6.1.2.1.4.17 ipFragFails 1.3.6.1.2.1.4.18 ipFragCreates 1.3.6.1.2.1.4.19 ipAddrTable 1.3.6.1.2.1.4.20...
Page 33 MIB-II Object Hierarchy - icmp (1.3.6.1.2.1.5) icmpInMsgs 1.3.6.1.2.1.5.1 icmpInErrors 1.3.6.1.2.1.5.2 icmpInDestUnreachs 1.3.6.1.2.1.5.3 icmpInTimeExcds 1.3.6.1.2.1.5.4 icmpInParmProbs 1.3.6.1.2.1.5.5 icmpInSrcQuenchs 1.3.6.1.2.1.5.6 icmpInRedirects 1.3.6.1.2.1.5.7 icmpInEchos 1.3.6.1.2.1.5.8 icmpInEchoReps 1.3.6.1.2.1.5.9 icmpInTimestamps 1.3.6.1.2.1.5.10 icmpInTimestampReps 1.3.6.1.2.1.5.11 icmpInAddrMasks 1.3.6.1.2.1.5.12 icmpInAddrMaskReps 1.3.6.1.2.1.5.13 icmpOutMsgs 1.3.6.1.2.1.5.14 icmpOutErrors 1.3.6.1.2.1.5.15 icmpOutDestUnreachs 1.3.6.1.2.1.5.16 icmpOutTimeExcds 1.3.6.1.2.1.5.17 icmpOutParmProbs 1.3.6.1.2.1.5.18 icmpOutSrcQuenchs 1.3.6.1.2.1.5.19 icmpOutRedirects 1.3.6.1.2.1.5.20...
Page 34 MIB-II Object Hierarchy - tcp (1.3.6.1.2.1.6) tcpRtoAlgorithm 1.3.6.1.2.1.6.1 tcpRtoMin 1.3.6.1.2.1.6.2 tcpRtoMax 1.3.6.1.2.1.6.3 tcpMaxConn 1.3.6.1.2.1.6.4 tcpActiveOpens 1.3.6.1.2.1.6.5 tcpPassiveOpens 1.3.6.1.2.1.6.6 tcpAttemptFails 1.3.6.1.2.1.6.7 tcpEstabResets 1.3.6.1.2.1.6.8 tcpCurrEstab 1.3.6.1.2.1.6.9 tcpInSegs 1.3.6.1.2.1.6.10 tcpOutSegs 1.3.6.1.2.1.6.11 tcpRetransSegs 1.3.6.1.2.1.6.12 tcpConnTable 1.3.6.1.2.1.6.13 tcpConnEntry 1.3.6.1.2.1.6.13.1 tcpConnState 1.3.6.1.2.1.6.13.1.1 tcpConnLocalAddress 1.3.6.1.2.1.6.13.1.2 tcpConnLocalPort 1.3.6.1.2.1.6.13.1.3 tcpConnRemAddress 1.3.6.1.2.1.6.13.1.4 tcpConnRemPort 1.3.6.1.2.1.6.13.1.5 tcpInErrs 1.3.6.1.2.1.6.14...
Page 35 MIB-II Object Hierarchy - egp (1.3.6.1.2.1.8) Transmission Group - egpInErrors - egpOutMsgs - egpOutErrors - egpNeighTable - egpNeighEntry - egpNeighState - egpNeighAddr - egpNeighAs - egpNeighInMsgs - egpNeighInErrs - egpNeighOutMsgs - egpNeighOutErrs - egpNeighInErrMsgs - egpNeighOutErrMsgs - egpNeighStateUps - egpNeighStateDowns - egpNeighIntervalHello - egpNeighIntervalPoll - egpNeighMode...
Page 36 MIB-II Object Hierarchy - ifMIB (1.3.6.1.2.1.31) ifXTable 1.3.6.1.2.1.31.1.1 ifXentry 1.3.6.1.2.1.31.1.1.1 ifName 1.3.6.1.2.1.31.1.1.1.1 ifInMulticastPkts 1.3.6.1.2.1.31.1.1.1.2 ifInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.3 ifOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.4 ifOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.5 ifHCInOctets 1.3.6.1.2.1.31.1.1.1.6 ifHCInUcastPkts 1.3.6.1.2.1.31.1.1.1.7 ifHCInMulticastPkts 1.3.6.1.2.1.31.1.1.1.8 ifHCInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.9 ifHCOutOctets 1.3.6.1.2.1.31.1.1.1.10 ifHCOutUcastPkts 1.3.6.1.2.1.31.1.1.1.11 ifHCOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.12 ifHCOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.13 ifLinkUpDownTrapEnable 1.3.6.1.2.1.31.1.1.1.14 ifHigfSpeed 1.3.6.1.2.1.31.1.1.1.15 ifPromiscuousMode 1.3.6.1.2.1.31.1.1.1.16 ifConnectorPresent 1.3.6.1.2.1.31.1.1.1.17 ifAlias 1.3.6.1.2.1.31.1.1.1.18...
Page 37: Textual Conventions
Textual Conventions Textual Conventions Table 5 lists the textual conventions used for MIB-II. TABLE 5 MIB-II Textual Conventions Type Definition Value DisplayString Octet String of size 0 to 255 PhysAddress Octet String Objects and Types Imported The following objects and types are imported from RFC1155-SMI: •...
Page 38: System Group
System Group System Group All systems must implement the System Group. If an agent is not configured to have a value for any of the System Group variables, a string of length 0 is returned. sysDescr 1.3.6.1.2.1.1.1 A textual description of the entity. This value should include the full name and version identification of the hardware type, software operating system, and networking software.
Page 39 sysObjectID 1.3.6.1.2.1.1.2 sysObjectID 1.3.6.1.2.1.1.2 The vendor’s authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining what kind of device is being managed. Example If a vendor “NetYarn, Inc.”...
Page 40 sysUpTime 1.3.6.1.2.1.1.3 sysUpTime 1.3.6.1.2.1.1.3 The time (in hundredths of a second) since the network management portion of the system was last reinitialized. Set command Set this value using the switchuptime command. Fabric OS MIB Reference 53-1001156-01...
Page 41 sysContact 1.3.6.1.2.1.1.4 sysContact 1.3.6.1.2.1.1.4 The textual identification of the contact person for this managed node, together with information on how to contact this person. Default Field Support Set command Set this value using the snmpconfig command. Fabric OS MIB Reference 53-1001156-01...
Page 42 sysName 1.3.6.1.2.1.1.5 sysName 1.3.6.1.2.1.1.5 An administratively assigned name for this managed node. By convention, this is the node’s fully qualified domain name. Default Preassigned name of the logical switch. Set command Set this value using the snmpconfig command. Fabric OS MIB Reference 53-1001156-01...
Page 43 sysLocation 1.3.6.1.2.1.1.6 sysLocation 1.3.6.1.2.1.1.6 The physical location of this node (for example, telephone closet, 3rd floor). Default End User Premise Set command Set this value using the snmpconfig command. Fabric OS MIB Reference 53-1001156-01...
Page 44 sysServices 1.3.6.1.2.1.1.7 sysServices 1.3.6.1.2.1.1.7 A value that indicates the set of services that this entity primarily offers.The value is a sum. This sum initially takes the value 0. Then, for each layer, L, in the range 1 through 7, for which this node performs transactions, 2 raised to (L - 1) is added to the sum.
Page 45: Interfaces Group
Interfaces Group Interfaces Group Implementation of the Interfaces group is mandatory for all systems. FCIP tunnel support is added in Fabric OS 5.3.0 and higher. To support FCIP tunneling, entries are created in the ifTable for each WAN interface (GbE port), each FC port, and each FCIP tunnel (transport interface). Logical Inter Switch Link (LISL) is an FC interface.
Page 46 ifNumber 1.3.6.1.2.1.2.1 ifNumber 1.3.6.1.2.1.2.1 The number of network interfaces and existing FC ports present on this system, regardless of their current state. This number will vary across platforms (switches). The return value is dynamic for all Brocade switches and depends on the number of GbE ports, FC ports and transport interfaces.
Page 47 ifTable 1.3.6.1.2.1.2.2 ifTable 1.3.6.1.2.1.2.2 A list of interface entries. The number of entries is given by the value of ifNumber. The Interfaces table contains information on the entity’s interfaces. Each interface is thought of as being attached to a subnetwork. Note that this term should not be confused with subnet, which refers to an addressing partitioning scheme used in the Internet suite of protocols.
Page 48 ifEntry 1.3.6.1.2.1.2.2.1 ifEntry 1.3.6.1.2.1.2.2.1 An interface entry containing objects at the subnetwork layer and below, for a particular interface. Index ifIndex Fabric OS MIB Reference 53-1001156-01...
Page 49 ifIndex 1.3.6.1.2.1.2.2.1.1 ifIndex 1.3.6.1.2.1.2.2.1.1 A unique value for each interface. The values range between 1 and the value of ifNumber. The value for each interface must remain constant, at least from one reinitialization of the entity's network management system to the next reinitialization.
Page 50 ifDescr 1.3.6.1.2.1.2.2.1.2 ifDescr 1.3.6.1.2.1.2.2.1.2 A textual string containing information about the interface. The ifDescr for non-bladed switches includes: lo, eth0, and fc0. The ifDescr for Brocade 12000, 24000, and 48000 directors includes: lo, eth0, fc0, and sit0, as well as fc1, eth0:1, and eth0:2. •...
Page 51 ifType 1.3.6.1.2.1.2.2.1.3 ifType 1.3.6.1.2.1.2.2.1.3 The type of interface, designated by the physical/link protocol(s) immediately below the network layer in the protocol stack. • Values For WAN interface, FCIP Link- ethernetCsmacd (6) • For transport interface-fcipLink(224) • For FC ports- fibre channel (56) Fabric OS MIB Reference 53-1001156-01...
Page 52 ifMtu 1.3.6.1.2.1.2.2.1.4 ifMtu 1.3.6.1.2.1.2.2.1.4 The size of the largest datagram that can be sent/received on the interface, specified in octets. Values For interfaces that are used to transmit network datagrams, the value is the size of the largest network datagram that can be sent on the interface (these values are different for Fabric OS v4.x). •...
Page 53 ifSpeed 1.3.6.1.2.1.2.2.1.5 ifSpeed 1.3.6.1.2.1.2.2.1.5 An estimate (in bits per second) of the interface's current bandwidth. Values For interfaces that do not vary in bandwidth or interfaces for which no accurate estimation can be made, this object should contain the nominal bandwidth. For Fabric OS v4.x, 2 Gbps returns. •...
Page 54 ifPhysAddress 1.3.6.1.2.1.2.2.1.6 ifPhysAddress 1.3.6.1.2.1.2.2.1.6 The interface's address at the protocol layer immediately below the network layer in the protocol stack. Values For interfaces that do not have such an address (for example, a serial line), this object should contain an octet string of zero length. •...
Page 55 ifAdminStatus 1.3.6.1.2.1.2.2.1.7 ifAdminStatus 1.3.6.1.2.1.2.2.1.7 The desired state of the interface. • Values up (1) • down (2) or • testing (3) Supports Read only, should return same value with ifOperStatus for WAN and FC ports interfaces. NOTE The 3 state (testing) indicates that no operational packets can be passed. This object is read-only in Fabric OS v4.x and above.
Page 56 ifOperStatus 1.3.6.1.2.1.2.2.1.8 ifOperStatus 1.3.6.1.2.1.2.2.1.8 The current operational state of the interface. • Values up (1) • down (2) or • testing (3?) Active tunnels will be up; inactive tunnels will be down (configured but not online). NOTE .The 3 state (testing) indicates that no operational packets can be passed. Fabric OS MIB Reference 53-1001156-01...
Page 57 ifLastChange 1.3.6.1.2.1.2.2.1.9 ifLastChange 1.3.6.1.2.1.2.2.1.9 The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value. Fabric OS MIB Reference 53-1001156-01...
Page 58 ifInOctets 1.3.6.1.2.1.2.2.1.10 ifInOctets 1.3.6.1.2.1.2.2.1.10 The total number of octets received on the interface, including framing characters. Fabric OS MIB Reference 53-1001156-01...
Page 59 ifInUcastPkts 1.3.6.1.2.1.2.2.1.11 ifInUcastPkts 1.3.6.1.2.1.2.2.1.11 The number of subnetwork-unicast packets delivered to a higher-layer protocol. Not supported. Fabric OS MIB Reference 53-1001156-01...
Page 60 ifInNUcastPkts 1.3.6.1.2.1.2.2.1.12 ifInNUcastPkts 1.3.6.1.2.1.2.2.1.12 The number of nonunicast packets (for example, subnetwork-broadcast or subnetwork-multicast) delivered to a higher-layer protocol. Not supported. Fabric OS MIB Reference 53-1001156-01...
Page 61 ifInDiscards 1.3.6.1.2.1.2.2.1.13 ifInDiscards 1.3.6.1.2.1.2.2.1.13 The number of inbound packets that were chosen to be discarded (even though no errors had been detected) to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free buffer space. Fabric OS MIB Reference 53-1001156-01...
Page 62 ifInErrors 1.3.6.1.2.1.2.2.1.14 ifInErrors 1.3.6.1.2.1.2.2.1.14 The number of inbound packets that contained errors, which thereby prevented them from being deliverable to a higher-layer protocol. Fabric OS MIB Reference 53-1001156-01...
Page 63 ifInUnknownProtos 1.3.6.1.2.1.2.2.1.15 ifInUnknownProtos 1.3.6.1.2.1.2.2.1.15 The number of packets received by way of the interface that were discarded because of an unknown or unsupported protocol. Not supported. Fabric OS MIB Reference 53-1001156-01...
Page 64 ifOutOctets 1.3.6.1.2.1.2.2.1.16 ifOutOctets 1.3.6.1.2.1.2.2.1.16 The total number of octets transmitted out of the interface, including framing characters. Fabric OS MIB Reference 53-1001156-01...
Page 65 ifOutUcastPkts 1.3.6.1.2.1.2.2.1.17 ifOutUcastPkts 1.3.6.1.2.1.2.2.1.17 The total number of packets that were requested, by higher-level protocols, to be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. Not supported. Fabric OS MIB Reference 53-1001156-01...
Page 66 ifOutNUcastPkts 1.3.6.1.2.1.2.2.1.18 ifOutNUcastPkts 1.3.6.1.2.1.2.2.1.18 The total number of packets that were requested, by higher-level protocols, to be transmitted to a nonunicast address (for example, a subnetwork-broadcast or subnetwork-multicast), including those that were discarded or not sent. Not supported. Fabric OS MIB Reference 53-1001156-01...
Page 67 ifOutDiscards 1.3.6.1.2.1.2.2.1.19 ifOutDiscards 1.3.6.1.2.1.2.2.1.19 The number of outbound packets that were chosen to be discarded (even though no errors had been detected) to prevent their being transmitted. One possible reason for discarding such a packet could be to free buffer space. Fabric OS MIB Reference 53-1001156-01...
Page 68 ifOutErrors 1.3.6.1.2.1.2.2.1.20 ifOutErrors 1.3.6.1.2.1.2.2.1.20 The number of outbound packets that could not be transmitted because of errors. Fabric OS MIB Reference 53-1001156-01...
Page 69 ifOutQLen 1.3.6.1.2.1.2.2.1.21 ifOutQLen 1.3.6.1.2.1.2.2.1.21 The length of the output packet queue (in packets). Not supported. Fabric OS MIB Reference 53-1001156-01...
Page 70 ifSpecific 1.3.6.1.2.1.2.2.1.22 ifSpecific 1.3.6.1.2.1.2.2.1.22 A reference to MIB definitions specific to the particular media being used to realize the interface. If the interface is realized by an Ethernet, then the value of this object refers to a document defining objects specific to Ethernet. If this information is not present, its value should be set to the Object Identifier 0 0, which is a syntactically valid object identifier, and any conferment implementation of ASN.1 and BER must be able to generate and recognize this value.
Page 71: At Group
AT Group AT Group Implementation of the Address Translation group is mandatory for all systems. Note, however, that this group is deprecated by MIB-II. From MIB-II onward, each network protocol group contains its own address translation tables. Fabric OS MIB Reference 53-1001156-01...
Page 72 atTable 1.3.6.1.2.1.3.1 atTable 1.3.6.1.2.1.3.1 The Address Translation group contains one table, which is the union across all interfaces of the translation tables for converting a network address (for example, an IP address) into a subnetwork-specific address. This document refers to such a subnetwork-specific address as a physical address.
Page 73 atEntry 1.3.6.1.2.1.3.1.1 atEntry 1.3.6.1.2.1.3.1.1 Each entry contains one network address to physical address equivalence. Index atIfIndex, atNetAddress Fabric OS MIB Reference 53-1001156-01...
Page 74 atIfIndex 1.3.6.1.2.1.3.1.1.1 atIfIndex 1.3.6.1.2.1.3.1.1.1 The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. Fabric OS MIB Reference 53-1001156-01...
Page 75 atPhysAddress 1.3.6.1.2.1.3.1.1.2 atPhysAddress 1.3.6.1.2.1.3.1.1.2 The media-dependent physical address. Fabric OS MIB Reference 53-1001156-01...
Page 76 atNetAddress 1.3.6.1.2.1.3.1.1.3 atNetAddress 1.3.6.1.2.1.3.1.1.3 The network address (for example, the IP address) corresponding to the media-dependent physical address. Fabric OS MIB Reference 53-1001156-01...
Page 77: Ip Group
IP Group IP Group Implementation of the IP group is mandatory for all systems. Fabric OS MIB Reference 53-1001156-01...
Page 78 ipForwarding 1.3.6.1.2.1.4.1 ipForwarding 1.3.6.1.2.1.4.1 The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams; IP hosts do not (except those source-routed through the host). Fabric OS MIB Reference 53-1001156-01...
Page 79 ipDefaultTTL 1.3.6.1.2.1.4.2 ipDefaultTTL 1.3.6.1.2.1.4.2 The default value inserted into the time-to-live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol. Fabric OS MIB Reference 53-1001156-01...
Page 80 ipInReceives 1.3.6.1.2.1.4.3 ipInReceives 1.3.6.1.2.1.4.3 The total number of input datagrams received from interfaces, including those received in error. Fabric OS MIB Reference 53-1001156-01...
Page 81 ipInHdrErrors 1.3.6.1.2.1.4.4 ipInHdrErrors 1.3.6.1.2.1.4.4 The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, and so on. Fabric OS MIB Reference 53-1001156-01...
Page 82 ipInAddrErrors 1.3.6.1.2.1.4.5 ipInAddrErrors 1.3.6.1.2.1.4.5 The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (for example, 0.0.0.0) and addresses of unsupported classes (for example, Class E). For entities that are not IP gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
Page 83 ipForwDatagrams 1.3.6.1.2.1.4.6 ipForwDatagrams 1.3.6.1.2.1.4.6 The number of input datagrams for which this entity was not final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities that do not act as IP gateways, this counter includes only those packets that were source-routed through this entity, and the Source-Route option processing was successful.
Page 84 ipInUnknownProtos 1.3.6.1.2.1.4.7 ipInUnknownProtos 1.3.6.1.2.1.4.7 The number of locally addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. Fabric OS MIB Reference 53-1001156-01...
Page 85 ipInDiscards 1.3.6.1.2.1.4.8 ipInDiscards 1.3.6.1.2.1.4.8 The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (for example, for lack of buffer space). This counter does not include any datagrams discarded while awaiting reassembly. Fabric OS MIB Reference 53-1001156-01...
Page 86 ipInDelivers 1.3.6.1.2.1.4.9 ipInDelivers 1.3.6.1.2.1.4.9 The total number of input datagrams successfully delivered to IP user protocols (including ICMP). Fabric OS MIB Reference 53-1001156-01...
Page 87 ipOutRequests 1.3.6.1.2.1.4.10 ipOutRequests 1.3.6.1.2.1.4.10 The total number of IP datagrams that local IP user protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams. Fabric OS MIB Reference 53-1001156-01...
Page 88 ipOutDiscards 1.3.6.1.2.1.4.11 ipOutDiscards 1.3.6.1.2.1.4.11 The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (for example, for lack of buffer space). NOTE This counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
Page 89 ipOutNoRoutes 1.3.6.1.2.1.4.12 ipOutNoRoutes 1.3.6.1.2.1.4.12 The number of IP datagrams discarded because no route could be found to transmit them to their destination. NOTE This counter includes any packets counted in ipForwDatagrams that meet this “no-route” criterion. Note that this includes any datagrams that a host cannot route because all of its default gateways are down.
Page 90 ipReasmTimeout 1.3.6.1.2.1.4.13 ipReasmTimeout 1.3.6.1.2.1.4.13 The maximum number of seconds that received fragments are held while they are awaiting reassembly at this entity. Fabric OS MIB Reference 53-1001156-01...
Page 91 ipReasmReqds 1.3.6.1.2.1.4.14 ipReasmReqds 1.3.6.1.2.1.4.14 The number of IP fragments received that needed to be reassembled at this entity. Fabric OS MIB Reference 53-1001156-01...
Page 92 ipReasmOKs 1.3.6.1.2.1.4.15 ipReasmOKs 1.3.6.1.2.1.4.15 The number of IP datagrams successfully reassembled. Fabric OS MIB Reference 53-1001156-01...
Page 93 ipReasmFails 1.3.6.1.2.1.4.16 ipReasmFails 1.3.6.1.2.1.4.16 The number of failures detected by the IP reassembly algorithm (for whatever reason: timed out, errors, and so on). NOTE This is not necessarily a count of discarded IP fragments, because some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
Page 94 ipFragOKs 1.3.6.1.2.1.4.17 ipFragOKs 1.3.6.1.2.1.4.17 The number of IP datagrams that have been successfully fragmented at this entity. Fabric OS MIB Reference 53-1001156-01...
Page 95 ipFragFails 1.3.6.1.2.1.4.18 ipFragFails 1.3.6.1.2.1.4.18 The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be (for example, because their Don't Fragment flag was set). Fabric OS MIB Reference 53-1001156-01...
Page 96 ipFragCreates 1.3.6.1.2.1.4.19 ipFragCreates 1.3.6.1.2.1.4.19 The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. Fabric OS MIB Reference 53-1001156-01...
Page 97 ipAddrTable 1.3.6.1.2.1.4.20 ipAddrTable 1.3.6.1.2.1.4.20 The table of addressing information relevant to this entity's IP addresses. Fabric OS MIB Reference 53-1001156-01...
Page 98 ipAddrEntry 1.3.6.1.2.1.4.20.1 ipAddrEntry 1.3.6.1.2.1.4.20.1 The addressing information for one of this entity's IP addresses. Index ipAdEntAddr Fabric OS MIB Reference 53-1001156-01...
Page 99 ipAdEntAddr 1.3.6.1.2.1.4.20.1.1 ipAdEntAddr 1.3.6.1.2.1.4.20.1.1 The IP address to which this entry's addressing information pertains. Fabric OS MIB Reference 53-1001156-01...
Page 100 ipAdEntIfIndex 1.3.6.1.2.1.4.20.1.2 ipAdEntIfIndex 1.3.6.1.2.1.4.20.1.2 The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. Fabric OS MIB Reference 53-1001156-01...
Page 101 ipAdEntNetMask 1.3.6.1.2.1.4.20.1.3 ipAdEntNetMask 1.3.6.1.2.1.4.20.1.3 The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0. Fabric OS MIB Reference 53-1001156-01...
Page 102 ipAdEntBcastAddr 1.3.6.1.2.1.4.20.1.4 ipAdEntBcastAddr 1.3.6.1.2.1.4.20.1.4 The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
Page 103 ipAdEntReasmMaxSize 1.3.6.1.2.1.4.20.1.5 ipAdEntReasmMaxSize 1.3.6.1.2.1.4.20.1.5 The size of the largest IP datagram that this entity can reassemble from incoming IP fragmented datagrams received on this interface. Fabric OS MIB Reference 53-1001156-01...
Page 104 ipRouteTable 1.3.6.1.2.1.4.21 ipRouteTable 1.3.6.1.2.1.4.21 The IP routing table contains an entry for each route currently known to this entity. Fabric OS MIB Reference 53-1001156-01...
Page 105 ipRouteEntry 1.3.6.1.2.1.4.21.1 ipRouteEntry 1.3.6.1.2.1.4.21.1 A route to a particular destination. Index ipRouteDest Fabric OS MIB Reference 53-1001156-01...
Page 106 ipRouteDest 1.3.6.1.2.1.4.21.1.1 ipRouteDest 1.3.6.1.2.1.4.21.1.1 The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table-access mechanisms defined by the network management protocol in use.
Page 107 ipRouteIfIndex 1.3.6.1.2.1.4.21.1.2 ipRouteIfIndex 1.3.6.1.2.1.4.21.1.2 The index value that uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex.
Page 108 ipRouteMetric1 1.3.6.1.2.1.4.21.1.3 ipRouteMetric1 1.3.6.1.2.1.4.21.1.3 The primary routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1. Fabric OS MIB Reference 53-1001156-01...
Page 109 ipRouteMetric2 1.3.6.1.2.1.4.21.1.4 ipRouteMetric2 1.3.6.1.2.1.4.21.1.4 An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1. Fabric OS MIB Reference 53-1001156-01...
Page 110 ipRouteMetric3 1.3.6.1.2.1.4.21.1.5 ipRouteMetric3 1.3.6.1.2.1.4.21.1.5 An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1. Fabric OS MIB Reference 53-1001156-01...
Page 111 ipRouteMetric4 1.3.6.1.2.1.4.21.1.6 ipRouteMetric4 1.3.6.1.2.1.4.21.1.6 An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1. Fabric OS MIB Reference 53-1001156-01...
Page 112 ipRouteNextHop 1.3.6.1.2.1.4.21.1.7 ipRouteNextHop 1.3.6.1.2.1.4.21.1.7 The IP address of the next hop of this route. (In the case of a route bound to an interface that is realized through a broadcast media, the value of this field is the agent’s IP address on that interface.) Fabric OS MIB Reference 53-1001156-01...
Page 113 ipRouteType 1.3.6.1.2.1.4.21.1.8 ipRouteType 1.3.6.1.2.1.4.21.1.8 The type of route. Setting this object to 2 (invalid) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table.
Page 114 ipRouteProto 1.3.6.1.2.1.4.21.1.9 ipRouteProto 1.3.6.1.2.1.4.21.1.9 The routing mechanism by which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. Fabric OS MIB Reference 53-1001156-01...
Page 115 ipRouteAge 1.3.6.1.2.1.4.21.1.10 ipRouteAge 1.3.6.1.2.1.4.21.1.10 The number of seconds since this route was last updated or otherwise determined to be correct. Older semantics cannot be implied except through knowledge of the routing protocol by which the route was learned. Fabric OS MIB Reference 53-1001156-01...
Page 116 ipRouteMask 1.3.6.1.2.1.4.21.1.11 ipRouteMask 1.3.6.1.2.1.4.21.1.11 The mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of the following: mask network...
Page 117 ipRouteMetric5 1.3.6.1.2.1.4.21.1.12 ipRouteMetric5 1.3.6.1.2.1.4.21.1.12 An alternate routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1. Fabric OS MIB Reference 53-1001156-01...
Page 118 ipRouteInfo 1.3.6.1.2.1.4.21.1.13 ipRouteInfo 1.3.6.1.2.1.4.21.1.13 A reference to MIB definitions specific to the particular routing protocol that is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the Object Identifier { 0 0 }, which is a syntactically valid object identifier;...
Page 119 ipNetToMediaTable 1.3.6.1.2.1.4.22 ipNetToMediaTable 1.3.6.1.2.1.4.22 The IP Address Translation table used for mapping from IP addresses to physical addresses. NOTE The IP address translation table contains the IP address to physical address equivalences. Some interfaces do not use translation tables for determining address equivalences. For example, DDN-X.25 has an algorithmic method;...
Page 120 ipNetToMediaEntry 1.3.6.1.2.1.4.22.1 ipNetToMediaEntry 1.3.6.1.2.1.4.22.1 Each entry contains one IP address to physical address equivalence. Index ipNetToMediaIfIndex, ipNetToMediaNetAddress Fabric OS MIB Reference 53-1001156-01...
Page 121 ipNetToMediaIfIndex 1.3.6.1.2.1.4.22.1.1 ipNetToMediaIfIndex 1.3.6.1.2.1.4.22.1.1 The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex. Fabric OS MIB Reference 53-1001156-01...
Page 122 ipNetToMediaPhysAddress 1.3.6.1.2.1.4.22.1.2 ipNetToMediaPhysAddress 1.3.6.1.2.1.4.22.1.2 The media-dependent physical address. Fabric OS MIB Reference 53-1001156-01...
Page 123 ipNetToMediaNetAddress 1.3.6.1.2.1.4.22.1.3 ipNetToMediaNetAddress 1.3.6.1.2.1.4.22.1.3 The IpAddress corresponding to the media-dependent physical address. Fabric OS MIB Reference 53-1001156-01...
Page 124 ipNetToMediaType 1.3.6.1.2.1.4.22.1.4 ipNetToMediaType 1.3.6.1.2.1.4.22.1.4 The type of mapping. Fabric OS MIB Reference 53-1001156-01...
Page 125 ipRoutingDiscards 1.3.6.1.2.1.4.23 ipRoutingDiscards 1.3.6.1.2.1.4.23 The number of routing entries discarded even though they are valid. One possible reason for discarding such an entry could be to free buffer space for other routing entries. Fabric OS MIB Reference 53-1001156-01...
Page 126: Icmp Group
ICMP Group ICMP Group Implementation of the ICMP group is mandatory for all systems. Fabric OS MIB Reference 53-1001156-01...
Page 127 icmpInMsgs 1.3.6.1.2.1.5.1 icmpInMsgs 1.3.6.1.2.1.5.1 The total number of ICMP messages that the entity received. This counter includes all ICMP messages counted by icmpInErrors. Fabric OS MIB Reference 53-1001156-01...
Page 128 icmpInErrors 1.3.6.1.2.1.5.2 icmpInErrors 1.3.6.1.2.1.5.2 The number of ICMP messages that the entity received but determined to have ICMP-specific errors (bad ICMP checksums, bad length, and so on). Fabric OS MIB Reference 53-1001156-01...
Page 129 icmpInDestUnreachs 1.3.6.1.2.1.5.3 icmpInDestUnreachs 1.3.6.1.2.1.5.3 The number of ICMP Destination Unreachable messages received. Fabric OS MIB Reference 53-1001156-01...
Page 130 icmpInTimeExcds 1.3.6.1.2.1.5.4 icmpInTimeExcds 1.3.6.1.2.1.5.4 The number of ICMP Time Exceeded messages received. Fabric OS MIB Reference 53-1001156-01...
Page 131 icmpInParmProbs 1.3.6.1.2.1.5.5 icmpInParmProbs 1.3.6.1.2.1.5.5 The number of ICMP Parameter Problem messages received. Fabric OS MIB Reference 53-1001156-01...
Page 132 icmpInSrcQuenchs 1.3.6.1.2.1.5.6 icmpInSrcQuenchs 1.3.6.1.2.1.5.6 The number of ICMP Source Quench messages received. Fabric OS MIB Reference 53-1001156-01...
Page 133 icmpInRedirects 1.3.6.1.2.1.5.7 icmpInRedirects 1.3.6.1.2.1.5.7 The number of ICMP Redirect messages received. Fabric OS MIB Reference 53-1001156-01...
Page 134 icmpInEchos 1.3.6.1.2.1.5.8 icmpInEchos 1.3.6.1.2.1.5.8 The number of ICMP Echo (request) messages received. Fabric OS MIB Reference 53-1001156-01...
Page 135 icmpInEchoReps 1.3.6.1.2.1.5.9 icmpInEchoReps 1.3.6.1.2.1.5.9 The number of ICMP Echo Reply messages received. Fabric OS MIB Reference 53-1001156-01...
Page 136 icmpInTimestamps 1.3.6.1.2.1.5.10 icmpInTimestamps 1.3.6.1.2.1.5.10 The number of ICMP Timestamp (request) messages received. Fabric OS MIB Reference 53-1001156-01...
Page 137 icmpInTimestampReps 1.3.6.1.2.1.5.11 icmpInTimestampReps 1.3.6.1.2.1.5.11 The number of ICMP Timestamp Reply messages received. Fabric OS MIB Reference 53-1001156-01...
Page 138 icmpInAddrMasks 1.3.6.1.2.1.5.12 icmpInAddrMasks 1.3.6.1.2.1.5.12 The number of ICMP Address Mask Request messages received. Fabric OS MIB Reference 53-1001156-01...
Page 139 icmpInAddrMaskReps 1.3.6.1.2.1.5.13 icmpInAddrMaskReps 1.3.6.1.2.1.5.13 The number of ICMP Address Mask Reply messages received. Fabric OS MIB Reference 53-1001156-01...
Page 140 icmpOutMsgs 1.3.6.1.2.1.5.14 icmpOutMsgs 1.3.6.1.2.1.5.14 The total number of ICMP messages that this entity attempted to send. NOTE This counter includes all those counted by icmpOutErrors. Fabric OS MIB Reference 53-1001156-01...
Page 141 icmpOutErrors 1.3.6.1.2.1.5.15 icmpOutErrors 1.3.6.1.2.1.5.15 The number of ICMP messages that this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there might be no types of error that contribute to this counter's value.
Page 142 icmpOutDestUnreachs 1.3.6.1.2.1.5.16 icmpOutDestUnreachs 1.3.6.1.2.1.5.16 The number of ICMP Destination Unreachable messages sent. Fabric OS MIB Reference 53-1001156-01...
Page 143 icmpOutTimeExcds 1.3.6.1.2.1.5.17 icmpOutTimeExcds 1.3.6.1.2.1.5.17 The number of ICMP Time Exceeded messages sent. Fabric OS MIB Reference 53-1001156-01...
Page 144 icmpOutParmProbs 1.3.6.1.2.1.5.18 icmpOutParmProbs 1.3.6.1.2.1.5.18 The number of ICMP Parameter Problem messages sent. Fabric OS MIB Reference 53-1001156-01...
Page 145 icmpOutSrcQuenchs 1.3.6.1.2.1.5.19 icmpOutSrcQuenchs 1.3.6.1.2.1.5.19 The number of ICMP Source Quench messages sent. Fabric OS MIB Reference 53-1001156-01...
Page 146 icmpOutRedirects 1.3.6.1.2.1.5.20 icmpOutRedirects 1.3.6.1.2.1.5.20 The number of ICMP Redirect messages sent. For a host, this object is always 0, since hosts do not send redirects. Fabric OS MIB Reference 53-1001156-01...
Page 147 icmpOutEchos 1.3.6.1.2.1.5.21 icmpOutEchos 1.3.6.1.2.1.5.21 The number of ICMP Echo (request) messages sent. Fabric OS MIB Reference 53-1001156-01...
Page 148 icmpOutEchoReps 1.3.6.1.2.1.5.22 icmpOutEchoReps 1.3.6.1.2.1.5.22 The number of ICMP Echo Reply messages sent. Fabric OS MIB Reference 53-1001156-01...
Page 149 icmpOutTimestamps 1.3.6.1.2.1.5.23 icmpOutTimestamps 1.3.6.1.2.1.5.23 The number of ICMP Timestamp (request) messages sent. Fabric OS MIB Reference 53-1001156-01...
Page 150 icmpOutTimestampReps 1.3.6.1.2.1.5.24 icmpOutTimestampReps 1.3.6.1.2.1.5.24 The number of ICMP Timestamp Reply messages sent. Fabric OS MIB Reference 53-1001156-01...
Page 151 icmpOutAddrMasks 1.3.6.1.2.1.5.25 icmpOutAddrMasks 1.3.6.1.2.1.5.25 The number of ICMP Address Mask Request messages sent. Fabric OS MIB Reference 53-1001156-01...
Page 152 icmpOutAddrMaskReps 1.3.6.1.2.1.5.26 icmpOutAddrMaskReps 1.3.6.1.2.1.5.26 The number of ICMP Address Mask Reply messages sent. Fabric OS MIB Reference 53-1001156-01...
Page 153: Tcp Group
TCP Group TCP Group Implementation of the TCP group is mandatory for all systems that implement the TCP. Instances of object types that represent information about a particular TCP connection are transient; they persist only as long as the connection in question. Fabric OS MIB Reference 53-1001156-01...
Page 154 tcpRtoAlgorithm 1.3.6.1.2.1.6.1 tcpRtoAlgorithm 1.3.6.1.2.1.6.1 The algorithm used to determine the time-out value used for retransmitting unacknowledged octets. Fabric OS MIB Reference 53-1001156-01...
Page 155 tcpRtoMin 1.3.6.1.2.1.6.2 tcpRtoMin 1.3.6.1.2.1.6.2 The minimum value permitted by a TCP implementation for the retransmission time-out, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission time-out. In particular, when the time-out algorithm is 3 (rsre), an object of this type has the semantics of the LBOUND quantity described in RFC 793.
Page 156 tcpRtoMax 1.3.6.1.2.1.6.3 tcpRtoMax 1.3.6.1.2.1.6.3 The maximum value permitted by a TCP implementation for the retransmission time-out, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission time-out. In particular, when the time-out algorithm is 3 (rsre), an object of this type has the semantics of the UBOUND quantity described in RFC 793.
Page 157 tcpMaxConn 1.3.6.1.2.1.6.4 tcpMaxConn 1.3.6.1.2.1.6.4 The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1. Fabric OS MIB Reference 53-1001156-01...
Page 158 tcpActiveOpens 1.3.6.1.2.1.6.5 tcpActiveOpens 1.3.6.1.2.1.6.5 The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state. Fabric OS MIB Reference 53-1001156-01...
Page 159 tcpPassiveOpens 1.3.6.1.2.1.6.6 tcpPassiveOpens 1.3.6.1.2.1.6.6 The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state. Fabric OS MIB Reference 53-1001156-01...
Page 160 tcpAttemptFails 1.3.6.1.2.1.6.7 tcpAttemptFails 1.3.6.1.2.1.6.7 The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state. Fabric OS MIB Reference 53-1001156-01...
Page 161 tcpEstabResets 1.3.6.1.2.1.6.8 tcpEstabResets 1.3.6.1.2.1.6.8 The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state. Fabric OS MIB Reference 53-1001156-01...
Page 162 tcpCurrEstab 1.3.6.1.2.1.6.9 tcpCurrEstab 1.3.6.1.2.1.6.9 The number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT. Fabric OS MIB Reference 53-1001156-01...
Page 163 tcpInSegs 1.3.6.1.2.1.6.10 tcpInSegs 1.3.6.1.2.1.6.10 The total number of segments received, including those received in error. This count includes segments received on currently established connections. Fabric OS MIB Reference 53-1001156-01...
Page 164 tcpOutSegs 1.3.6.1.2.1.6.11 tcpOutSegs 1.3.6.1.2.1.6.11 The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets. Fabric OS MIB Reference 53-1001156-01...
Page 165 tcpRetransSegs 1.3.6.1.2.1.6.12 tcpRetransSegs 1.3.6.1.2.1.6.12 The total number of segments retransmitted; that is, the number of TCP segments transmitted containing one or more previously transmitted octets. Fabric OS MIB Reference 53-1001156-01...
Page 166: Tcp Connection Table
TCP Connection Table TCP Connection Table The TCP connection table contains information about this entity's existing TCP connections. Fabric OS MIB Reference 53-1001156-01...
Page 167 tcpConnTable 1.3.6.1.2.1.6.13 tcpConnTable 1.3.6.1.2.1.6.13 A table containing TCP connection-specific information. Fabric OS MIB Reference 53-1001156-01...
Page 168 tcpConnEntry 1.3.6.1.2.1.6.13.1 tcpConnEntry 1.3.6.1.2.1.6.13.1 Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state. Index tcpConnLocalAddress, tcpConnLocalPort, tcpConnRemAddress, tcpConnRemPort Fabric OS MIB Reference 53-1001156-01...
Page 169 tcpConnState 1.3.6.1.2.1.6.13.1.1 tcpConnState 1.3.6.1.2.1.6.13.1.1 The state of this TCP connection. The only value that might be set by a management station is deleteTCB (12). Accordingly, it is appropriate for an agent to return a badValue response if a management station attempts to set this object to any other value.
Page 170 tcpConnLocalAddress 1.3.6.1.2.1.6.13.1.2 tcpConnLocalAddress 1.3.6.1.2.1.6.13.1.2 The local IP address for this TCP connection. In the case of a connection in the listen state that is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
Page 171 tcpConnLocalPort 1.3.6.1.2.1.6.13.1.3 tcpConnLocalPort 1.3.6.1.2.1.6.13.1.3 The local port number for this TCP connection. Fabric OS MIB Reference 53-1001156-01...
Page 172 tcpConnRemAddress 1.3.6.1.2.1.6.13.1.4 tcpConnRemAddress 1.3.6.1.2.1.6.13.1.4 The remote IP address for this TCP connection. Fabric OS MIB Reference 53-1001156-01...
Page 173 tcpConnRemPort 1.3.6.1.2.1.6.13.1.5 tcpConnRemPort 1.3.6.1.2.1.6.13.1.5 The remote port number for this TCP connection. Fabric OS MIB Reference 53-1001156-01...
Page 174 tcpInErrs 1.3.6.1.2.1.6.14 tcpInErrs 1.3.6.1.2.1.6.14 The total number of segments received in error (for example, bad TCP checksums). Fabric OS MIB Reference 53-1001156-01...
Page 175 tcpOutRsts 1.3.6.1.2.1.6.15 tcpOutRsts 1.3.6.1.2.1.6.15 The number of TCP segments sent containing the RST flag. Fabric OS MIB Reference 53-1001156-01...
Page 176: Udp Group
UDP Group UDP Group Implementation of the UDP group is mandatory for all systems that implement the UDP. Fabric OS MIB Reference 53-1001156-01...
Page 177 udpInDatagrams 1.3.6.1.2.1.7.1 udpInDatagrams 1.3.6.1.2.1.7.1 The total number of UDP datagrams delivered to UDP users. Fabric OS MIB Reference 53-1001156-01...
Page 178 udpNoPorts 1.3.6.1.2.1.7.2 udpNoPorts 1.3.6.1.2.1.7.2 The total number of received UDP datagrams for which there was no application at the destination port. Fabric OS MIB Reference 53-1001156-01...
Page 179 udpInErrors 1.3.6.1.2.1.7.3 udpInErrors 1.3.6.1.2.1.7.3 The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. Fabric OS MIB Reference 53-1001156-01...
Page 180 udpOutDatagrams 1.3.6.1.2.1.7.4 udpOutDatagrams 1.3.6.1.2.1.7.4 The total number of UDP datagrams sent from this entity. Fabric OS MIB Reference 53-1001156-01...
Page 181 udpTable 1.3.6.1.2.1.7.5 udpTable 1.3.6.1.2.1.7.5 The UDP listener table contains information about this entity’s UDP end-points on which a local application is currently accepting datagrams. Fabric OS MIB Reference 53-1001156-01...
Page 182 udpEntry 1.3.6.1.2.1.7.5.1 udpEntry 1.3.6.1.2.1.7.5.1 Information about a particular current UDP listener. Index udpLocalAddress, udpLocalPort Fabric OS MIB Reference 53-1001156-01...
Page 183 udpLocalAddress 1.3.6.1.2.1.7.5.1.1 udpLocalAddress 1.3.6.1.2.1.7.5.1.1 The local IP address for this UDP listener. In the case of a UDP listener that is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used. Fabric OS MIB Reference 53-1001156-01...
Page 184: Egp Group
udpLocalPort 1.3.6.1.2.1.7.5.1.2 udpLocalPort 1.3.6.1.2.1.7.5.1.2 The local port number for this UDP listener. EGP Group Brocade does not support the EGP Group. This section is not applicable. Refer to the RFC1213 for complete information regarding the EGP Group. Transmission Group Brocade does not support the Transmission Group. This section is not applicable. Refer to the RFC1213 for complete information regarding the Transmission Group.
Page 185 snmpInPkts 1.3.6.1.2.1.11.1 snmpInPkts 1.3.6.1.2.1.11.1 The total number of messages delivered to the SNMP entity from the transport service. Fabric OS MIB Reference 53-1001156-01...
Page 186 snmpOutPkts 1.3.6.1.2.1.11.2 snmpOutPkts 1.3.6.1.2.1.11.2 The total number of SNMP messages that were passed from the SNMP protocol entity to the transport service. Fabric OS MIB Reference 53-1001156-01...
Page 187 snmpInBadVersions 1.3.6.1.2.1.11.3 snmpInBadVersions 1.3.6.1.2.1.11.3 The total number of SNMP messages that were delivered to the SNMP protocol entity and were for an unsupported SNMP version. Fabric OS MIB Reference 53-1001156-01...
Page 188 snmpInBadCommunityNames 1.3.6.1.2.1.11.4 snmpInBadCommunityNames 1.3.6.1.2.1.11.4 The total number of SNMP messages delivered to the SNMP protocol entity that used a SNMP community name not known to said entity. Fabric OS MIB Reference 53-1001156-01...
Page 189 snmpInBadCommunityUses 1.3.6.1.2.1.11.5 snmpInBadCommunityUses 1.3.6.1.2.1.11.5 The total number of SNMP messages delivered to the SNMP protocol entity that represented an SNMP operation that was not allowed by the SNMP community named in the message. Fabric OS MIB Reference 53-1001156-01...
Page 190 snmpInASNParseErrs 1.3.6.1.2.1.11.6 snmpInASNParseErrs 1.3.6.1.2.1.11.6 The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP messages. NOTE 1.3.6.1.2.1.11.7 is not supported. Fabric OS MIB Reference 53-1001156-01...
Page 191 snmpInTooBigs 1.3.6.1.2.1.11.8 snmpInTooBigs 1.3.6.1.2.1.11.8 The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of the error-status field is “tooBig.” Fabric OS MIB Reference 53-1001156-01...
Page 192 snmpInNoSuchNames 1.3.6.1.2.1.11.9 snmpInNoSuchNames 1.3.6.1.2.1.11.9 The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of the error-status field is “noSuchName.” Fabric OS MIB Reference 53-1001156-01...
Page 193 snmpInBadValues 1.3.6.1.2.1.11.10 snmpInBadValues 1.3.6.1.2.1.11.10 The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of the error-status field is “badValue.” Fabric OS MIB Reference 53-1001156-01...
Page 194 snmpInReadOnlys 1.3.6.1.2.1.11.11 snmpInReadOnlys 1.3.6.1.2.1.11.11 The total number valid SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of the error-status field is “readOnly.” It is a protocol error to generate an SNMP PDU that contains the value “readOnly” in the error-status field;...
Page 195 snmpInGenErrs 1.3.6.1.2.1.11.12 snmpInGenErrs 1.3.6.1.2.1.11.12 The total number of SNMP PDUs that were delivered to the SNMP protocol entity and for which the value of the error-status field is “genErr.” Fabric OS MIB Reference 53-1001156-01...
Page 196 snmpInTotalReqVars 1.3.6.1.2.1.11.13 snmpInTotalReqVars 1.3.6.1.2.1.11.13 The total number of MIB objects that have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs. Fabric OS MIB Reference 53-1001156-01...
Page 197 snmpInTotalSetVars 1.3.6.1.2.1.11.14 snmpInTotalSetVars 1.3.6.1.2.1.11.14 The total number of MIB objects that have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs. Fabric OS MIB Reference 53-1001156-01...
Page 198 snmpInGetRequests 1.3.6.1.2.1.11.15 snmpInGetRequests 1.3.6.1.2.1.11.15 Status Mandatory The total number of SNMP Get-Request PDUs that have been accepted and processed by the SNMP protocol entity. Fabric OS MIB Reference 53-1001156-01...
Page 199 snmpInGetNexts 1.3.6.1.2.1.11.16 snmpInGetNexts 1.3.6.1.2.1.11.16 The total number of SNMP Get-Next PDUs that have been accepted and processed by the SNMP protocol entity. Fabric OS MIB Reference 53-1001156-01...
Page 200 snmpInSetRequests 1.3.6.1.2.1.11.17 snmpInSetRequests 1.3.6.1.2.1.11.17 The total number of SNMP Set-Request PDUs that have been accepted and processed by the SNMP protocol entity. Fabric OS MIB Reference 53-1001156-01...
Page 201 snmpInGetResponses 1.3.6.1.2.1.11.18 snmpInGetResponses 1.3.6.1.2.1.11.18 The total number of SNMP Get-Response PDUs that have been accepted and processed by the SNMP protocol entity. Fabric OS MIB Reference 53-1001156-01...
Page 202 snmpInTraps 1.3.6.1.2.1.11.19 snmpInTraps 1.3.6.1.2.1.11.19 The total number of SNMP Trap PDUs that have been accepted and processed by the SNMP protocol entity. Fabric OS MIB Reference 53-1001156-01...
Page 203 snmpOutTooBigs 1.3.6.1.2.1.11.20 snmpOutTooBigs 1.3.6.1.2.1.11.20 The total number of SNMP PDUs that were generated by the SNMP protocol entity and for which the value of the error-status field is too large. Fabric OS MIB Reference 53-1001156-01...
Page 204 snmpOutNoSuchNames 1.3.6.1.2.1.11.21 snmpOutNoSuchNames 1.3.6.1.2.1.11.21 The total number of SNMP PDUs that were generated by the SNMP protocol entity and for which the value of the error-status field is “noSuchName.” Fabric OS MIB Reference 53-1001156-01...
Page 205 snmpOutBadValues 1.3.6.1.2.1.11.22 snmpOutBadValues 1.3.6.1.2.1.11.22 The total number of SNMP PDUs that were generated by the SNMP protocol entity and for which the value of the error-status field is “badValue.” NOTE 1.3.6.1.2.1.11.23 is not supported. Fabric OS MIB Reference 53-1001156-01...
Page 206 snmpOutGenErrs 1.3.6.1.2.1.11.24 snmpOutGenErrs 1.3.6.1.2.1.11.24 The total number of SNMP PDUs that were generated by the SNMP protocol entity and for which the value of the error-status field is “genErr.” Fabric OS MIB Reference 53-1001156-01...
Page 207 snmpOutGetRequests 1.3.6.1.2.1.11.25 snmpOutGetRequests 1.3.6.1.2.1.11.25 The total number of SNMP Get-Request PDUs that have been generated by the SNMP protocol entity. Fabric OS MIB Reference 53-1001156-01...
Page 208 snmpOutGetNexts 1.3.6.1.2.1.11.26 snmpOutGetNexts 1.3.6.1.2.1.11.26 The total number of SNMP Get-Next PDUs that have been generated by the SNMP protocol entity. Fabric OS MIB Reference 53-1001156-01...
Page 209 snmpOutSetRequests 1.3.6.1.2.1.11.27 snmpOutSetRequests 1.3.6.1.2.1.11.27 The total number of SNMP Set-Request PDUs that have been generated by the SNMP protocol entity. Fabric OS MIB Reference 53-1001156-01...
Page 210 snmpOutGetResponses 1.3.6.1.2.1.11.28 snmpOutGetResponses 1.3.6.1.2.1.11.28 The total number of SNMP Get-Response PDUs that have been generated by the SNMP protocol entity. Fabric OS MIB Reference 53-1001156-01...
Page 211 snmpOutTraps 1.3.6.1.2.1.11.29 snmpOutTraps 1.3.6.1.2.1.11.29 The total number of SNMP Trap PDUs that have been generated by the SNMP protocol entity. Fabric OS MIB Reference 53-1001156-01...
Page 212: Ifmib Group
snmpEnableAuthenTraps 1.3.6.1.2.1.11.30 snmpEnableAuthenTraps 1.3.6.1.2.1.11.30 Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps might be disabled. Values Possible values are: •...
Page 213 ifXTable 1.3.6.1.2.1.31.1.1 ifXTable 1.3.6.1.2.1.31.1.1 A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table. Fabric OS MIB Reference 53-1001156-01...
Page 214 ifXentry 1.3.6.1.2.1.31.1.1.1 ifXentry 1.3.6.1.2.1.31.1.1.1 An entry in the ifXtable containing additional management information applicable to a particular interface. Fabric OS MIB Reference 53-1001156-01...
Page 215 ifName 1.3.6.1.2.1.31.1.1.1.1 ifName 1.3.6.1.2.1.31.1.1.1.1 The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the devices console.
Page 216 ifInMulticastPkts 1.3.6.1.2.1.31.1.1.1.2 ifInMulticastPkts 1.3.6.1.2.1.31.1.1.1.2 The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Page 217 ifInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.3 ifInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.3 The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Page 218 ifOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.4 ifOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.4 The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime Not supported.
Page 219 ifOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.5 ifOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.5 The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a Broadcast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime Not supported.
Page 220 ifHCInOctets 1.3.6.1.2.1.31.1.1.1.6 ifHCInOctets 1.3.6.1.2.1.31.1.1.1.6 The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime Fabric OS MIB Reference 53-1001156-01...
Page 221 ifHCInUcastPkts 1.3.6.1.2.1.31.1.1.1.7 ifHCInUcastPkts 1.3.6.1.2.1.31.1.1.1.7 The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Page 222 ifHCInMulticastPkts 1.3.6.1.2.1.31.1.1.1.8 ifHCInMulticastPkts 1.3.6.1.2.1.31.1.1.1.8 The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifInMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Page 223 ifHCInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.9 ifHCInBroadcastPkts 1.3.6.1.2.1.31.1.1.1.9 The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime Not supported.
Page 224 ifHCOutOctets 1.3.6.1.2.1.31.1.1.1.10 ifHCOutOctets 1.3.6.1.2.1.31.1.1.1.10 The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Page 225 ifHCOutUcastPkts 1.3.6.1.2.1.31.1.1.1.11 ifHCOutUcastPkts 1.3.6.1.2.1.31.1.1.1.11 The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Page 226 ifHCOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.12 ifHCOutMulticastPkts 1.3.6.1.2.1.31.1.1.1.12 The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts.
Page 227 ifHCOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.13 ifHCOutBroadcastPkts 1.3.6.1.2.1.31.1.1.1.13 The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Page 228 ifLinkUpDownTrapEnable 1.3.6.1.2.1.31.1.1.1.14 ifLinkUpDownTrapEnable 1.3.6.1.2.1.31.1.1.1.14 Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled (1) for interfaces which do not operate on any other interface (as defined in the ifStackTable), and disabled (2) otherwise. Fabric OS MIB Reference 53-1001156-01...
Page 229 ifHigfSpeed 1.3.6.1.2.1.31.1.1.1.15 ifHigfSpeed 1.3.6.1.2.1.31.1.1.1.15 An estimate of the current operational speed of the interface in millions of bits per second. A unit of 1000 equals 1,000,000 bps. For 1 Gbps, the value is 1000, for 2 Gbps, the value 2000, etc. Fabric OS MIB Reference 53-1001156-01...
Page 230 ifPromiscuousMode 1.3.6.1.2.1.31.1.1.1.16 ifPromiscuousMode 1.3.6.1.2.1.31.1.1.1.16 This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the media. The value true(1) is only legal on certain types of media. If legal, setting this object to a value of true(1) may require the interface to be reset before becoming effective.
Page 231 ifConnectorPresent 1.3.6.1.2.1.31.1.1.1.17 ifConnectorPresent 1.3.6.1.2.1.31.1.1.1.17 Set to true when media is connected, otherwise false. For virtual FC ports, it is always false. Fabric OS MIB Reference 53-1001156-01...
Page 232 ifAlias 1.3.6.1.2.1.31.1.1.1.18 ifAlias 1.3.6.1.2.1.31.1.1.1.18 This object is an alias name for the interface as specified by a network manager, and provides a non-volatile handle for the interface. On the first instantiation of an interface, the value of ifAlias associated with that interface is the zero-length string. As and when a value is written into an instance of ifAlias through a network management set operation, then the agent must retain the supplied value in the ifAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re-initializations/reboots of the network...
Page 233 ifCounterDiscontinuityTime 1.3.6.1.2.1.31.1.1.1.17 ifCounterDiscontinuityTime 1.3.6.1.2.1.31.1.1.1.17 The value of sysUpTime on the most recent occasion at which any one or more of this interfaces counters suffered a discontinuity. The relevant counters are the specific instances associated with this interface of any Counter32 or Counter64 object contained in the iftable or ifXTable. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
Page 234 ifCounterDiscontinuityTime 1.3.6.1.2.1.31.1.1.1.17 Fabric OS MIB Reference 53-1001156-01...
Page 235: Fe Mib Overview
Chapter FE MIB Objects This chapter provides descriptions and other information specific to FE MIB object types and includes the following information: • FE MIB Overview ..........219 •...
Page 236 FIBRE-CHANNEL-FE-MIB (MIB-II branch) NOTE Brocade does not support the settable “Write” function for any of the Fibre Channel FE MIB objects except fcFxPortPhyAdminStatus. The object types in FIBRE-CHANNEL-FE-MIB are organized into the following groupings: • Configuration • Operational • Error •...
Page 237: Fibre-Channel-Fe-Mib Organization
FIBRE-CHANNEL-FE-MIB Organization FIBRE-CHANNEL-FE-MIB Organization Figures through depict the organization and structure of FIBRE-CHANNEL-FE-MIB. - iso - org - dod - internet - mgmt - mib-2 - fcFeMIB - fcFeMIBObjects - fcFeConfig - fcFeStatus - fcFeError - fcFeAccounting - fcFeCapabilities - fcFeMIBConformance - fcFeMIBCompliances - fcFeMIBGroups FIGURE 17...
Page 238 FIBRE-CHANNEL-FE-MIB Organization FIGURE 18 fcFeConfig Hierarchy - fcFeStatus fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 fcFxPortOperMode 1.3.6.1.2.1.75.1.2.1.1.3 fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4 fcFxPortPhysTable 1.3.6.1.2.1.75.1.2.2 fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1 fcFxPortPhysOperStatus 1.3.6.1.2.1.75.1.2.2.1.2 fcFxPortPhysLastChange 1.3.6.1.2.1.75.1.2.2.1.3 fcFxPortPhysRttov 1.3.6.1.2.1.75.1.2.2.1.4 fcFxloginTable 1.3.6.1.2.1.75.1.2.3 fcFxloginEntry 1.3.6.1.2.1.75.1.2.3.1 fcFxPortNxLoginIndex 1.3.6.1.2.1.75.1.2.3.1.1 fcFxPortFcphVersionAgreed 1.3.6.1.2.1.75.1.2.3.1.2 fcFxPortNxPortBbCredit 1.3.6.1.2.1.75.1.2.3.1.3 fcFxPortNxPortRxDataFieldSize 1.3.6.1.2.1.75.1.2.3.1.4 fcFxPortCosSuppAgreed 1.3.6.1.2.1.75.1.2.3.1.5...
Page 239 FIBRE-CHANNEL-FE-MIB Organization - fcFeAccounting fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.1 fcFxPortC1AccountingEntry 1.3.6.1.2.1.75.1.4.1.1 fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1 fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 fcFxPortC1OutOctets 1.3.6.1.2.1.75.1.4.1.1.4 fcFxPortC1Discards 1.3.6.1.2.1.75.1.4.1.1.5 fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6 fcFxPortC1FrjtFrames 1.3.6.1.2.1.75.1.4.1.1.7 fcFxPortC1InConnections 1.3.6.1.2.1.75.1.4.1.1.8 fcFxPortC1OutConnections 1.3.6.1.2.1.75.1.4.1.1.9 fcFxPortC1ConnTime 1.3.6.1.2.1.75.1.4.1.1.10 fcFxPortC2AccountingTable 1.3.6.1.2.1.75.1.4.2 fcFxPortC2AccountingEntry 1.3.6.1.2.1.75.1.4.2.1 fcFxPortC2InFrames 1.3.6.1.2.1.75.1.4.2.1.1 fcFxPortC2OutFrames 1.3.6.1.2.1.75.1.4.2.1.2 fcFxPortC2InOctets 1.3.6.1.2.1.75.1.4.2.1.3 fcFxPortC2OutOctets 1.3.6.1.2.1.75.1.4.2.1.4 fcFxPortC2Discards 1.3.6.1.2.1.75.1.4.2.1.5 fcFxPortC2FbsyFrames 1.3.6.1.2.1.75.1.4.2.1.6 fcFxPortC2FrjtFrames 1.3.6.1.2.1.75.1.4.2.1.7...
Page 240: Definitions For Fibre-Channel-Fe-Mib
Definitions for FIBRE-CHANNEL-FE-MIB Definitions for FIBRE-CHANNEL-FE-MIB Table 7 lists the definitions for fcFeMIB. TABLE 7 FIBRE-CHANNEL-FE-MIB Definitions Type Definition Value Description Display string Octet string of size 0 to 255 Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. Milliseconds Integer from 0 to 2147383647 Represents time unit value in milliseconds.
Page 241 Definitions for FIBRE-CHANNEL-FE-MIB TABLE 7 FIBRE-CHANNEL-FE-MIB Definitions (Continued) Type Definition Value Description Fc0BaudRate Integer according to FC-0 baud 1 (other) None of below rates 2 (one-eighth) 155 Mbaud (12.5 MB/s) 4 (quarter) 266 Mbaud (25.0 MB/s) 8 (half) 532 Mbaud (50.0 MB/s) 16 (full) 1 Gbaud (100 MB/s) 32 (double) 2 Gbaud (200 MB/s) 64 (quadruple) 4 Gbaud (400 MB/s)
Page 242: Fcfeconfig Group
fcFeConfig Group TABLE 7 FIBRE-CHANNEL-FE-MIB Definitions (Continued) Type Definition Value Description FcFeFxPortCapacity Integer from 1 to 384 Maximum number of Fx_Ports within a module. For the Brocade 3250, this value is 8. For the Brocade 4012, this value is 12. For the Brocade 200E and 3850, this value is 16.
Page 243 fcFeFabricName 1.3.6.1.2.1.75.1.1.1 fcFeFabricName 1.3.6.1.2.1.75.1.1.1 The Name_Identifier of the Fabric to which this Fabric Element belongs. Returns Displays the WWN of the primary switch in the fabric. Fabric OS MIB Reference 53-1001156-01...
Page 244 fcFeElementName 1.3.6.1.2.1.75.1.1.2 fcFeElementName 1.3.6.1.2.1.75.1.1.2 The Name_Identifier of the fabric element. Returns Displays the WWN of the switch. Fabric OS MIB Reference 53-1001156-01...
Page 245 fcFeModuleCapacity 1.3.6.1.2.1.75.1.1.3 fcFeModuleCapacity 1.3.6.1.2.1.75.1.1.3 The maximum number of modules in the fabric element, regardless of their current state. Value The valid value for all Brocade switches is 1. Fabric OS MIB Reference 53-1001156-01...
Page 246 fcFeModuleTable 1.3.6.1.2.1.75.1.1.4 fcFeModuleTable 1.3.6.1.2.1.75.1.1.4 A table that contains information about the modules, one entry for each module in the fabric element. Fabric OS MIB Reference 53-1001156-01...
Page 247 fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.1 fcFeModuleEntry 1.3.6.1.2.1.75.1.1.4.1 An entry containing the configuration parameters of a module. Index 1: fcFeModuleIndex Fabric OS MIB Reference 53-1001156-01...
Page 248 fcFeModuleIndex 1.3.6.1.2.1.75.1.1.4.1.1 fcFeModuleIndex 1.3.6.1.2.1.75.1.1.4.1.1 Identifies the module within the fabric element for which this entry contains information. This value is never greater than fcFeModuleCapacity. This entry never shows any value as it is shown as non accessible in the browser. Fabric OS MIB Reference 53-1001156-01...
Page 249 fcFeModuleDescr 1.3.6.1.2.1.75.1.1.4.1.2 fcFeModuleDescr 1.3.6.1.2.1.75.1.1.4.1.2 A textual description of the module. This value should include the full name and version identification of the module. It should contain printable ASCII characters. Refer to “sysDescr 1.3.6.1.2.1.1.1” on page 22. Fabric OS MIB Reference 53-1001156-01...
Page 250 fcFeModuleObjectID 1.3.6.1.2.1.75.1.1.4.1.3 fcFeModuleObjectID 1.3.6.1.2.1.75.1.1.4.1.3 The vendor’s authoritative identification of the module. This value might be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straightforward and unambiguous means for determining what kind of module is being managed. For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor “Neufe Inc.” was assigned the subtree 1.3.6.1.4.1.99649 and had assigned the identifier 1.3.6.1.4.1.99649.3.9 to its “FeFiFo-16 PlugInCard.”...
Page 251 fcFeModuleOperStatus 1.3.6.1.2.1.75.1.1.4.1.4 fcFeModuleOperStatus 1.3.6.1.2.1.75.1.1.4.1.4 Indicates the operational status of the module. Values 1 - online, module functioning properly 2 - offline, module not available 3 - testing, module in test mode 4 - faulty, module is defective Fabric OS MIB Reference 53-1001156-01...
Page 252 fcFeModuleLastChange 1.3.6.1.2.1.75.1.1.4.1.5 fcFeModuleLastChange 1.3.6.1.2.1.75.1.1.4.1.5 Contains the value of sysUpTime when the module entered its current operational status. A value of 0 indicates that the operational status of the module has not changed since the agent last restarted. Fabric OS MIB Reference 53-1001156-01...
Page 253 fcFeModuleFxPortCapacity 1.3.6.1.2.1.75.1.1.4.1.6 fcFeModuleFxPortCapacity 1.3.6.1.2.1.75.1.1.4.1.6 The number of Fx_Ports that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity, inclusive. However, the numbers are not required to be contiguous. Values Valid values are: Brocade 3200, 3250...
Page 254 fcFeModuleName 1.3.6.1.2.1.75.1.1.4.1.7 fcFeModuleName 1.3.6.1.2.1.75.1.1.4.1.7 The Name_Identifier of the module. Return Displays the WWN of the switch. Fabric OS MIB Reference 53-1001156-01...
Page 255 fcFxPortTable 1.3.6.1.2.1.75.1.1.5 fcFxPortTable 1.3.6.1.2.1.75.1.1.5 A table that contains configuration and service parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element. Fabric OS MIB Reference 53-1001156-01...
Page 256 fcFxPortEntry 1.3.6.1.2.1.75.1.1.5.1 fcFxPortEntry 1.3.6.1.2.1.75.1.1.5.1 An entry containing the configuration and service parameters of an Fx_Port. Index 1: fcFeModuleIndex 2: fcFxPortIndex Fabric OS MIB Reference 53-1001156-01...
Page 257 fcFxPortIndex 1.3.6.1.2.1.75.1.1.5.1.1 fcFxPortIndex 1.3.6.1.2.1.75.1.1.5.1.1 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized. Fabric OS MIB Reference 53-1001156-01...
Page 258 fcFxPortName 1.3.6.1.2.1.75.1.1.5.1.2 fcFxPortName 1.3.6.1.2.1.75.1.1.5.1.2 The World Wide Name of this Fx_Port. Each Fx_Port has a unique port World Wide Name within the fabric. Return Displays the WWN of the port. Fabric OS MIB Reference 53-1001156-01...
Page 259 fcFxPortFcphVersionHigh 1.3.6.1.2.1.75.1.1.5.1.3 fcFxPortFcphVersionHigh 1.3.6.1.2.1.75.1.1.5.1.3 The highest or most recent version of FC-PH that the Fx_Port is configured to support. This value is always 32. Fabric OS MIB Reference 53-1001156-01...
Page 260 fcFxPortFcphVersionLow 1.3.6.1.2.1.75.1.1.5.1.4 fcFxPortFcphVersionLow 1.3.6.1.2.1.75.1.1.5.1.4 The lowest or earliest version of FC-PH that the Fx_Port is configured to support. This value is always 6, Fabric OS MIB Reference 53-1001156-01...
Page 261 fcFxPortBbCredit 1.3.6.1.2.1.75.1.1.5.1.5 fcFxPortBbCredit 1.3.6.1.2.1.75.1.1.5.1.5 The total number of receive buffers available for holding Class 1 connect-request, and Class 2 or 3 frames from the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from the attached Nx_Port (if applicable) to Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 262 fcFxPortRxBufSize 1.3.6.1.2.1.75.1.1.5.1.6 fcFxPortRxBufSize 1.3.6.1.2.1.75.1.1.5.1.6 The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 263 fcFxPortRatov 1.3.6.1.2.1.75.1.1.5.1.7 fcFxPortRatov 1.3.6.1.2.1.75.1.1.5.1.7 The Resource_Allocation_Timeout value configured for the Fx_Port. This is used as the time-out value for determining when to reuse an Nx_Port resource such as a Recovery_Qualifier. It represents E_D_TOV (Refer to “fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.8” on page 248) plus twice the maximum time that a frame might be delayed within the fabric and still be delivered.
Page 264 fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.8 fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.8 The E_D_TOV value configured for the Fx_Port. The Error_Detect_Timeout value is used as the time-out value for detecting an error condition. Fabric OS MIB Reference 53-1001156-01...
Page 265 fcFxPortCosSupported 1.3.6.1.2.1.75.1.1.5.1.9 fcFxPortCosSupported 1.3.6.1.2.1.75.1.1.5.1.9 A value indicating the set of Classes of Service supported by the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 266 fcFxPortIntermixSupported 1.3.6.1.2.1.75.1.1.5.1.10 fcFxPortIntermixSupported 1.3.6.1.2.1.75.1.1.5.1.10 A flag indicating whether the Fx_Port supports an Intermixed Dedicated Connection. 1 - true 2- false Fabric OS MIB Reference 53-1001156-01...
Page 267 fcFxPortStackedConnMode 1.3.6.1.2.1.75.1.1.5.1.11 fcFxPortStackedConnMode 1.3.6.1.2.1.75.1.1.5.1.11 A value indicating the mode of Stacked Connect supported by the Fx_Port. 1 - none 2 - transparent 3 - locked down Fabric OS MIB Reference 53-1001156-01...
Page 268 fcFxPortClass2SeqDeliv 1.3.6.1.2.1.75.1.1.5.1.12 fcFxPortClass2SeqDeliv 1.3.6.1.2.1.75.1.1.5.1.12 A flag indicating whether Class 2 Sequential Delivery is supported by the Fx_Port. 1 - true 2- false Fabric OS MIB Reference 53-1001156-01...
Page 269 fcFxPortClass3SeqDeliv 1.3.6.1.2.1.75.1.1.5.1.13 fcFxPortClass3SeqDeliv 1.3.6.1.2.1.75.1.1.5.1.13 A flag indicating whether Class 3 Sequential Delivery is supported by the Fx_Port. 1 - true 2- false Fabric OS MIB Reference 53-1001156-01...
Page 270: Fcfestatus Group
fcFxPortHoldTime 1.3.6.1.2.1.75.1.1.5.1.14 fcFxPortHoldTime 1.3.6.1.2.1.75.1.1.5.1.14 The maximum time (in microseconds) that the Fx_Port holds a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that the Fx_Port does not support this parameter. fcFeStatus Group This group consists of tables that contain operational status and established service parameters for the fabric element and the attached Nx_Ports.
Page 271 fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 A table that contains operational status and parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element. Fabric OS MIB Reference 53-1001156-01...
Page 272 fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 An entry containing operational status and parameters of an Fx_Port. Augments 1: fcFxPortEntry Fabric OS MIB Reference 53-1001156-01...
Page 273 fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 The address identifier by which this Fx_Port is identified within the fabric. The Fx_Port might assign its address identifier to its attached Nx_Port(s) during fabric login. Fabric OS MIB Reference 53-1001156-01...
Page 274 fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 fcFxPortBbCreditAvailable 1.3.6.1.2.1.75.1.2.1.1.2 The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit. Fabric OS MIB Reference 53-1001156-01...
Page 275 fcFxPortOperMode 1.3.6.1.2.1.75.1.2.1.1.3 fcFxPortOperMode 1.3.6.1.2.1.75.1.2.1.1.3 The current operational mode of the Fx_Port. Values Possible values are: 1: unknown(1) 2: fPort(2) 3: flPort(3) Fabric OS MIB Reference 53-1001156-01...
Page 276 fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4 fcFxPortAdminMode 1.3.6.1.2.1.75.1.2.1.1.4 The desired operational mode of the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 277 Fx_Port Physical Level Table Fx_Port Physical Level Table This table contains the physical level status and parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element. Fabric OS MIB Reference 53-1001156-01...
Page 278 fcFxPortPhysTable 1.3.6.1.2.1.75.1.2.2 fcFxPortPhysTable 1.3.6.1.2.1.75.1.2.2 A table that contains the physical level status and parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element. Fabric OS MIB Reference 53-1001156-01...
Page 279 fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 An entry containing physical level status and parameters of an Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 280 fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1 fcFxPortPhysAdminStatus 1.3.6.1.2.1.75.1.2.2.1.1 The desired state of the Fx_Port. A management station might place the Fx_Port in a desired state by setting this object accordingly. Values Possible values are: 1: online(1) 2: offline(2) 3: testing(3) The testing state (3) indicates that no operational frames can be passed. When a fabric element initializes, all Fx_Ports start with fcFxPortPhysAdminStatus in the offline state (2).
Page 281 fcFxPortPhysOperStatus 1.3.6.1.2.1.75.1.2.2.1.2 fcFxPortPhysOperStatus 1.3.6.1.2.1.75.1.2.2.1.2 The current operational status of the Fx_Port. Values Possible values are: 1: online(1) 2: offline(2) 3: testing(3) 4: linkFailure(4) The testing state (3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2). If fcFxPortPhysAdminStatus is changed to online (1), then fcFxPortPhysOperStatus should change to online (1) if the Fx_Port is ready to accept fabric login request from the attached Nx_Port;...
Page 282 fcFxPortPhysLastChange 1.3.6.1.2.1.75.1.2.2.1.3 fcFxPortPhysLastChange 1.3.6.1.2.1.75.1.2.2.1.3 The value of sysUpTime at the time the Fx_Port entered its current operational status. A value of 0 indicates that the Fx_Port operational status has not changed since the agent last restarted. Fabric OS MIB Reference 53-1001156-01...
Page 283 fcFxPortPhysRttov 1.3.6.1.2.1.75.1.2.2.1.4 fcFxPortPhysRttov 1.3.6.1.2.1.75.1.2.2.1.4 The Receiver_Transmitter_Timeout value of the Fx_Port. This is used by the receiver logic to detect loss of synchronization. This value is displayed in milliseconds. NOTE This object is read-only. It is listed incorrectly in the MIB definition as read-write. Fabric OS MIB Reference 53-1001156-01...
Page 284 Fx_Port Fabric Login Table Fx_Port Fabric Login Table This table contains one entry for each Fx_Port in the fabric element and the service parameters that have been established from the most recent fabric login, whether implicit or explicit. Fabric OS MIB Reference 53-1001156-01...
Page 285 fcFxloginTable 1.3.6.1.2.1.75.1.2.3 fcFxloginTable 1.3.6.1.2.1.75.1.2.3 A table that contains services parameters established from the most recent fabric login, explicit or implicit, one entry for each Fx_Port in the fabric element. Fabric OS MIB Reference 53-1001156-01...
Page 286 fcFxloginEntry 1.3.6.1.2.1.75.1.2.3.1 fcFxloginEntry 1.3.6.1.2.1.75.1.2.3.1 An entry containing service parameters established from a successful fabric login. Indexes 1: fcFeModuleIndex 2: fcFxPortIndex 3: fcFxPortNxLoginIndex Fabric OS MIB Reference 53-1001156-01...
Page 287 fcFxPortNxLoginIndex 1.3.6.1.2.1.75.1.2.3.1.1 fcFxPortNxLoginIndex 1.3.6.1.2.1.75.1.2.3.1.1 The associated Nx_Port in the attachment for which the entry contains information. Fabric OS MIB Reference 53-1001156-01...
Page 288 fcFxPortFcphVersionAgreed 1.3.6.1.2.1.75.1.2.3.1.2 fcFxPortFcphVersionAgreed 1.3.6.1.2.1.75.1.2.3.1.2 The version of FC-PH that the Fx_Port has agreed to support from the fabric login. Fabric OS MIB Reference 53-1001156-01...
Page 289 fcFxPortNxPortBbCredit 1.3.6.1.2.1.75.1.2.3.1.3 fcFxPortNxPortBbCredit 1.3.6.1.2.1.75.1.2.3.1.3 The total number of buffers available for holding Class 1 connect-request, and Class 2 or Class 3 frames to be transmitted to the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from Fx_Port to Nx_Port. The buffer-to-buffer flow control mechanism is indicated in the respective fcFxPortBbCreditModel.
Page 290 fcFxPortNxPortRxDataFieldSize 1.3.6.1.2.1.75.1.2.3.1.4 fcFxPortNxPortRxDataFieldSize 1.3.6.1.2.1.75.1.2.3.1.4 The Receive Data Field Size of the attached Nx_Port. This is a binary value that specifies the largest Data Field Size for an FT_1 frame that can be received by the Nx_Port. The value is a number of bytes in the range 128 to 2112, inclusive.
Page 291 fcFxPortCosSuppAgreed 1.3.6.1.2.1.75.1.2.3.1.5 fcFxPortCosSuppAgreed 1.3.6.1.2.1.75.1.2.3.1.5 Indicates that the attached Nx_Port has requested the Fx_Port for the support of classes of services and the Fx_Port has granted the request. Fabric OS MIB Reference 53-1001156-01...
Page 292 fcFxPortIntermixSuppAgreed 1.3.6.1.2.1.75.1.2.3.1.6 fcFxPortIntermixSuppAgreed 1.3.6.1.2.1.75.1.2.3.1.6 A variable indicating that the attached Nx_Port has requested the Fx_Port for Intermix support, and the Fx_Port has granted the request. This flag is only valid if Class 1 service is supported. Fabric OS MIB Reference 53-1001156-01...
Page 293 fcFxPortStackedConnModeAgreed 1.3.6.1.2.1.75.1.2.3.1.7 fcFxPortStackedConnModeAgreed 1.3.6.1.2.1.75.1.2.3.1.7 Indicates whether the Fx_Port has agreed to support stacked connect from the fabric login. This is only meaningful if Class 1 service has been agreed to. Fabric OS MIB Reference 53-1001156-01...
Page 294 fcFxPortClass2SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.8 fcFxPortClass2SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.8 Indicates whether the Fx_Port has agreed to support Class 2 sequential delivery from the fabric login. This is only meaningful if Class 2 service has been agreed to. Values Possible values are: • yes (1) The Fx_Port has agreed to support Class 2 sequential delivery from the fabric login. •...
Page 295 fcFxPortClass3SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.9 fcFxPortClass3SeqDelivAgreed 1.3.6.1.2.1.75.1.2.3.1.9 A flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery from the fabric login. This is only meaningful if Class 3 service has been agreed to. Values Possible values are: • yes (1) The Fx_Port has agreed to support Class 3 sequential delivery from the fabric login. •...
Page 296 fcFxPortNxPortName 1.3.6.1.2.1.75.1.2.3.1.10 fcFxPortNxPortName 1.3.6.1.2.1.75.1.2.3.1.10 The port name of the attached Nx_Port, if applicable. If the value of this object is ‘0000000000000000’H, this Fx_Port has no Nx_Port attached to it. If the Fx_Port has no attached Nx_Port then the instance of the port is not displayed. Fabric OS MIB Reference 53-1001156-01...
Page 297 fcFxPortConnectedNxPort 1.3.6.1.2.1.75.1.2.3.1.11 fcFxPortConnectedNxPort 1.3.6.1.2.1.75.1.2.3.1.11 The address identifier of the destination Fx_Port with which this Fx_Port is currently engaged in either a Class 1 or loop connection. If the value of this object is ‘000000’H, this Fx_Port is not engaged in a connection. If the Fx_Port has no attached Nx_Port then the instance of the port is not displayed.
Page 298: Fcfeerror Group
fcFxPortBbCreditModel 1.3.6.1.2.1.75.1.2.3.1.12 fcFxPortBbCreditModel 1.3.6.1.2.1.75.1.2.3.1.12 Identifies the BB_Credit model used by the Fx_Port. The regular model refers to the buffer-to-buffer flow control mechanism defined in FC-PH [1] used between the F_Port and the N_Port. For FL_Ports, the alternate buffer-to-buffer flow control mechanism as defined in FC-AL [4] is used between the FL_Port and any attached NL_Ports.
Page 299 fcFxPortErrorTable 1.3.6.1.2.1.75.1.3.1 fcFxPortErrorTable 1.3.6.1.2.1.75.1.3.1 A table that contains counters that record the numbers of errors detected, one entry for each Fx_Port. This table contains counters recording numbers of errors detected since the management agent reinitialized, one entry for each Fx_Port in the fabric element. The first six columnar objects after the port index correspond to the counters in the link error status block.
Page 300 fcFxPortErrorEntry 1.3.6.1.2.1.75.1.3.1.1 fcFxPortErrorEntry 1.3.6.1.2.1.75.1.3.1.1 An entry containing error counters of a Fx_Port. Augments 1: fcFxPortEntry Fabric OS MIB Reference 53-1001156-01...
Page 301 fcFxPortLinkFailures 1.3.6.1.2.1.75.1.3.1.1.1 fcFxPortLinkFailures 1.3.6.1.2.1.75.1.3.1.1.1 The number of link failures detected by this Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 302 fcFxPortSyncLosses 1.3.6.1.2.1.75.1.3.1.1.2 fcFxPortSyncLosses 1.3.6.1.2.1.75.1.3.1.1.2 The number of loss of synchronization errors detected by the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 303 fcFxPortSigLosses 1.3.6.1.2.1.75.1.3.1.1.3 fcFxPortSigLosses 1.3.6.1.2.1.75.1.3.1.1.3 The number of loss of signal errors detected by the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 304 fcFxPortPrimSeqProtoErrors 1.3.6.1.2.1.75.1.3.1.1.4 fcFxPortPrimSeqProtoErrors 1.3.6.1.2.1.75.1.3.1.1.4 The number of primitive sequence protocol errors detected by the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 305 fcFxPortInvalidTxWords 1.3.6.1.2.1.75.1.3.1.1.5 fcFxPortInvalidTxWords 1.3.6.1.2.1.75.1.3.1.1.5 The number of invalid transmission word errors detected by the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 306 fcFxPortInvalidCrcs 1.3.6.1.2.1.75.1.3.1.1.6 fcFxPortInvalidCrcs 1.3.6.1.2.1.75.1.3.1.1.6 The number of invalid cyclic redundancy checks (CRC) detected by this Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 307 fcFxPortDelimiterErrors 1.3.6.1.2.1.75.1.3.1.1.7 fcFxPortDelimiterErrors 1.3.6.1.2.1.75.1.3.1.1.7 The number of delimiter errors detected by this Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 308 fcFxPortAddressIdErrors 1.3.6.1.2.1.75.1.3.1.1.8 fcFxPortAddressIdErrors 1.3.6.1.2.1.75.1.3.1.1.8 The number of address identifier errors detected by this Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 309 fcFxPortLinkResetIns 1.3.6.1.2.1.75.1.3.1.1.9 fcFxPortLinkResetIns 1.3.6.1.2.1.75.1.3.1.1.9 The number of Link Reset Protocol errors received by this Fx_Port from the attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 310 fcFxPortLinkResetOuts 1.3.6.1.2.1.75.1.3.1.1.10 fcFxPortLinkResetOuts 1.3.6.1.2.1.75.1.3.1.1.10 The number of Link Reset Protocol errors issued by this Fx_Port to the attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 311 fcFxPortOlsIns 1.3.6.1.2.1.75.1.3.1.1.11 fcFxPortOlsIns 1.3.6.1.2.1.75.1.3.1.1.11 The number of Offline Sequence errors received by this Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 312: Fefcaccounting Group
fcFxPortOlsOuts 1.3.6.1.2.1.75.1.3.1.1.12 fcFxPortOlsOuts 1.3.6.1.2.1.75.1.3.1.1.12 The number of Offline Sequence issued by this Fx_Port. feFcAccounting Group The Accounting group is supported only in Fabric OS v4.x. The Accounting group consists of the following tables: • Class 1 accounting table • Class 2 accounting table •...
Page 313 fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.1 fcFxPortC1AccountingTable 1.3.6.1.2.1.75.1.4.1 A table that contains Class 1 accounting information recorded since the management agent reinitialized, one entry for each Fx_Port in the fabric element. Fabric OS MIB Reference 53-1001156-01...
Page 314 fcFxPortC1AccountingEntry 1.3.6.1.2.1.75.1.4.1.1 fcFxPortC1AccountingEntry 1.3.6.1.2.1.75.1.4.1.1 An entry containing Class 1 accounting information for each Fx_Port. Augments: 1: fcFxPortEntry Fabric OS MIB Reference 53-1001156-01...
Page 315 fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1 fcFxPortC1InFrames 1.3.6.1.2.1.75.1.4.1.1.1 The number of Class 1 frames (other than Class 1 connect-request) received by this Fx_Port from its attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 316 fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 fcFxPortC1OutFrames 1.3.6.1.2.1.75.1.4.1.1.2 The number of Class 1 frames (other than Class 1 connect-request) delivered through this Fx_Port to its attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 317 fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 fcFxPortC1InOctets 1.3.6.1.2.1.75.1.4.1.1.3 The number of Class 1 frame octets, including the frame delimiters, received by this Fx_Port from its attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 318 fcFxPortC1OutOctets 1.3.6.1.2.1.75.1.4.1.1.4 fcFxPortC1OutOctets 1.3.6.1.2.1.75.1.4.1.1.4 The number of Class 1 frame octets, including the frame delimiters, delivered through this Fx_Port its attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 319 fcFxPortC1Discards 1.3.6.1.2.1.75.1.4.1.1.5 fcFxPortC1Discards 1.3.6.1.2.1.75.1.4.1.1.5 The number of Class 1 frames discarded by this Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 320 fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6 fcFxPortC1FbsyFrames 1.3.6.1.2.1.75.1.4.1.1.6 The number of F_BSY frames generated by this Fx_Port against Class 1 connect-request. Fabric OS MIB Reference 53-1001156-01...
Page 321 fcFxPortC1FrjtFrames 1.3.6.1.2.1.75.1.4.1.1.7 fcFxPortC1FrjtFrames 1.3.6.1.2.1.75.1.4.1.1.7 The number of F_RJT frames generated by this Fx_Port against Class 1 connect-request. Fabric OS MIB Reference 53-1001156-01...
Page 322 fcFxPortC1InConnections 1.3.6.1.2.1.75.1.4.1.1.8 fcFxPortC1InConnections 1.3.6.1.2.1.75.1.4.1.1.8 The number of Class 1 connections successfully established in which the attached Nx_Port is the source of the connect-request. Fabric OS MIB Reference 53-1001156-01...
Page 323 fcFxPortC1OutConnections 1.3.6.1.2.1.75.1.4.1.1.9 fcFxPortC1OutConnections 1.3.6.1.2.1.75.1.4.1.1.9 The number of Class 1 connections successfully established in which the attached Nx_Port is the destination of the connect-request. Fabric OS MIB Reference 53-1001156-01...
Page 324 fcFxPortC1ConnTime 1.3.6.1.2.1.75.1.4.1.1.10 fcFxPortC1ConnTime 1.3.6.1.2.1.75.1.4.1.1.10 The cumulative time that this Fx_Port has been engaged in Class 1 connection. The amount of time is counted from after a connect-request has been accepted until the connection is disengaged, either by an EOFdt or Link Reset. Fabric OS MIB Reference 53-1001156-01...
Page 325 fcFxPortC2AccountingTable 1.3.6.1.2.1.75.1.4.2 fcFxPortC2AccountingTable 1.3.6.1.2.1.75.1.4.2 A table that contains Class 2 accounting information recorded since the management agent has reinitialized, one entry for each Fx_Port in the fabric element. Fabric OS MIB Reference 53-1001156-01...
Page 326 fcFxPortC2AccountingEntry 1.3.6.1.2.1.75.1.4.2.1 fcFxPortC2AccountingEntry 1.3.6.1.2.1.75.1.4.2.1 An entry containing Class 2 accounting information for each Fx_Port. Augments: 1: fcFxPortEntry Fabric OS MIB Reference 53-1001156-01...
Page 327 fcFxPortC2InFrames 1.3.6.1.2.1.75.1.4.2.1.1 fcFxPortC2InFrames 1.3.6.1.2.1.75.1.4.2.1.1 The number of Class 2 frames received by this Fx_Port from its attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 328 fcFxPortC2OutFrames 1.3.6.1.2.1.75.1.4.2.1.2 fcFxPortC2OutFrames 1.3.6.1.2.1.75.1.4.2.1.2 The number of Class 2 frames delivered through this Fx_Port to its attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 329 fcFxPortC2InOctets 1.3.6.1.2.1.75.1.4.2.1.3 fcFxPortC2InOctets 1.3.6.1.2.1.75.1.4.2.1.3 The number of Class 2 frame octets, including the frame delimiters, received by this Fx_Port from its attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 330 fcFxPortC2OutOctets 1.3.6.1.2.1.75.1.4.2.1.4 fcFxPortC2OutOctets 1.3.6.1.2.1.75.1.4.2.1.4 The number of Class 2 frame octets, including the frame delimiters, delivered through this Fx_Port to its attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 331 fcFxPortC2Discards 1.3.6.1.2.1.75.1.4.2.1.5 fcFxPortC2Discards 1.3.6.1.2.1.75.1.4.2.1.5 The number of Class 2 frames discarded by this Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 332 fcFxPortC2FbsyFrames 1.3.6.1.2.1.75.1.4.2.1.6 fcFxPortC2FbsyFrames 1.3.6.1.2.1.75.1.4.2.1.6 The number of F_BSY frames generated by this Fx_Port against Class 2 frames. Fabric OS MIB Reference 53-1001156-01...
Page 333 fcFxPortC2FrjtFrames 1.3.6.1.2.1.75.1.4.2.1.7 fcFxPortC2FrjtFrames 1.3.6.1.2.1.75.1.4.2.1.7 The number of F_RJT frames generated by this Fx_Port against Class 2 frames. Fabric OS MIB Reference 53-1001156-01...
Page 334 fcFxPortC3AccountingTable 1.3.6.1.2.1.75.1.4.3 fcFxPortC3AccountingTable 1.3.6.1.2.1.75.1.4.3 A table that contains Class 3 accounting information recorded since the management agent has reinitialized, one entry for each Fx_Port in the fabric element. Fabric OS MIB Reference 53-1001156-01...
Page 335 fcFxPortC3AccountingEntry 1.3.6.1.2.1.75.1.4.3.1 fcFxPortC3AccountingEntry 1.3.6.1.2.1.75.1.4.3.1 An entry containing Class 3 accounting information for each Fx_Port. Augments: 1: fcFxPortEntry Fabric OS MIB Reference 53-1001156-01...
Page 336 fcFxPortC3InFrames 1.3.6.1.2.1.75.1.4.3.1.1 fcFxPortC3InFrames 1.3.6.1.2.1.75.1.4.3.1.1 The number of Class 3 frames received by this Fx_Port from its attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 337 fcFxPortC3OutFrames 1.3.6.1.2.1.75.1.4.3.1.2 fcFxPortC3OutFrames 1.3.6.1.2.1.75.1.4.3.1.2 The number of Class 3 frames delivered through this Fx_Port to its attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 338 fcFxPortC3InOctets 1.3.6.1.2.1.75.1.4.3.1.3 fcFxPortC3InOctets 1.3.6.1.2.1.75.1.4.3.1.3 The number of Class 3 frame octets, including the frame delimiters, received by this Fx_Port from its attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 339 fcFxPortC3OutOctets 1.3.6.1.2.1.75.1.4.3.1.4 fcFxPortC3OutOctets 1.3.6.1.2.1.75.1.4.3.1.4 The number of Class 3 frame octets, including the frame delimiters, delivered through this Fx_Port to its attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 340: Fcfecapability Group
fcFxPortC3Discards 1.3.6.1.2.1.75.1.4.3.1.5 fcFxPortC3Discards 1.3.6.1.2.1.75.1.4.3.1.5 The number of Class 3 frames discarded by this Fx_Port. fcFeCapability Group This group consists of a table describing information about what each Fx_Port is inherently capable of operating or supporting. A capability might be used, as expressed in its respective object value in the Configuration group.
Page 341 fcFxPortCapTable 1.3.6.1.2.1.75.1.5.1 fcFxPortCapTable 1.3.6.1.2.1.75.1.5.1 A table that contains the capabilities of the port within the fabric element, one entry for each Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 342 fcFxPortCapEntry 1.3.6.1.2.1.75.1.5.1.1 fcFxPortCapEntry 1.3.6.1.2.1.75.1.5.1.1 An entry containing the capabilities of a Fx_Port. Augments: 1: fcFxPortEntry Fabric OS MIB Reference 53-1001156-01...
Page 343 fcFxPortCapFcphVersionHigh 1.3.6.1.2.1.75.1.5.1.1.1 fcFxPortCapFcphVersionHigh 1.3.6.1.2.1.75.1.5.1.1.1 The highest or most recent version of FC-PH that the Fx_Port is capable of supporting. Fabric OS MIB Reference 53-1001156-01...
Page 344 fcFxPortCapFcphVersionLow 1.3.6.1.2.1.75.1.5.1.1.2 fcFxPortCapFcphVersionLow 1.3.6.1.2.1.75.1.5.1.1.2 The lowest or earliest version of FC-PH that the Fx_Port is capable of supporting. Fabric OS MIB Reference 53-1001156-01...
Page 345 fcFxPortCapBbCreditMax 1.3.6.1.2.1.75.1.5.1.1.3 fcFxPortCapBbCreditMax 1.3.6.1.2.1.75.1.5.1.1.3 The maximum number of receive buffers available for holding Class 1 connect-request, and Class 2 or Class 3 frames from the attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 346 fcFxPortCapBbCreditMin 1.3.6.1.2.1.75.1.5.1.1.4 fcFxPortCapBbCreditMin 1.3.6.1.2.1.75.1.5.1.1.4 The minimum number of receive buffers available for holding Class 1 connect-request, and Class 2 or Class 3 frames from the attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 347 fcFxPortCapRxDataFieldSizeMax 1.3.6.1.2.1.75.1.5.1.1.5 fcFxPortCapRxDataFieldSizeMax 1.3.6.1.2.1.75.1.5.1.1.5 The maximum size (in bytes) of the data field in a frame that the Fx_Port is capable of receiving from its attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 348 fcFxPortCapRxDataFieldSizeMin 1.3.6.1.2.1.75.1.5.1.1.6 fcFxPortCapRxDataFieldSizeMin 1.3.6.1.2.1.75.1.5.1.1.6 The minimum size (in bytes) of the data field in a frame that the Fx_Port is capable of receiving from its attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 349 fcFxPortCapCos 1.3.6.1.2.1.75.1.5.1.1.7 fcFxPortCapCos 1.3.6.1.2.1.75.1.5.1.1.7 A value indicating the set of Classes of Service that the Fx_Port is capable of supporting. Fabric OS MIB Reference 53-1001156-01...
Page 350 fcFxPortCapIntermix 1.3.6.1.2.1.75.1.5.1.1.8 fcFxPortCapIntermix 1.3.6.1.2.1.75.1.5.1.1.8 A flag indicating whether the Fx_Port is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 service.
Page 351 fcFxPortCapStackedConnMode 1.3.6.1.2.1.75.1.5.1.1.9 fcFxPortCapStackedConnMode 1.3.6.1.2.1.75.1.5.1.1.9 A value indicating the mode of Stacked Connect request that the Fx_Port is capable of supporting. Fabric OS MIB Reference 53-1001156-01...
Page 352 fcFxPortCapClass2SeqDeliv 1.3.6.1.2.1.75.1.5.1.1.10 fcFxPortCapClass2SeqDeliv 1.3.6.1.2.1.75.1.5.1.1.10 A flag indicating whether the Fx_Port is capable of supporting Class 2 Sequential Delivery. Fabric OS MIB Reference 53-1001156-01...
Page 353 fcFxPortCapClass3SeqDeliv 1.3.6.1.2.1.75.1.5.1.1.11 fcFxPortCapClass3SeqDeliv 1.3.6.1.2.1.75.1.5.1.1.11 A flag indicating whether the Fx_Port is capable of supporting Class 3 Sequential Delivery. Fabric OS MIB Reference 53-1001156-01...
Page 354 fcFxPortCapHoldTimeMax 1.3.6.1.2.1.75.1.5.1.1.12 fcFxPortCapHoldTimeMax 1.3.6.1.2.1.75.1.5.1.1.12 The maximum holding time (in microseconds) that the Fx_Port is capable of supporting. Fabric OS MIB Reference 53-1001156-01...
Page 355 fcFxPortCapHoldTimeMin 1.3.6.1.2.1.75.1.5.1.1.13 fcFxPortCapHoldTimeMin 1.3.6.1.2.1.75.1.5.1.1.13 The minimum holding time (in microseconds) that the Fx_Port is capable of supporting. Fabric OS MIB Reference 53-1001156-01...
Page 356: Fcfabric-Element-Mib (Experimental Branch)
FCFABRIC-ELEMENT-MIB (Experimental Branch) FCFABRIC-ELEMENT-MIB (Experimental Branch) NOTE The FCFABRIC-ELEMENT-MIB is supported only in Fabric OS v2.6.x and v3.0.x. This section contains descriptions and other information that is specific to FCFABRIC-ELEMENT-MIB (in the experimental branch), including the following: • FCFABRIC-ELEMENT-MIB Organization ......341 •...
Page 357: Fcfabric-Element-Mib Organization
FCFABRIC-ELEMENT-MIB Organization FCFABRIC-ELEMENT-MIB Organization Figures through depict the organization and structure of FCFABRIC-ELEMENT-MIB. - iso - org - dod - internet - experimental - fibreChannel - fcFabric - fcFe - fcFeConfig - fcFabricName - fcElementName - fcFeModuleCapacity - fcFeModuleTable - fcFxConfTable - fcFeOp - fcFxPortOperTable - fcFxPortPhysTable...
Page 358 FCFABRIC-ELEMENT-MIB Organization - fcFeConfig fcFabricName 1.3.6.1.3.42.2.1.1.1 fcElementName 1.3.6.1.3.42.2.1.1.2 fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 fcFeModuleTable 1.3.6.1.3.42.2.1.1.4 fcFeModuleEntry 1.3.6.1.3.42.2.1.1.4.1 fcFeModuleIndex 1.3.6.1.3.42.2.1.1.4.1.1 fcFeModuleDescr 1.3.6.1.3.42.2.1.1.4.1.2 fcFeModuleObjectID 1.3.6.1.3.42.2.1.1.4.1.3 fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 fcFeModuleLastChange 1.3.6.1.3.42.2.1.1.4.1.5 fcFeModuleFxPortCapacity 1.3.6.1.3.42.2.1.1.4.1.6 fcFeModuleName 1.3.6.1.3.42.2.1.1.4.1.7 fcFxConfTable 1.3.6.1.3.42.2.1.1.5 fcFxConfEntry 1.3.6.1.3.42.2.1.1.5.1 fcFxConfModuleIndex 1.3.6.1.3.42.2.1.1.5.1.1 fcFxConfFxPortIndex 1.3.6.1.3.42.2.1.1.5.1.2 fcFxPortName 1.3.6.1.3.42.2.1.1.5.1.3 fcFxPortFcphVersionHigh 1.3.6.1.3.42.2.1.1.5.1.4 fcFxPortFcphVersionLow 1.3.6.1.3.42.2.1.1.5.1.5 fcFxPortBbCredit 1.3.6.1.3.42.2.1.1.5.1.6 fcFxPortRxBufSize 1.3.6.1.3.42.2.1.1.5.1.7...
Page 359 FCFABRIC-ELEMENT-MIB Organization - fcFeOp fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 fcFxPortOperEntry 1.3.6.1.3.42.2.1.2.1.1 fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.1 fcFxPortOperFxPortIndex 1.3.6.1.3.42.2.1.2.1.1.2 fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 fcFPortAttachedPortName 1.3.6.1.3.42.2.1.2.1.1.4 fcFPortConnectedPort 1.3.6.1.3.42.2.1.2.1.1.5 fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6 fcFxPortOperMode 1.3.6.1.3.42.2.1.2.1.1.7 fcFxPortAdminMode 1.3.6.1.3.42.2.1.2.1.1.8 fcFxPortPhysTable 1.3.6.1.3.42.2.1.2.3 fcFxPortPhysEntry 1.3.6.1.3.42.2.1.2.3.1 fcFxPortPhysModuleIndex 1.3.6.1.3.42.2.1.2.3.1.1 fcFxPortPhysFxPortIndex 1.3.6.1.3.42.2.1.2.3.1.2 fcFxPortPhysAdminStatus 1.3.6.1.3.42.2.1.2.3.1.3 fcFxPortPhysOperStatus 1.3.6.1.3.42.2.1.2.3.1.4 fcFxPortPhysLastChange 1.3.6.1.3.42.2.1.2.3.1.5 fcFxPortPhysRttov 1.3.6.1.3.42.2.1.2.3.1.6 fcFxlogiTable 1.3.6.1.3.42.2.1.2.4 fcFxlogiEntry 1.3.6.1.3.42.2.1.2.4.1 fcFxlogiModuleIndex 1.3.6.1.3.42.2.1.2.4.1.1...
Page 360 FCFABRIC-ELEMENT-MIB Organization FIGURE 26 fcFeError Hierarchy - fcFeAcct (-- Not Supported --) FIGURE 27 fcFeAcct Hierarchy - fcFeCap fcFxPortCapTable 1.3.6.1.3.42.2.1.5.1 fcFxPortCapEntry 1.3.6.1.3.42.2.1.5.1.1 fcFxPortCapModuleIndex 1.3.6.1.3.42.2.1.5.1.1.1 fcFxPortCapFxPortIndex 1.3.6.1.3.42.2.1.5.1.1.2 fcFxPortCapFcphVersionHigh 1.3.6.1.3.42.2.1.5.1.1.3 fcFxPortCapFcphVersionLow 1.3.6.1.3.42.2.1.5.1.1.4 fcFxPortCapBbCreditMax 1.3.6.1.3.42.2.1.5.1.1.5 fcFxPortCapBbCreditMin 1.3.6.1.3.42.2.1.5.1.1.6 fcFxPortCapRxDataFieldSizeMax 1.3.6.1.3.42.2.1.5.1.1.7 fcFxPortCapRxDataFieldSizeMin 1.3.6.1.3.42.2.1.5.1.1.8 fcFxPortCapCos 1.3.6.1.3.42.2.1.5.1.1.9 fcFxPortCapIntermix 1.3.6.1.3.42.2.1.5.1.1.10 fcFxPortCapStackedConnMode 1.3.6.1.3.42.2.1.5.1.1.11 fcFxPortCapClass2SeqDeliv 1.3.6.1.3.42.2.1.5.1.1.12...
Page 361: Definitions For Fcfabric-Element-Mib
Definitions for FCFABRIC-ELEMENT-MIB Definitions for FCFABRIC-ELEMENT-MIB The following definitions are used for FCFABRIC-ELEMENT-MIB. TABLE 8 FCFABRIC-ELEMENT-MIB Definitions Type Definition Value Description Display string Octet string of size 0 to 255 Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854.
Page 362 Definitions for FCFABRIC-ELEMENT-MIB TABLE 8 FCFABRIC-ELEMENT-MIB Definitions (Continued) Type Definition Value Description Fc0BaudRate Integer according to FC-0 baud 1 (other) None of below rates 2 (one-eighth) 155 Mbaud (12.5 MB/s) 4 (quarter) 266 Mbaud (25.0 MB/s) 8 (half) 532 Mbaud (50.0 MB/s) 16 (full) 1 Gbaud (100 MB/s) 32 (double) 2 Gbaud (200 MB/s) 64 (quadruple) 4 Gbaud (400 MB/s)
Page 363: Fcfeconfig Group
fcFeConfig Group TABLE 8 FCFABRIC-ELEMENT-MIB Definitions (Continued) Type Definition Value Description FcFeNxPortIndex Integer from 1 to 256 Represents the NxPort index within a conceptual table. FcFxPortMode Integer 1 (unknown) 2 (fPort) 3 (flPort) FcBbCreditModel Integer 1 (regular) 2 (alternate) fcFeConfig Group This group consists of scalar objects and tables.
Page 364 fcFabricName 1.3.6.1.3.42.2.1.1.1 fcFabricName 1.3.6.1.3.42.2.1.1.1 The Name_Identifier of the fabric to which this fabric element belongs. Return Returns the WWN of the primary switch in the fabric. Fabric OS MIB Reference 53-1001156-01...
Page 365 fcElementName 1.3.6.1.3.42.2.1.1.2 fcElementName 1.3.6.1.3.42.2.1.1.2 The Name_Identifier of the fabric element. Return Returns the WWN of the switch. Fabric OS MIB Reference 53-1001156-01...
Page 366 fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 fcFeModuleCapacity 1.3.6.1.3.42.2.1.1.3 The maximum number of modules in the fabric element, regardless of their current state. The Brocade 12000, 24000, and 48000 directors do not support this MIB variable. The Value for fcFeModuleCapacity is always 1 for all the supported switches. Fabric OS MIB Reference 53-1001156-01...
Page 367 fc Fabric Element Module Table fc Fabric Element Module Table This table contains one entry for each module, information of the modules. Fabric OS MIB Reference 53-1001156-01...
Page 368 fcFeModuleTable 1.3.6.1.3.42.2.1.1.4 fcFeModuleTable 1.3.6.1.3.42.2.1.1.4 A table that contains, one entry for each module in the fabric element, information of the modules. Fabric OS MIB Reference 53-1001156-01...
Page 369 fcFeModuleEntry 1.3.6.1.3.42.2.1.1.4.1 fcFeModuleEntry 1.3.6.1.3.42.2.1.1.4.1 An entry containing the configuration parameters of a module. Status Mandatory Index fcFeModuleIndex Fabric OS MIB Reference 53-1001156-01...
Page 370 fcFeModuleIndex 1.3.6.1.3.42.2.1.1.4.1.1 fcFeModuleIndex 1.3.6.1.3.42.2.1.1.4.1.1 Identifies the module within the fabric element for which this entry contains information. This value is never greater than fcFeModuleCapacity. Fabric OS MIB Reference 53-1001156-01...
Page 371 fcFeModuleDescr 1.3.6.1.3.42.2.1.1.4.1.2 fcFeModuleDescr 1.3.6.1.3.42.2.1.1.4.1.2 A textual description of the module. This value should include the full name and version identification of the module. It should contain printable ASCII characters. Refer to “sysDescr 1.3.6.1.2.1.1.1” on page 22. Fabric OS MIB Reference 53-1001156-01...
Page 372 fcFeModuleObjectID 1.3.6.1.3.42.2.1.1.4.1.3 fcFeModuleObjectID 1.3.6.1.3.42.2.1.1.4.1.3 The vendor’s authoritative identification of the module. This value might be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forward and unambiguous means for determining what kind of module is being managed. For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor “Neufe Inc.” was assigned the subtree 1.3.6.1.4.1.99649, and had assigned the identifier 1.3.6.1.4.1.99649.3.9 to its ‘FeFiFo-16 PlugInCard.’...
Page 373 fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 fcFeModuleOperStatus 1.3.6.1.3.42.2.1.1.4.1.4 Indicates the operational status of the module: • online (1) The module is functioning properly. • offline (2) The module is not available. • testing (3) The module is under testing. • faulty (4) The module is defective in some way. Fabric OS MIB Reference 53-1001156-01...
Page 374 fcFeModuleLastChange 1.3.6.1.3.42.2.1.1.4.1.5 fcFeModuleLastChange 1.3.6.1.3.42.2.1.1.4.1.5 Contains the value of “sysUpTime 1.3.6.1.2.1.1.3” when the module entered its current operational status. A value of 0 indicates that the operational status of the module has not changed since the agent last restarted. Fabric OS MIB Reference 53-1001156-01...
Page 375 fcFeModuleFxPortCapacity 1.3.6.1.3.42.2.1.1.4.1.6 fcFeModuleFxPortCapacity 1.3.6.1.3.42.2.1.1.4.1.6 The number of Fx_Port that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity, inclusive; however, the numbers are not required to be contiguous. Fabric OS MIB Reference 53-1001156-01...
Page 376 fcFeModuleName 1.3.6.1.3.42.2.1.1.4.1.7 fcFeModuleName 1.3.6.1.3.42.2.1.1.4.1.7 The Name_Identifier of the module. The return value is the WWN of the switch. Fabric OS MIB Reference 53-1001156-01...
Page 377 Fx_Port Configuration Table Fx_Port Configuration Table This table contains, one entry for each Fx_Port, the configuration parameters of the ports. Fabric OS MIB Reference 53-1001156-01...
Page 378 fcFxConfTable 1.3.6.1.3.42.2.1.1.5 fcFxConfTable 1.3.6.1.3.42.2.1.1.5 A table that contains, one entry for each Fx_Port in the fabric element, configuration and service parameters of the Fx_Ports. Fabric OS MIB Reference 53-1001156-01...
Page 379 fcFxConfEntry 1.3.6.1.3.42.2.1.1.5.1 fcFxConfEntry 1.3.6.1.3.42.2.1.1.5.1 An entry containing the configuration and service parameters of an Fx_Port. Index FcFxConfModuleIndex, fcFxConfFxPortIndex Fabric OS MIB Reference 53-1001156-01...
Page 380 fcFxConfModuleIndex 1.3.6.1.3.42.2.1.1.5.1.1 fcFxConfModuleIndex 1.3.6.1.3.42.2.1.1.5.1.1 Identifies the module containing the Fx_Port for which this entry contains information. Fabric OS MIB Reference 53-1001156-01...
Page 381 fcFxConfFxPortIndex 1.3.6.1.3.42.2.1.1.5.1.2 fcFxConfFxPortIndex 1.3.6.1.3.42.2.1.1.5.1.2 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized. Fabric OS MIB Reference 53-1001156-01...
Page 382 fcFxPortName 1.3.6.1.3.42.2.1.1.5.1.3 fcFxPortName 1.3.6.1.3.42.2.1.1.5.1.3 The name identifier of this Fx_Port. Each Fx_Port has a unique port name within the address space of the fabric. The return value is the WWN of the port. Fabric OS MIB Reference 53-1001156-01...
Page 383 fcFxPortFcphVersionHigh 1.3.6.1.3.42.2.1.1.5.1.4 fcFxPortFcphVersionHigh 1.3.6.1.3.42.2.1.1.5.1.4 The highest or most recent version of FC-PH that the Fx_Port is configured to support. Fabric OS MIB Reference 53-1001156-01...
Page 384 fcFxPortFcphVersionLow 1.3.6.1.3.42.2.1.1.5.1.5 fcFxPortFcphVersionLow 1.3.6.1.3.42.2.1.1.5.1.5 The lowest or earliest version of FC-PH that the Fx_Port is configured to support. Fabric OS MIB Reference 53-1001156-01...
Page 385 fcFxPortBbCredit 1.3.6.1.3.42.2.1.1.5.1.6 fcFxPortBbCredit 1.3.6.1.3.42.2.1.1.5.1.6 The total number of receive buffers available for holding Class 1 connect-request Class 2 or 3 frames from the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from the attached Nx_Port (if applicable) to Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 386 fcFxPortRxBufSize 1.3.6.1.3.42.2.1.1.5.1.7 fcFxPortRxBufSize 1.3.6.1.3.42.2.1.1.5.1.7 The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 387 fcFxPortRatov 1.3.6.1.3.42.2.1.1.5.1.8 fcFxPortRatov 1.3.6.1.3.42.2.1.1.5.1.8 The Resource_Allocation_Timeout Value configured for the Fx_Port. This is used as the time-out value for determining when to reuse an Nx_Port resource such as a Recovery_Qualifier. It represents E_D_TOV (Refer to “fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.8” on page 248) plus twice the maximum time that a frame might be delayed within the fabric and still be delivered.
Page 388 fcFxPortEdtov 1.3.6.1.3.42.2.1.1.5.1.9 fcFxPortEdtov 1.3.6.1.3.42.2.1.1.5.1.9 The E_D_TOV value configured for the Fx_Port. The Error_Detect_Timeout Value is used as the time-out value for detecting an error condition. Fabric OS MIB Reference 53-1001156-01...
Page 389 fcFxPortCosSupported 1.3.6.1.3.42.2.1.1.5.1.10 fcFxPortCosSupported 1.3.6.1.3.42.2.1.1.5.1.10 A value indicating the set of Classes of Service supported by the Fx_Port. Values Possible values are: • Class F (0) • Class 1 (1) • Class 2 (2) • Clas 3 (3) • Class 4 (4) •...
Page 390 fcFxPortIntermixSupported 1.3.6.1.3.42.2.1.1.5.1.11 fcFxPortIntermixSupported 1.3.6.1.3.42.2.1.1.5.1.11 A flag indicating whether the Fx_Port supports an Intermixed Dedicated Connection. Values Possible values are: • yes (1) • no (2) Fabric OS MIB Reference 53-1001156-01...
Page 391 fcFxPortStackedConnMode 1.3.6.1.3.42.2.1.1.5.1.12 fcFxPortStackedConnMode 1.3.6.1.3.42.2.1.1.5.1.12 A value indicating the mode of stacked connect supported by the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 392 fcFxPortClass2SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.13 fcFxPortClass2SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.13 A flag indicating whether Class 2 sequential delivery is supported by the Fx_Port. Values Possible values are: • yes (1) • no (2) Fabric OS MIB Reference 53-1001156-01...
Page 393 fcFxPortClass3SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.14 fcFxPortClass3SeqDeliv 1.3.6.1.3.42.2.1.1.5.1.14 A flag indicating whether Class 3 sequential delivery is supported by the Fx_Port. Values Possible values are: • yes (1) • no (2) Fabric OS MIB Reference 53-1001156-01...
Page 394 fcFxPortHoldTime 1.3.6.1.3.42.2.1.1.5.1.15 fcFxPortHoldTime 1.3.6.1.3.42.2.1.1.5.1.15 The maximum time (in microseconds) that the Fx_Port holds a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that the Fx_Port does not support this parameter. Fabric OS MIB Reference 53-1001156-01...
Page 395 fcFxPortBaudRate 1.3.6.1.3.42.2.1.1.5.1.16 fcFxPortBaudRate 1.3.6.1.3.42.2.1.1.5.1.16 The FC-0 baud rate of the Fx_Port. The Brocade 12000, 24000, 48000 , and DCX directors do not support this MIB variable. Fabric OS MIB Reference 53-1001156-01...
Page 396 fcFxPortMedium 1.3.6.1.3.42.2.1.1.5.1.17 fcFxPortMedium 1.3.6.1.3.42.2.1.1.5.1.17 The FC-0 medium of the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 397 fcFxPortTxType 1.3.6.1.3.42.2.1.1.5.1.18 fcFxPortTxType 1.3.6.1.3.42.2.1.1.5.1.18 The FC-0 transmitter type of the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 398: Fcfeop Group
fcFxPortDistance 1.3.6.1.3.42.2.1.1.5.1.19 fcFxPortDistance 1.3.6.1.3.42.2.1.1.5.1.19 The FC-0 distance range of the Fx_Port transmitter. fcFeOp Group This group consists of tables that contain operational status and established service parameters for the fabric element and the attached Nx_Ports. NOTE Implementation of this group is mandatory. Fabric OS MIB Reference 53-1001156-01...
Page 399 fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 fcFxPortOperTable 1.3.6.1.3.42.2.1.2.1 A table that contains one entry for each Fx_Port in the fabric element, operational status, and parameters of the Fx_Ports. Fabric OS MIB Reference 53-1001156-01...
Page 400 fcFxPortOperEntry 1.3.6.1.3.42.2.1.2.1.1 fcFxPortOperEntry 1.3.6.1.3.42.2.1.2.1.1 An entry containing operational status and parameters of an Fx_Port. Index fcFxPortOperModuleIndex, fcFxPortOperFxPortIndex Fabric OS MIB Reference 53-1001156-01...
Page 401 fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.1 fcFxPortOperModuleIndex 1.3.6.1.3.42.2.1.2.1.1.1 Identifies the module containing the Fx_Port for which this entry contains information. Fabric OS MIB Reference 53-1001156-01...
Page 402 fcFxPortOperFxPortIndex 1.3.6.1.3.42.2.1.2.1.1.2 fcFxPortOperFxPortIndex 1.3.6.1.3.42.2.1.2.1.1.2 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized. Fabric OS MIB Reference 53-1001156-01...
Page 403 fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 fcFxPortID 1.3.6.1.3.42.2.1.2.1.1.3 The address identifier by which this Fx_Port is identified within the fabric. The Fx_Port might assign its address identifier to its attached Nx_Port(s) during fabric login. Fabric OS MIB Reference 53-1001156-01...
Page 404 fcFPortAttachedPortName 1.3.6.1.3.42.2.1.2.1.1.4 fcFPortAttachedPortName 1.3.6.1.3.42.2.1.2.1.1.4 The port name of the attached N_Port, if applicable. If the value of this object is ‘0000000000000000’H, this Fx_Port has no Nx_Port attached to it. This variable has been deprecated and might be implemented for backward compatibility. Fabric OS MIB Reference 53-1001156-01...
Page 405 fcFPortConnectedPort 1.3.6.1.3.42.2.1.2.1.1.5 fcFPortConnectedPort 1.3.6.1.3.42.2.1.2.1.1.5 The address identifier of the destination Fx_Port with which this Fx_Port is currently engaged in either a Class 1 or loop connection. If the value of this object is ‘000000’H, this Fx_Port is not engaged in a connection. This variable has been deprecated and might be implemented for backward compatibility.
Page 406 fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6 fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6 The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit. Fabric OS MIB Reference 53-1001156-01...
Page 407 fcFxPortOperMode 1.3.6.1.3.42.2.1.2.1.1.7 fcFxPortOperMode 1.3.6.1.3.42.2.1.2.1.1.7 The current operational mode of the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 408 fcFxPortAdminMode 1.3.6.1.3.42.2.1.2.1.1.8 fcFxPortAdminMode 1.3.6.1.3.42.2.1.2.1.1.8 The desired operational mode of the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 409 fcFxPortPhysTable 1.3.6.1.3.42.2.1.2.3 fcFxPortPhysTable 1.3.6.1.3.42.2.1.2.3 A table that contains, one entry for each Fx_Port in the fabric element, physical level status and parameters of the Fx_Ports. Fabric OS MIB Reference 53-1001156-01...
Page 410 fcFxPortPhysEntry 1.3.6.1.3.42.2.1.2.3.1 fcFxPortPhysEntry 1.3.6.1.3.42.2.1.2.3.1 An entry containing physical level status and parameters of an Fx_Port. Index fcFxPortPhysModuleIndex, fcFxPortPhysFxPortIndex Fabric OS MIB Reference 53-1001156-01...
Page 411 fcFxPortPhysModuleIndex 1.3.6.1.3.42.2.1.2.3.1.1 fcFxPortPhysModuleIndex 1.3.6.1.3.42.2.1.2.3.1.1 Identifies the module containing the Fx_Port for which this entry contains information. Fabric OS MIB Reference 53-1001156-01...
Page 412 fcFxPortPhysFxPortIndex 1.3.6.1.3.42.2.1.2.3.1.2 fcFxPortPhysFxPortIndex 1.3.6.1.3.42.2.1.2.3.1.2 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized. Fabric OS MIB Reference 53-1001156-01...
Page 413 fcFxPortPhysAdminStatus 1.3.6.1.3.42.2.1.2.3.1.3 fcFxPortPhysAdminStatus 1.3.6.1.3.42.2.1.2.3.1.3 The desired state of the Fx_Port: • online (1) Place port online • offline (2) Take port offline • testing (3) Initiate test procedures A management station might place the Fx_Port in a desired state by setting this object accordingly. The testing state (3) indicates that no operational frames can be passed.
Page 414 fcFxPortPhysOperStatus 1.3.6.1.3.42.2.1.2.3.1.4 fcFxPortPhysOperStatus 1.3.6.1.3.42.2.1.2.3.1.4 The current operational status of the Fx_Port: • online (1) Log in might proceed. • offline (2) Log in cannot proceed. • testing (3) Port is under test. • link-failure (4) Failure after online/testing. The testing state (3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2).
Page 415 fcFxPortPhysLastChange 1.3.6.1.3.42.2.1.2.3.1.5 fcFxPortPhysLastChange 1.3.6.1.3.42.2.1.2.3.1.5 The value of sysUpTime at the time the Fx_Port entered its current operational status. A value of 0 indicates that the Fx_Port’s operational status has not changed since the agent last restarted. Fabric OS MIB Reference 53-1001156-01...
Page 416 fcFxPortPhysRttov 1.3.6.1.3.42.2.1.2.3.1.6 fcFxPortPhysRttov 1.3.6.1.3.42.2.1.2.3.1.6 The Receiver_Transmitter_Timeout value of the Fx_Port. This is used by the receiver logic to detect Loss of Synchronization. Fabric OS MIB Reference 53-1001156-01...
Page 417 Fx_Port Fabric Login Table Fx_Port Fabric Login Table This table contains one entry for each Fx_Port in the fabric element, and the Service Parameters that have been established from the most recent fabric login, whether implicit or explicit. Fabric OS MIB Reference 53-1001156-01...
Page 418 fcFxlogiTable 1.3.6.1.3.42.2.1.2.4 fcFxlogiTable 1.3.6.1.3.42.2.1.2.4 A table that contains, one entry for each Fx_Port in the fabric element, services parameters established from the most recent fabric login, explicit or implicit. Fabric OS MIB Reference 53-1001156-01...
Page 419 fcFxlogiEntry 1.3.6.1.3.42.2.1.2.4.1 fcFxlogiEntry 1.3.6.1.3.42.2.1.2.4.1 An entry containing service parameters established from a successful fabric login. Index fcFxloginModuleIndex, fcFxloginFxPortIndex, fcFxloginNxPortIndex Fabric OS MIB Reference 53-1001156-01...
Page 420 fcFxlogiModuleIndex 1.3.6.1.3.42.2.1.2.4.1.1 fcFxlogiModuleIndex 1.3.6.1.3.42.2.1.2.4.1.1 Identifies the module containing the Fx_Port for which this entry contains information. Fabric OS MIB Reference 53-1001156-01...
Page 421 fcFxlogiFxPortIndex 1.3.6.1.3.42.2.1.2.4.1.2 fcFxlogiFxPortIndex 1.3.6.1.3.42.2.1.2.4.1.2 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized. Fabric OS MIB Reference 53-1001156-01...
Page 422 fcFxlogiNxPortIndex 1.3.6.1.3.42.2.1.2.4.1.3 fcFxlogiNxPortIndex 1.3.6.1.3.42.2.1.2.4.1.3 The object identifies the associated Nx_Port in the attachment for which the entry contains information. Fabric OS MIB Reference 53-1001156-01...
Page 423 fcFxPortFcphVersionAgreed 1.3.6.1.3.42.2.1.2.4.1.4 fcFxPortFcphVersionAgreed 1.3.6.1.3.42.2.1.2.4.1.4 The version of FC-PH that the Fx_Port has agreed to support from the fabric login. Fabric OS MIB Reference 53-1001156-01...
Page 424 fcFxPortNxPortBbCredit 1.3.6.1.3.42.2.1.2.4.1.5 fcFxPortNxPortBbCredit 1.3.6.1.3.42.2.1.2.4.1.5 The total number of buffers available for holding Class 1 connect-request Class 2 or Class 3 frames to be transmitted to the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from Fx_Port to Nx_Port. The buffer-to-buffer flow control mechanism is indicated in the respective fcFxPortBbCreditModel.
Page 425 fcFxPortNxPortRxDataFieldSize 1.3.6.1.3.42.2.1.2.4.1.6 fcFxPortNxPortRxDataFieldSize 1.3.6.1.3.42.2.1.2.4.1.6 The Receive Data Field Size of the attached Nx_Port. This is a binary value that specifies the largest Data Field Size for an FT_1 frame that can be received by the Nx_Port. The value is a number of bytes in the range 128 to 2112, inclusive.
Page 426 fcFxPortCosSuppAgreed 1.3.6.1.3.42.2.1.2.4.1.7 fcFxPortCosSuppAgreed 1.3.6.1.3.42.2.1.2.4.1.7 Indicates that the attached Nx_Port has requested the Fx_Port for the support of classes of services and the Fx_Port has granted the request. Fabric OS MIB Reference 53-1001156-01...
Page 427 fcFxPortIntermixSuppAgreed 1.3.6.1.3.42.2.1.2.4.1.8 fcFxPortIntermixSuppAgreed 1.3.6.1.3.42.2.1.2.4.1.8 A variable indicating that the attached Nx_Port has requested the Fx_Port for Intermix support and the Fx_Port has granted the request. This flag is only valid if Class 1 service is supported. Values Possible values are: •...
Page 428 fcFxPortStackedConnModeAgreed 1.3.6.1.3.42.2.1.2.4.1.9 fcFxPortStackedConnModeAgreed 1.3.6.1.3.42.2.1.2.4.1.9 Indicates whether the Fx_Port has agreed to support stacked connect from the fabric login. This is only meaningful if Class 1 service has been agreed to. Fabric OS MIB Reference 53-1001156-01...
Page 429 fcFxPortClass2SeqDelivAgreed 1.3.6.1.3.42.2.1.2.4.1.10 fcFxPortClass2SeqDelivAgreed 1.3.6.1.3.42.2.1.2.4.1.10 A variable indicating whether the Fx_Port has agreed to support Class 2 sequential delivery from the fabric login. This is only meaningful if Class 2 service has been agreed. Values Possible values are: • yes (1) •...
Page 430 fcFxPortClass3SeqDelivAgreed 1.3.6.1.3.42.2.1.2.4.1.11 fcFxPortClass3SeqDelivAgreed 1.3.6.1.3.42.2.1.2.4.1.11 A flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery from the fabric login. This is only meaningful if Class 3 service has been agreed to. Values Possible values are: • yes (1) •...
Page 431 fcFxPortNxPortName 1.3.6.1.3.42.2.1.2.4.1.12 fcFxPortNxPortName 1.3.6.1.3.42.2.1.2.4.1.12 The port name of the attached Nx_Port, if applicable. If the value of this object is ‘0000000000000000’H, this Fx_Port has no Nx_Port attached to it. Fabric OS MIB Reference 53-1001156-01...
Page 432 fcFxPortConnectedNxPort 1.3.6.1.3.42.2.1.2.4.1.13 fcFxPortConnectedNxPort 1.3.6.1.3.42.2.1.2.4.1.13 The address identifier of the destination Fx_Port with which this Fx_Port is currently engaged in either a Class 1 or loop connection. If the value of this object is ‘000000’H, this Fx_Port is not engaged in a connection. Fabric OS MIB Reference 53-1001156-01...
Page 433: Fcfeerror Group
fcFxPortBbCreditModel 1.3.6.1.3.42.2.1.2.4.1.14 fcFxPortBbCreditModel 1.3.6.1.3.42.2.1.2.4.1.14 Identifies the BB_Credit model used by the Fx_Port. The regular model refers to the buffer-to-buffer flow control mechanism defined in FC-PH [1] used between the F_Port and the N_Port. For FL_Ports, the alternate buffer-to-buffer flow control mechanism as defined in FC-AL [4] is used between the FL_Port and any attached NL_Ports.
Page 434 fcFxPortErrorTable 1.3.6.1.3.42.2.1.3.1 fcFxPortErrorTable 1.3.6.1.3.42.2.1.3.1 This table contains one entry for each Fx_Port in the fabric element, and counters recording numbers of errors detected since the management agent reinitialized. The first six columnar objects after the port index correspond to the counters in the Link ErrorStatus Block.
Page 435 fcFxPortErrorEntry 1.3.6.1.3.42.2.1.3.1.1 fcFxPortErrorEntry 1.3.6.1.3.42.2.1.3.1.1 An entry containing error counters of an Fx_Port. Index fcFxPortErrorModuleIndex, fcFxPortErrorFxPortIndex Fabric OS MIB Reference 53-1001156-01...
Page 436 fcFxPortErrorModuleIndex 1.3.6.1.3.42.2.1.3.1.1.1 fcFxPortErrorModuleIndex 1.3.6.1.3.42.2.1.3.1.1.1 Identifies the module containing the Fx_Port for which this entry contains information. Fabric OS MIB Reference 53-1001156-01...
Page 437 fcFxPortErrorFxPortIndex 1.3.6.1.3.42.2.1.3.1.1.2 fcFxPortErrorFxPortIndex 1.3.6.1.3.42.2.1.3.1.1.2 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized. Fabric OS MIB Reference 53-1001156-01...
Page 438 fcFxPortLinkFailures 1.3.6.1.3.42.2.1.3.1.1.3 fcFxPortLinkFailures 1.3.6.1.3.42.2.1.3.1.1.3 The number of link failures detected by this Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 439 fcFxPortSyncLosses 1.3.6.1.3.42.2.1.3.1.1.4 fcFxPortSyncLosses 1.3.6.1.3.42.2.1.3.1.1.4 The number of loss of synchronization errors detected by the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 440 fcFxPortSigLosses 1.3.6.1.3.42.2.1.3.1.1.5 fcFxPortSigLosses 1.3.6.1.3.42.2.1.3.1.1.5 The number of loss of signal errors detected by the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 441 fcFxPortPrimSeqProtoErrors 1.3.6.1.3.42.2.1.3.1.1.6 fcFxPortPrimSeqProtoErrors 1.3.6.1.3.42.2.1.3.1.1.6 The number of primitive sequence protocol errors detected by the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 442 fcFxPortInvalidTxWords 1.3.6.1.3.42.2.1.3.1.1.7 fcFxPortInvalidTxWords 1.3.6.1.3.42.2.1.3.1.1.7 The number of invalid transmission word errors detected by the Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 443 fcFxPortInvalidCrcs 1.3.6.1.3.42.2.1.3.1.1.8 fcFxPortInvalidCrcs 1.3.6.1.3.42.2.1.3.1.1.8 The number of invalid Cyclic Redundancy Checks (CRCs) detected by this Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 444 fcFxPortDelimiterErrors 1.3.6.1.3.42.2.1.3.1.1.9 fcFxPortDelimiterErrors 1.3.6.1.3.42.2.1.3.1.1.9 The number of Delimiter errors detected by this Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 445 fcFxPortAddressIdErrors 1.3.6.1.3.42.2.1.3.1.1.10 fcFxPortAddressIdErrors 1.3.6.1.3.42.2.1.3.1.1.10 The number of address identifier errors detected by this Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 446 fcFxPortLinkResetIns 1.3.6.1.3.42.2.1.3.1.1.11 fcFxPortLinkResetIns 1.3.6.1.3.42.2.1.3.1.1.11 The number of Link Reset Protocol errors received by this Fx_Port from the attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 447 fcFxPortLinkResetOuts 1.3.6.1.3.42.2.1.3.1.1.12 fcFxPortLinkResetOuts 1.3.6.1.3.42.2.1.3.1.1.12 The number of Link Reset Protocol errors issued by this Fx_Port to the attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 448 fcFxPortOlsIns 1.3.6.1.3.42.2.1.3.1.1.13 fcFxPortOlsIns 1.3.6.1.3.42.2.1.3.1.1.13 The number of Offline Sequence errors received by this Fx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 449: Fcfeacct Group
fcFxPortOlsOuts 1.3.6.1.3.42.2.1.3.1.1.14 fcFxPortOlsOuts 1.3.6.1.3.42.2.1.3.1.1.14 The number of Offline Sequence errors issued by this Fx_Port. fcFeAcct Group Brocade supports fcFxPortC2AccountingTable and fcFxPortC3AccountingTable. fcFeCap Group This group consists of a table describing information about what each Fx_Port is inherently capable of operating or supporting. A capability might be used or not, as expressed in its respective object value in the Configuration group.
Page 450 fcFxPortCapTable 1.3.6.1.3.42.2.1.5.1 fcFxPortCapTable 1.3.6.1.3.42.2.1.5.1 A table that contains one entry for each Fx_Port, and the capabilities of the port within the fabric element. Fabric OS MIB Reference 53-1001156-01...
Page 451 fcFxPortCapEntry 1.3.6.1.3.42.2.1.5.1.1 fcFxPortCapEntry 1.3.6.1.3.42.2.1.5.1.1 An entry containing the capabilities of a Fx_Port. Index fcFxPortCapModuleIndex, fcFxPortCapFxPortIndex Fabric OS MIB Reference 53-1001156-01...
Page 452 fcFxPortCapModuleIndex 1.3.6.1.3.42.2.1.5.1.1.1 fcFxPortCapModuleIndex 1.3.6.1.3.42.2.1.5.1.1.1 Identifies the module containing the Fx_Port for which this entry contains information. Fabric OS MIB Reference 53-1001156-01...
Page 453 fcFxPortCapFxPortIndex 1.3.6.1.3.42.2.1.5.1.1.2 fcFxPortCapFxPortIndex 1.3.6.1.3.42.2.1.5.1.1.2 Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is reinitialized. Fabric OS MIB Reference 53-1001156-01...
Page 454 fcFxPortCapFcphVersionHigh 1.3.6.1.3.42.2.1.5.1.1.3 fcFxPortCapFcphVersionHigh 1.3.6.1.3.42.2.1.5.1.1.3 The highest or most recent version of FC-PH that the Fx_Port is capable of supporting. Fabric OS MIB Reference 53-1001156-01...
Page 455 fcFxPortCapFcphVersionLow 1.3.6.1.3.42.2.1.5.1.1.4 fcFxPortCapFcphVersionLow 1.3.6.1.3.42.2.1.5.1.1.4 The lowest or earliest version of FC-PH that the Fx_Port is capable of supporting. Fabric OS MIB Reference 53-1001156-01...
Page 456 fcFxPortCapBbCreditMax 1.3.6.1.3.42.2.1.5.1.1.5 fcFxPortCapBbCreditMax 1.3.6.1.3.42.2.1.5.1.1.5 The maximum number of receive buffers available for holding Class 1 connect-request Class 2 or Class 3 frames from the attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 457 fcFxPortCapBbCreditMin 1.3.6.1.3.42.2.1.5.1.1.6 fcFxPortCapBbCreditMin 1.3.6.1.3.42.2.1.5.1.1.6 The minimum number of receive buffers available for holding Class 1 connect-request Class 2 or Class 3 frames from the attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 458 fcFxPortCapRxDataFieldSizeMax 1.3.6.1.3.42.2.1.5.1.1.7 fcFxPortCapRxDataFieldSizeMax 1.3.6.1.3.42.2.1.5.1.1.7 The maximum size (in bytes) of the Data Field in a frame that the Fx_Port is capable of receiving from its attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 459 fcFxPortCapRxDataFieldSizeMin 1.3.6.1.3.42.2.1.5.1.1.8 fcFxPortCapRxDataFieldSizeMin 1.3.6.1.3.42.2.1.5.1.1.8 The minimum size (in bytes) of the Data Field in a frame that the Fx_Port is capable of receiving from its attached Nx_Port. Fabric OS MIB Reference 53-1001156-01...
Page 460 fcFxPortCapCos 1.3.6.1.3.42.2.1.5.1.1.9 fcFxPortCapCos 1.3.6.1.3.42.2.1.5.1.1.9 A value indicating the set of Classes of Service that the Fx_Port is capable of supporting. Fabric OS MIB Reference 53-1001156-01...
Page 461 fcFxPortCapIntermix 1.3.6.1.3.42.2.1.5.1.1.10 fcFxPortCapIntermix 1.3.6.1.3.42.2.1.5.1.1.10 A flag indicating whether the Fx_Port is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 service.
Page 462 fcFxPortCapStackedConnMode 1.3.6.1.3.42.2.1.5.1.1.11 fcFxPortCapStackedConnMode 1.3.6.1.3.42.2.1.5.1.1.11 A value indicating the mode of Stacked Connect request that the Fx_Port is capable of supporting. Fabric OS MIB Reference 53-1001156-01...
Page 463 fcFxPortCapClass2SeqDeliv 1.3.6.1.3.42.2.1.5.1.1.12 fcFxPortCapClass2SeqDeliv 1.3.6.1.3.42.2.1.5.1.1.12 A flag indicating whether the Fx_Port is capable of supporting Class 2 Sequential Delivery. Values Possible values are: • yes (1) • no (2) Fabric OS MIB Reference 53-1001156-01...
Page 464 fcFxPortCapClass3SeqDeliv 1.3.6.1.3.42.2.1.5.1.1.13 fcFxPortCapClass3SeqDeliv 1.3.6.1.3.42.2.1.5.1.1.13 A flag indicating whether the Fx_Port is capable of supporting Class 3 Sequential Delivery. Values Possible values are: • yes (1) • no (2) Fabric OS MIB Reference 53-1001156-01...
Page 465 fcFxPortCapHoldTimeMax 1.3.6.1.3.42.2.1.5.1.1.14 fcFxPortCapHoldTimeMax 1.3.6.1.3.42.2.1.5.1.1.14 The maximum holding time (in microseconds) that the Fx_Port is capable of supporting. Fabric OS MIB Reference 53-1001156-01...
Page 466 fcFxPortCapHoldTimeMin 1.3.6.1.3.42.2.1.5.1.1.15 fcFxPortCapHoldTimeMin 1.3.6.1.3.42.2.1.5.1.1.15 The minimum holding time (in microseconds) that the Fx_Port is capable of supporting. Fabric OS MIB Reference 53-1001156-01...
Page 467 fcFxPortCapBaudRates 1.3.6.1.3.42.2.1.5.1.1.16 fcFxPortCapBaudRates 1.3.6.1.3.42.2.1.5.1.1.16 A value indicating the set of baud rates that the Fx_Port is capable of supporting. This variable has been deprecated and might be implemented for backward compatibility. Fabric OS MIB Reference 53-1001156-01...
Page 468 fcFxPortCapMedia 1.3.6.1.3.42.2.1.5.1.1.17 fcFxPortCapMedia 1.3.6.1.3.42.2.1.5.1.1.17 A value indicating the set of media that the Fx_Port is capable of supporting. This variable has been deprecated and might be implemented for backward compatibility. Fabric OS MIB Reference 53-1001156-01...
Page 469: Entity Mib Overview
Chapter Entity MIB Objects This chapter provides descriptions and other information specific to Entity MIB object types and includes the following information: • Entity MIB Overview..........453 •...
Page 470: Entity Mib System Organization Of Mib Objects
Entity MIB Overview Entity MIB System Organization of MIB Objects Figure 29 through Figure 36 depict the organization and structure of the Entity MIB file system. - iso - org - dod - internet - mgmt - mib-2 - entityMIB - entityMIBObjects - entityPhysical - entityLogical...
Page 471: Definitions For Entity Mib
Entity MIB Overview - entityMapping entLPMappingTable 1.3.6.1.2.1.47.1.3.1 entLPMappingEntry 1.3.6.1.2.1.47.1.3.1.1 entLPPhysicalIndex 1.3.6.1.2.1.47.1.3.1.1.1 entAliasMappingTable 1.3.6.1.2.1.47.1.3.2 entAliasMappingEntry 1.3.6.1.2.1.47.1.3.2.1 entAliasLogicalIndexOrZero 1.3.6.1.2.1.47.1.3.2.1.1 entAliasMappingIdentifier 1.3.6.1.2.1.47.1.3.2.1.2 entPhysicalContainsTable 1.3.6.1.2.1.47.1.3.3 entPhysicalContainsEntry 1.3.6.1.2.1.47.1.3.3.1 entPhysicalChildIndex 1.3.6.1.2.1.47.1.3.3.1.1 FIGURE 32 entityMapping Hierarchy - entityGeneral entLastChangeTime 1.3.6.1.2.1.47.1.4.1 FIGURE 33 entityGeneral Hierarchy - entityMIBTraps - entityMIBTrapPrefix (1.3.6.1.2.1.47.2.0) entConfigChange 1.3.6.1.2.1.47.2.0.1 FIGURE 34 entityMIBTrapPrefix Hierarchy...
Page 472 Entity MIB Overview TABLE 9 Objects Imported into the Entity MIB (Continued) Object Imported from this module TDomain SNMPv2-TC TAddress TEXTUAL-CONVENTION AutonomousType RowPointer TimeStamp TruthValue MODULE-COMPLIANCE SNMPv2-CONF OBJECT-GROUP NOTIFICATION-GROUP SnmpAdminString SNMP-FRAMEWORK-MIB Fabric OS MIB Reference 53-1001156-01...
Page 473: Textual Conventions
Textual Conventions Textual Conventions PhysicalIndex Arbitrary value that uniquely identifies the physical entity. Value should be a small positive integer; index values for different physical entities are not necessarily contiguous. Syntax Integer (1... 2147483647) Fabric OS MIB Reference 53-1001156-01...
Page 474 PhysicalClass PhysicalClass An enumerated value that provides an indication of the general hardware type of a particular physical entity. There are no restrictions as to the number of entPhysicalEntries of each entPhysicalClass, which must be instantiated by an agent. Syntax Integer TABLE 10 Possible Values for PhysicalClass...
Page 475: Entity Mib Objects
SnmpEngineIdOrNone SnmpEngineIdOrNone A specially formatted SnmpEngineID string for use with the Entity MIB. If an instance of an object with syntax SnmpEngineIdOrNone has a non-zero length, then the object encoding and semantics are defined by the SnmpEngineID textual convention (Refer to RFC 2571 [RFC2571]).
Page 476: Physical Entity Group
Physical Entity Group Physical Entity Group entPhysicalTable 1.3.6.1.2.1.47.1.1.1 This table contains one row per physical entity ( Figure 36). The table always contains at least one row for an “overall” physical entity. This object is implemented for Fabric OS v6.2.0. The “overall” physical entry for Brocade is the chassis, and in Fabric OS v6.2.0 it is marked as a FRU.
Page 477 entPhysicalTable 1.3.6.1.2.1.47.1.1.1 TABLE 11 entPhysicalTable Entries for Brocade Switches Platform Blades Fans Power Supply WWN Card Brocade 5100 1 blade 2 fans 2 PS 1 WWN unit. Not a FRU. Brocade 5300 1 blade 3 fans 2 PS 1 WWN unit. Not a FRU.
Page 478 entPhysicalEntry 1.3.6.1.2.1.47.1.1.1.1 entPhysicalEntry 1.3.6.1.2.1.47.1.1.1.1 Information about a particular physical entity. Each entry provides objects (entPhysicalDescr, entPhysicalVendorType, and entPhysicalClass) to help an NMS identify and characterize the entry, and objects (entPhysicalContainedIn and entPhysicalParentRelPos) to help an NMS relate the particular entry to other entries in this table. Index 1: entPhysicalIndex Fabric OS MIB Reference...
Page 479 entPhysicalIndex 1.3.6.1.2.1.47.1.1.1.1.1 entPhysicalIndex 1.3.6.1.2.1.47.1.1.1.1.1 The index for this entry. This object is not accessible. Fabric OS MIB Reference 53-1001156-01...
Page 480 entPhysicalDescr 1.3.6.1.2.1.47.1.1.1.1.2 entPhysicalDescr 1.3.6.1.2.1.47.1.1.1.1.2 A textual description of the physical entity (physical name of the entity, such as chassis, blade, port, and so on). This object should contain a string that identifies the entity manufacturer’s name and should be set to a distinct value for each version or model of the physical entity. The name provides the entity type and number (for example, slot 1, power supply, and so on).
Page 481 entPhysicalVendorType 1.3.6.1.2.1.47.1.1.1.1.3 entPhysicalVendorType 1.3.6.1.2.1.47.1.1.1.1.3 An indication of the vendor-specific hardware type of the physical entity. Note that this is different from the definition of MIB-II sysObjectID. An agent should set this object to an enterprise-specific registration identifier value, indicating the specific equipment type in detail.
Page 482 entPhysicalContainedIn 1.3.6.1.2.1.47.1.1.1.1.4 entPhysicalContainedIn 1.3.6.1.2.1.47.1.1.1.1.4 The value of entPhysicalIndex for the physical entity that “contains” this physical entity. A value of 0 indicates this physical entity is not contained in any other physical entity. Note that the set of containment relationships define a strict hierarchy; that is, recursion is not allowed. In the event a physical entity is contained by more than one physical entity (for example, double-wide modules), this object should identify the containing entity with the lowest value of entPhysicalIndex.
Page 483 entPhysicalClass 1.3.6.1.2.1.47.1.1.1.1.5 entPhysicalClass 1.3.6.1.2.1.47.1.1.1.1.5 An indication of the general hardware type of the physical entity. An agent should set this object to the standard enumeration value that most accurately indicates the general class of the physical entity, or the primary class if there is more than one. If no appropriate standard registration identifier exists for this physical entity, then the value is returned.
Page 484 entPhysicalClass 1.3.6.1.2.1.47.1.1.1.1.5 • Module: One entry for switch blade, up to two entries for power supplies, and up to six entries for fans. Brocade 4100 switches can have the following hierarchy of physical objects: • Chassis: One entry (one row) •...
Page 485 entPhysicalParentRelPos 1.3.6.1.2.1.47.1.1.1.1.6 entPhysicalParentRelPos 1.3.6.1.2.1.47.1.1.1.1.6 An indication of the relative position of this child component among all its sibling components. Sibling components are defined as entPhysicalEntries that share the same instance values of each of the entPhysicalContainedIn and entPhysicalClass objects. For chassis entry, this value is -1; for containers, it is the sequential number of the container from the first one;...
Page 486 entPhysicalName 1.3.6.1.2.1.47.1.1.1.1.7 entPhysicalName 1.3.6.1.2.1.47.1.1.1.1.7 The textual name of the physical entity (physical name of the entity such as chassis, blade, port, and so on). The value of this object should be the name of the component as assigned by the local device and should be suitable for use in commands entered at the device’s “console.”...
Page 487 entPhysicalHardwareRev 1.3.6.1.2.1.47.1.1.1.1.8 entPhysicalHardwareRev 1.3.6.1.2.1.47.1.1.1.1.8 The vendor-specific hardware revision string for the physical entity. The preferred value is the hardware revision identifier actually printed on the component itself (if present). Note that if revision information is stored internally in a nonprintable (for example, binary) format, then the agent must convert such information to a printable format, in an implementation-specific manner.
Page 488 entPhysicalFirmwareRev 1.3.6.1.2.1.47.1.1.1.1.9 entPhysicalFirmwareRev 1.3.6.1.2.1.47.1.1.1.1.9 The vendor-specific firmware revision string for the physical entity. Note that if revision information is stored internally in a nonprintable (for example, binary) format, then the agent must convert such information to a printable format, in an implementation-specific manner.
Page 489 entPhysicalSoftwareRev 1.3.6.1.2.1.47.1.1.1.1.10 entPhysicalSoftwareRev 1.3.6.1.2.1.47.1.1.1.1.10 The vendor-specific software revision string for the physical entity. Note that if revision information is stored internally in a nonprintable (for example, binary) format, then the agent must convert such information to a printable format, in an implementation-specific manner.
Page 490 entPhysicalSerialNum 1.3.6.1.2.1.47.1.1.1.1.11 entPhysicalSerialNum 1.3.6.1.2.1.47.1.1.1.1.11 The vendor-specific serial number string for the physical entity. The preferred value is the serial number actually printed on the component (if present). On the first instantiation of a physical entity, the value of entPhysicalSerialNum associated with that entity is set to the correct vendor-assigned serial number, if this information is available to the agent.
Page 491 entPhysicalMfgName 1.3.6.1.2.1.47.1.1.1.1.12 entPhysicalMfgName 1.3.6.1.2.1.47.1.1.1.1.12 The name of the manufacturer of this physical component. The preferred value is the name actually printed on the component (if present). Note that comparisons between instances of the entPhysicalModelName, entPhysicalFirmwareRev, entPhysicalSoftwareRev, and the entPhysicalSerialNum objects are meaningful only amongst entPhysicalEntries with the same value of entPhysicalMfgName.
Page 492 entPhysicalModelName 1.3.6.1.2.1.47.1.1.1.1.13 entPhysicalModelName 1.3.6.1.2.1.47.1.1.1.1.13 The vendor-specific model name associated with this physical component. The preferred value is the customer-visible part number, which might be printed on the component. If the model name string associated with the physical component is unknown to the agent, then this object contains a zero-length string.
Page 493 entPhysicalAlias 1.3.6.1.2.1.47.1.1.1.1.14 entPhysicalAlias 1.3.6.1.2.1.47.1.1.1.1.14 This object is an alias name for the physical entity as specified by a network manager; it provides a nonvolatile handle for the physical entity. On the first instantiation of a physical entity, the value of entPhysicalAlias associated with that entity is set to the zero-length string.
Page 494 entPhysicalAssetID 1.3.6.1.2.1.47.1.1.1.1.15 entPhysicalAssetID 1.3.6.1.2.1.47.1.1.1.1.15 This object is a user-assigned asset tracking identifier for the physical entity as specified by a network manager; it provides nonvolatile storage of this information. On the first instantiation of a physical entity, the value of entPhysicalAssetID associated with that entity is set to the zero-length string.
Page 495 entPhysicalIsFRU 1.3.6.1.2.1.47.1.1.1.1.16 entPhysicalIsFRU 1.3.6.1.2.1.47.1.1.1.1.16 The entPhysicalIsFRU object indicates whether this physical entity is considered a field replaceable unit by the vendor. If this object contains the value “true(1),” then this entPhysicalEntry identifies a field replaceable unit. For all entPhysicalEntries representing components that are permanently contained within a field replaceable unit, the value “false(2)”...
Page 496: Logical Entity Group
Logical Entity Group Logical Entity Group entLogicalTable 1.3.6.1.2.1.47.1.2.1 This table contains one row per logical entity. For agents that implement more than one naming scope, at least one entry must exist. Agents that instantiate all MIB objects within a single naming scope are not required to implement this table.
Page 497 entLogicalEntry 1.3.6.1.2.1.47.1.2.1.1 entLogicalEntry 1.3.6.1.2.1.47.1.2.1.1 Information about a particular logical entity. Entities might be managed by this agent or other SNMP agents in the same chassis. Index entLogicalIndex Fabric OS MIB Reference 53-1001156-01...
Page 498 entLogicalIndex 1.3.6.1.2.1.47.1.2.1.1.1 entLogicalIndex 1.3.6.1.2.1.47.1.2.1.1.1 The value of this object uniquely identifies the logical entity. The value should be a small positive integer; index values for different logical entities are not necessarily contiguous. Fabric OS MIB Reference 53-1001156-01...
Page 499 entLogicalDescr 1.3.6.1.2.1.47.1.2.1.1.2 entLogicalDescr 1.3.6.1.2.1.47.1.2.1.1.2 A textual description of the logical entity. This object should contain a string that identifies the manufacturer’s name for the logical entity and should be set to a distinct value for each version of the logical entity. Fabric OS MIB Reference 53-1001156-01...
Page 500 entLogicalType 1.3.6.1.2.1.47.1.2.1.1.3 entLogicalType 1.3.6.1.2.1.47.1.2.1.1.3 An indication of the type of logical entity. This is typically the Object Identifier name of the node in the SMI’s naming hierarchy that represents the major MIB module, or the majority of the MIB modules, supported by the logical entity. •...
Page 501 entLogicalCommunity 1.3.6.1.2.1.47.1.2.1.1.4 entLogicalCommunity 1.3.6.1.2.1.47.1.2.1.1.4 An SNMPv1 or SNMPv2C community string, which can be used to access detailed management information for this logical entity. The agent should allow read access with this community string (to an appropriate subset of all managed objects) and might also return a community string based on the privileges of the request used to read this object.
Page 502 entLogicalTAddress 1.3.6.1.2.1.47.1.2.1.1.5 entLogicalTAddress 1.3.6.1.2.1.47.1.2.1.1.5 The transport service address by which the logical entity receives network management traffic, formatted according to the corresponding value of entLogicalTDomain. For snmpUDPDomain, a TAddress is 6 octets long, the initial 4 octets containing the IP-address in network-byte order and the last 2 containing the UDP port in network-byte order.
Page 503 entLogicalTDomain 1.3.6.1.2.1.47.1.2.1.1.6 entLogicalTDomain 1.3.6.1.2.1.47.1.2.1.1.6 Indicates the kind of transport service by which the logical entity receives network management traffic. Possible values for this object are currently found in the Transport Mappings for SNMPv2 document (RFC1906). Fabric OS MIB Reference 53-1001156-01...
Page 504 entLogicalContextEngineID 1.3.6.1.2.1.47.1.2.1.1.7 entLogicalContextEngineID 1.3.6.1.2.1.47.1.2.1.1.7 The authoritative contextEngineID that can be used to send an SNMP message concerning information held by this logical entity to the address specified by the associated entLogicalTAddress/entLogicalTDomain pair. This object, together with the associated entLogicalContextName object, defines the context associated with a particular logical entity;...
Page 505 entLogicalContextName 1.3.6.1.2.1.47.1.2.1.1.8 entLogicalContextName 1.3.6.1.2.1.47.1.2.1.1.8 The contextName that can be used to send an SNMP message concerning information held by this logical entity to the address specified by the associated entLogicalTAddress/entLogicalTDomain pair. This object, together with the associated entLogicalContextEngineID object, defines the context associated with a particular logical entity and allows access to SNMP engines identified by a contextEngineId and contextName pair.
Page 506: Entity Mapping Group
Entity Mapping Group Entity Mapping Group entLPMappingTable 1.3.6.1.2.1.47.1.3.1 This table contains zero or more rows of logical entity to physical equipment associations. For each logical entity known by this agent, there are zero or more mappings to the physical resources used to realize that logical entity.
Page 507 entLPMappingEntry 1.3.6.1.2.1.47.1.3.1.1 entLPMappingEntry 1.3.6.1.2.1.47.1.3.1.1 Information about a particular logical entity to physical equipment association. Note that the nature of the association is not specifically identified in this entry. It is expected that sufficient information exists in the MIBs used to manage a particular logical entity to infer how physical component information is utilized.
Page 508 entLPPhysicalIndex 1.3.6.1.2.1.47.1.3.1.1.1 entLPPhysicalIndex 1.3.6.1.2.1.47.1.3.1.1.1 The value of this object identifies the index value of a particular entPhysicalEntry associated with the indicated entLogicalEntity. Fabric OS MIB Reference 53-1001156-01...
Page 509 entAliasMappingTable 1.3.6.1.2.1.47.1.3.2 entAliasMappingTable 1.3.6.1.2.1.47.1.3.2 This table contains zero or more rows, representing mappings of logical entity and physical component to external MIB identifiers. Each physical port in the system might be associated with a mapping to an external identifier, which itself is associated with a particular logical entity’s naming scope.
Page 510 entAliasMappingEntry 1.3.6.1.2.1.47.1.3.2.1 entAliasMappingEntry 1.3.6.1.2.1.47.1.3.2.1 Information about a particular physical equipment, logical entity to external identifier binding. Each logical entity/physical component pair might be associated with one alias mapping. The logical entity index might also be used as a wildcard (Refer to “entAliasLogicalIndexOrZero 1.3.6.1.2.1.47.1.3.2.1.1”...
Page 511 entAliasLogicalIndexOrZero 1.3.6.1.2.1.47.1.3.2.1.1 entAliasLogicalIndexOrZero 1.3.6.1.2.1.47.1.3.2.1.1 The value of this object identifies the logical entity that defines the naming scope for the associated instance of the entAliasMappingIdentifier object. If this object has a nonzero value, then it identifies the logical entity named by the same value of entLogicalIndex.
Page 512 entAliasMappingIdentifier 1.3.6.1.2.1.47.1.3.2.1.2 entAliasMappingIdentifier 1.3.6.1.2.1.47.1.3.2.1.2 The value of this object identifies a particular conceptual row associated with the indicated entPhysicalIndex and entLogicalIndex pair. Since only physical ports are modeled in this table, only entries that represent interfaces or ports are allowed. If an ifEntry exists on behalf of a particular physical port, then this object should identify the associated ifEntry.
Page 513 entPhysicalContainsTable 1.3.6.1.2.1.47.1.3.3 entPhysicalContainsTable 1.3.6.1.2.1.47.1.3.3 A table that exposes the container/containee relationships between physical entities. This table provides all the information found by constructing the virtual containment tree for a given entPhysicalTable, but in a more direct format. In the event a physical entity is contained by more than one other physical entity (for example, double-wide modules), this table should include these additional mappings, which cannot be represented in the entPhysicalTable virtual containment tree.
Page 514 entPhysicalContainsEntry 1.3.6.1.2.1.47.1.3.3.1 entPhysicalContainsEntry 1.3.6.1.2.1.47.1.3.3.1 A single container / containee relationship. Indexes 1: entPhysicalIndex 2: entPhysicalChildIndex Fabric OS MIB Reference 53-1001156-01...
Page 515 entPhysicalChildIndex 1.3.6.1.2.1.47.1.3.3.1.1 entPhysicalChildIndex 1.3.6.1.2.1.47.1.3.3.1.1 The value of entPhysicalIndex for the contained physical entity. Fabric OS MIB Reference 53-1001156-01...
Page 516: General Group
General Group General Group entLastChangeTime 1.3.6.1.2.1.47.1.4.1 The value of sysUpTime at the time a conceptual row is created, modified, or deleted in any of the following tables: • entPhysicalTable • entLogicalTable • entLPMappingTable • entAliasMappingTable • entPhysicalContainsTable Fabric OS MIB Reference 53-1001156-01...
Page 517: Entity Mib Trap
Entity MIB Trap Entity MIB Trap This section lists the entityMIBTrap objects. entConfigChange 1.3.6.1.2.1.47.2.0.1 An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent should not generate more than one entConfigChange notification event in a given time interval (five seconds is the suggested default).
Page 518: Entity Mib Conformance Information
Entity MIB Conformance Information Entity MIB Conformance Information This section lists the entityConformance MIBs. Figure 35 on page 455 shows the structure of the entityConformance group. entityCompliance 1.3.6.1.2.1.47.3.1.1 The compliance statement for SNMP entities that implement version 1 of the Entity MIB. Status Deprecated Mandatory...
Page 519 entity2Compliance 1.3.6.1.2.1.47.3.1.2 entity2Compliance 1.3.6.1.2.1.47.3.1.2 The compliance statement for SNMP entities that implement version 2 of the Entity MIB. Mandatory 1: entityPhysicalGroup Groups 2: entityPhysical2Group 3: entityGeneralGroup 4: entityNotificationsGroup Components 1. Type: Group Group: entityLogical2Group Description: Implementation of this group is not mandatory for agents which model all MIB object instances within a single naming scope.
Page 520 entityPhysicalGroup 1.3.6.1.2.1.47.3.2.1 entityPhysicalGroup 1.3.6.1.2.1.47.3.2.1 The collection of objects used to represent physical system components, for which a single agent provides management information. Objects 1: entPhysicalDescr 2: entPhysicalVendorType 3: entPhysicalContainedIn 4: entPhysicalClass 5: entPhysicalParentRelPos 6: entPhysicalName Fabric OS MIB Reference 53-1001156-01...
Page 521 entityLogicalGroup 1.3.6.1.2.1.47.3.2.2 entityLogicalGroup 1.3.6.1.2.1.47.3.2.2 The collection of objects used to represent the list of logical entities, for which a single agent provides management information. Objects 1: entLogicalDescr 2: entLogicalType 3: entLogicalCommunity 4: entLogicalTAddress 5: entLogicalTDomain Status Deprecated Fabric OS MIB Reference 53-1001156-01...
Page 522 entityMappingGroup 1.3.6.1.2.1.47.3.2.3 entityMappingGroup 1.3.6.1.2.1.47.3.2.3 The collection of objects used to represent the associations between multiple logical entities, physical components, interfaces, and port identifiers, for which a single agent provides management information. Objects 1: entLPPhysicalIndex 2: entAliasMappingIdentifier 3: entPhysicalChildIndex Fabric OS MIB Reference 53-1001156-01...
Page 523 entityGeneralGroup 1.3.6.1.2.1.47.3.2.4 entityGeneralGroup 1.3.6.1.2.1.47.3.2.4 The collection of objects that are used to represent general entity information for which a single agent provides management information. Objects 1: entLastChangeTime Fabric OS MIB Reference 53-1001156-01...
Page 524 entityNotificationsGroup 1.3.6.1.2.1.47.3.2.5 entityNotificationsGroup 1.3.6.1.2.1.47.3.2.5 The collection of notifications used to indicate Entity MIB data consistency and general status information. Notifications 1: entConfigChange Fabric OS MIB Reference 53-1001156-01...
Page 525 entityPhysical2Group 1.3.6.1.2.1.47.3.2.6 entityPhysical2Group 1.3.6.1.2.1.47.3.2.6 The collection of objects used to represent physical system components, for which a single agent provides management information. This group augments the objects contained in the entityPhysicalGroup. Objects 1: entPhysicalHardwareRev 2: entPhysicalFirmwareRev 3: entPhysicalSoftwareRev 4: entPhysicalSerialNum 5: entPhysicalMfgName 6: entPhysicalModelName 7: entPhysicalAlias...
Page 526 entityLogical2Group 1.3.6.1.2.1.47.3.2.7 entityLogical2Group 1.3.6.1.2.1.47.3.2.7 The collection of objects used to represent the list of logical entities, for which a single SNMP entity provides management information. Objects 1: entLogicalDescr 2: entLogicalType 3: entLogicalTAddress 4: entLogicalTDomain 5: entLogicalContextEngineID 6: entLogicalContextName Fabric OS MIB Reference 53-1001156-01...
Page 527: Sw Mib Overview
Chapter SW-MIB Objects This chapter contains descriptions and other information specific to FC Switch MIB (SW-MIB) object types. This chapter provides information on: • SW MIB Overview..........511 •...
Page 528 SW MIB Overview - swAgtCfg - swFCport - swNs - swEvent - swFwSystem - swEndDevice - swGroup - swBlmPerfMnt - swTrunk - sw28k - sw21kN24k - sw20x0 - bsciReg - bsciModules - sw21kN24k - sw20x0 FIGURE 37 SW-MIB Overall Tree Structure - swTrapsV2 swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1 swSensorScn 1.3.6.1.4.1.1588.2.1.1.1.0.2...
Page 529 SW MIB Overview - swSystem swCurrentDate 1.3.6.1.4.1.1588.2.1.1.1.1.1 swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6 swOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.7 swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 swTelnetShellAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.9 swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10 swFlashDLOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.11 swFlashDLAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.12 swFlashDLHost 1.3.6.1.4.1.1588.2.1.1.1.1.13 swFlashDLUser 1.3.6.1.4.1.1588.2.1.1.1.1.14 swFlashDLFile 1.3.6.1.4.1.1588.2.1.1.1.1.15 swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 swBeaconOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.18 swBeaconAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.19 swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20 swNumSensors 1.3.6.1.4.1.1588.2.1.1.1.1.21 swSensorTable 1.3.6.1.4.1.1588.2.1.1.1.1.22...
Page 530 SW MIB Overview - swFabric swDomainID 1.3.6.1.4.1.1588.2.1.1.1.2.1 swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 swNumNbs 1.3.6.1.4.1.1588.2.1.1.1.2.8 swVfId 1.3.6.1.4.1.1588.2.1.1.1.2.9 swNbTable 1.3.6.1.4.1.1588.2.1.1.1.2.10 swNbEntry 1.3.6.1.4.1.1588.2.1.1.1.2.10.1 swNbIndex 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.1 swNbMyPort 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.2 swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.3 swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.4 swNbBaudRate 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.5 swNbIslState 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.6 swNbIslCost 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.7 swNbRemPortName 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.8 swFabricMemTable 1.3.6.1.4.1.1588.2.1.1.1.2.11 swFabricMemEntry 1.3.6.1.4.1.1588.2.1.1.1.2.11.1 swFabricMemWwn 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.1 swFabricMemDid 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.2 swFabricMemName 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.3 swFabricMemEIP 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.4 swFabricMemFCIP 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.5...
Page 531 SW MIB Overview - swFCport (1.3.6.1.4.1.1588.2.1.1.1.6) swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.2 swFCPortEntry 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 swFCPortTxType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7 swFCPortTxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 swFCPortRxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12 swFCPortTxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13 swFCPortRxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14 swFCPortRxC2Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 swFCPortRxC3Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 swFCPortRxLCs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17 swFCPortRxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.18 swFCPortTooManyRdys 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.19 swFCPortNoTxCredits 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.20...
Page 532 SW MIB Overview - swNs swNsLocalNumEntry 1.3.6.1.4.1.1588.2.1.1.1.7.1 swNsLocalTable 1.3.6.1.4.1.1588.2.1.1.1.7.2 swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2 swNsPortType 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.3 swNsPortName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.4 swNsPortSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.5 swNsNodeName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.6 swNsNodeSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.7 swNsIPA 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.8 swNsIpAddress 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.9 swNsCos 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.10 swNsFc4 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.11 swNsIpNxPort 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.12 swNsWwn 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.13 swNsHardAddr 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.14 FIGURE 44 swNs Hierarchy - swEvent swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1.8.1...
Page 533 SW MIB Overview - swFwSystem swFwFabricWatchLicense 1.3.6.1.4.1.1588.2.1.1.1.10.1 swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.2 swFwClassAreaEntry 1.3.6.1.4.1.1588.2.1.1.1.10.2.1 swFwClassAreaIndex 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 swFwDefaultUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3 swFwDefaultTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 swFwDefaultLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.5 swFwDefaultHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.6 swFwDefaultBufSize 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.7 swFwCustUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.8 swFwCustTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.9 swFwCustLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.10 swFwCustHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.11 swFwCustBufSize 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.12 swFwThLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.13 swFwWriteActVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.14 swFwDefaultChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.15 swFwDefaultExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.16 swFwDefaultBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.17 swFwDefaultAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.18...
Page 534 SW MIB Overview - swEndDevice swEndDeviceRlsTable 1.3.6.1.4.1.1588.2.1.1.1.21.1 swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.21.1.1 swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2 swEndDevicePortID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3 swEndDeviceLinkFailure 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4 swEndDeviceSyncLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5 swEndDeviceSigLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6 swEndDeviceProtoErr 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.7 swEndDeviceInvalidWord 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.8 swEndDeviceInvalidCRC 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.9 FIGURE 47 swEndDevice Hierarchy - swGroup swGroupTable 1.3.6.1.4.1.1588.2.1.1.1.22.1 swGroupEntry 1.3.6.1.4.1.1588.2.1.1.1.22.1.1 swGroupIndex 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.1 swGroupName 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.2 swGroupType 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.3 swGroupMemTable 1.3.6.1.4.1.1588.2.1.1.1.22.2 swGroupMemEntry 1.3.6.1.4.1.1588.2.1.1.1.22.2.1...
Page 535: Textual Conventions For Sw-Mib
SW MIB Overview - swTrunk swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1 swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 swTrunkMaster 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.3 swPortTrunked 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.4 swTrunkGrpTable 1.3.6.1.4.1.1588.2.1.1.1.24.3 swTrunkGrpEntry 1.3.6.1.4.1.1588.2.1.1.1.24.3.1 swTrunkGrpNumber 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.1 swTrunkGrpMaster 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.2 swTrunkGrpTx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.3 swTrunkGrpRx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.4 FIGURE 50 swTrunk Hierarchy - swTopTalker swTopTalkerMntMode 1.3.6.1.4.1.1588.2.1.1.1.25.1 swTopTalkerMntNumEntries 1.3.6.1.4.1.1588.2.1.1.1.25.2 swTopTalkerMntTable 1.3.6.1.4.1.1588.2.1.1.1.25.3 swTopTalkerMntEntry 1.3.6.1.4.1.1588.2.1.1.1.25.3.1 swTopTalkerMntIndex 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.1...
Page 536 SW MIB Overview TABLE 12 SW-MIB Textual Conventions (Continued) Type Definition Value Description SwFwActs Integer Valid action matrix: 0 swFwNoAction 1 swFwErrlog 2 swFwSnmptrap 3 swFwErrlogSnmptrap 4 swFwPortloglock 5 swFwErrlogPortloglock 6 swFwSnmptrapPortloglock 7 swFwErrlogSnmptrapPortloglock 8 swFwRn 9 swFwElRn 10 swFwStRn 11 swFwElStRn 12 swFwPlRn 13 swFwElPlRn...
Page 537 SW MIB Overview TABLE 12 SW-MIB Textual Conventions (Continued) Type Definition Value Description SwFwClassesAreas Integer Classes and area index: 1 swFwEnvTemp 46 swFwFOPPortPe 2 swFwEnvFan 47 swFwFOPPortWords 3 swFwEnvPs 48 swFwFOPPortCrcs 4 swFwTransceiverTemp 49 swFwFOPPortRXPerf 5 swFwTransceiverRxp 50 swFwFOPPortTXPerf 6 swFwTransceiverTxp 51 swFwFOPPortState 7 swFwTransceiverCurrent 52 swFwPerfALPACRC...
Page 538: Sw Traps
sw Traps TABLE 12 SW-MIB Textual Conventions (Continued) Type Definition Value Description SwFwEvent Integer Possible events available: 1 started 2 changed 3 exceeded 4 below 5 above 6 inBetween SwFwBehavior Integer Behavior type for thresholds: 1 triggered 2 continuous SwFwState Integer State type for last events: 1 swFwInformative...
Page 539 sw Traps Refer to Table 13 for the six traps defined in the SW.MIB, when it occurs, and how to configure the trap, if possible. TABLE 13 SW MIB Traps Name Specific When Configure “swFault During boot, if diagnostics fail N.A.
Page 540 swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1 swFault 1.3.6.1.4.1.1588.2.1.1.1.0.1 This trap is no longer generated. Enterprise Variables “swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10” A swFault is generated whenever the diagnostics detect a fault with the switch. #TYPE Switch is faulty. #SUMMARY Faulty reason: %d and SSN is #%s #ARGUMENTS 0, 1 #SEVERITY...
Page 541 swSensorScn 1.3.6.1.4.1.1588.2.1.1.1.0.2 swSensorScn 1.3.6.1.4.1.1588.2.1.1.1.0.2 (Obsoleted by swFabricWatchTrap) Enterprise Variables “swSensorStatus 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3” “swSensorIndex 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1” “swSensorType 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2” “swSensorValue 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4” “swSensorInfo 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10” A swSensorScn (2) is generated whenever an environment sensor changes its operational state: for instance, if a fan stop working. The VarBind in the Trap Data Unit contain the corresponding instance of the sensor status, sensor index, sensor type, sensor value (reading), and sensor information.
Page 542 swFCPortScn 1.3.6.1.4.1.1588.2.1.1.1.0.3 swFCPortScn 1.3.6.1.4.1.1588.2.1.1.1.0.3 Enterprise Variables “swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4” “swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1” “swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10” “swFCPortFlag 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38” A swFCPortScn (3) is generated whenever an FC_Port changes its operational state: for instance, the FC_Port goes from online to offline. The VarBind in the Trap Data Unit contain the corresponding instance of the FC_Port's operational status, index, swFCPortName, and swSsn.
Page 543 swEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.4 swEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.4 Enterprise Variables “swEventIndex 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1” “swEventTimeInfo 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2” “swEventLevel 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3” “swEventRepeatCount 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.4” “swEventDescr 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10” This trap is generated when an event occurs with a level that is at or below “swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1.8.1”. #TYPE A firmware event has been logged. #SUMMARY Event %d: %s (severity level %d) - %s SSN is #%s #ARGUMENTS...
Page 544 swFabricWatchTrap 1.3.6.1.4.1.1588.2.1.1.1.0.5 swFabricWatchTrap 1.3.6.1.4.1.1588.2.1.1.1.0.5 Enterprise Variables “swFwClassAreaIndex 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1” “swFwThresholdIndex 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1” “swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.3” “swFwLabel 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.4” “swFwLastEvent 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.6” “swFwLastEventVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.7” “swFwLastEventTime 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.8” “swFwLastState 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.9” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10” “swFwLastSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.12” Trap to be sent by Fabric Watch to notify of an event. #TYPE Fabric Watch has generated an event. #SUMMARY Threshold %s in Class/Area %d at index %d has generated event %d with %d on %s.
Page 545 swTrackChangesTrap 1.3.6.1.4.1.1588.2.1.1.1.0.6 swTrackChangesTrap 1.3.6.1.4.1.1588.2.1.1.1.0.6 Enterprise Variables “swTrackChangesInfo 1.3.6.1.4.1.1588.2.1.1.1.1.23” “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10” Trap to be sent for tracking log in/log out/configuration changes. #TYPE Track changes has generated a trap. #SUMMARY %s and SSN is #%s #ARGUMENTS 0, 1 #SEVERITY Informational #TIMEINDEX #STATE Operational Some of the triggers that will generate this trap are: •...
Page 546 swIPv6ChangeTrap 1.3.6.1.4.1.1588.2.1.1.1.0.7 swIPv6ChangeTrap 1.3.6.1.4.1.1588.2.1.1.1.0.7 Enterprise Variables “swIPv6Address 1.3.6.1.4.1.1588.2.1.1.1.1.29” “swIPv6Status 1.3.6.1.4.1.1588.2.1.1.1.1.30” This trap is generated when an IPv6 address status change event occurs. Fabric OS MIB Reference 53-1001156-01...
Page 547 swPmgrEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.8 swPmgrEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.8 Enterprise Variables “swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10” “swVfId 1.3.6.1.4.1.1588.2.1.1.1.2.9” This trap is generated when any partition manager change happens. Fabric OS MIB Reference 53-1001156-01...
Page 548: Swsystem Group
swSystem Group swSystem Group swCurrentDate 1.3.6.1.4.1.1588.2.1.1.1.1.1 The current date and time. The return string displays using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year For example:...
Page 549 swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 swBootDate 1.3.6.1.4.1.1588.2.1.1.1.1.2 The date and time when the system last booted. The return string displays using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year For example:...
Page 550 swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 swFWLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.3 The date and time when the firmware was last loaded to the switch. The return string displays using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds...
Page 551 swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 swFlashLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.4 The date and time when the firmware was last downloaded or the configuration file was last changed. The return string displays using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm = minute...
Page 552 swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 swBootPromLastUpdated 1.3.6.1.4.1.1588.2.1.1.1.1.5 The date and time when the BootPROM was last updated. The return string displays using the following format: ddd MMM DD hh:mm:ss yyyy Where: ddd = day MMM = month DD = date hh = hour mm = minute ss = seconds yyyy = year...
Page 553 swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6 swFirmwareVersion 1.3.6.1.4.1.1588.2.1.1.1.1.6 The current version of the firmware. The return value is displayed using the following format: vM.m.f Where: = deployment indicator = major version = minor version = software maintenance version For example, v6.1.0_main_bld36 described firmware version 6.1.0 and the specific build number 36.
Page 554 swOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.7 swOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.7 The current operational status of the switch. Values Possible values are: • online (1) The switch is accessible by an external Fibre Channel port. • offline (2) The switch is not accessible. • testing (3) The switch is in a built-in test mode and is not accessible by an external Fibre Channel port.
Page 555 swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8 The desired administrative status of the switch. A management station might place the switch in a desired state by setting this object accordingly. Values Possible values are: • online (1) Set the switch to be accessible by an external FC port. •...
Page 556 swTelnetShellAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.9 swTelnetShellAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.9 The desired administrative status of the telnet shell. Setting this value to 1 (terminated), deletes the current telnet shell task. When this variable instance is read, it reports the value last set through SNMP. This OID is supported in Fabric OS v2.x through v3.x. This OID is not supported in Fabric OS v4.0 through v4.2.
Page 557: Flash Administration
swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10 swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10 The soft serial number of the switch. This variable will return the “ssn” value that is stored in the config database. If the “ssn” key value pair is not in the config database it will return WWN of the switch.” Flash Administration The next six objects are related to firmware or configuration file management.
Page 558 swFlashDLOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.11 swFlashDLOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.11 The operational status of the flash. This OID cannot be used for either Firmwaredownload or Configdownload (cannot be set and is readonly) for Fabric OS v4.4 and above. The value displayed is always "swCurrent(1)". Fabric OS MIB Reference 53-1001156-01...
Page 559 swFlashDLAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.12 swFlashDLAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.12 The desired state of the flash. The host is specified in swFlashDLHost.0. In addition, the user name is specified in swFlashDLUser.0 and the file name specified in swFlashDLFile.0. This OID is writeable only in Fabric OS v2.6.x and v3.x. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is readonly) for Fabric OS v4.4 and above.
Page 560 swFlashDLHost 1.3.6.1.4.1.1588.2.1.1.1.1.13 swFlashDLHost 1.3.6.1.4.1.1588.2.1.1.1.1.13 The name or IP address (in dot notation) of the host to download or upload a relevant file to the flash. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is readonly) for Fabric OS v4.4 and above.
Page 561 swFlashDLUser 1.3.6.1.4.1.1588.2.1.1.1.1.14 swFlashDLUser 1.3.6.1.4.1.1588.2.1.1.1.1.14 The user name is used on the host for downloading or uploading a relevant file, to or from the flash. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is readonly) for Fabric OS v4.4 and above. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and higher versions.
Page 562 swFlashDLFile 1.3.6.1.4.1.1588.2.1.1.1.1.15 swFlashDLFile 1.3.6.1.4.1.1588.2.1.1.1.1.15 The name of the file to be downloaded or uploaded. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is readonly) for Fabric OS v4.4 and above. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and higher versions.
Page 563 swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 swFlashDLPassword 1.3.6.1.4.1.1588.2.1.1.1.1.16 The password to be used for FTP transfer of files in the download or upload operation. This OID cannot be used for either firmwareDownload or configDownload (cannot be set and is readonly) for Fabric OS v4.4 and above. The value displayed is always NULL (zero-length).This is not supported in v6.0.0 and higher versions.
Page 564 swBeaconOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.18 swBeaconOperStatus 1.3.6.1.4.1.1588.2.1.1.1.1.18 The current operational status of the switch beacon. Values Possible values are: • on (1) The LEDs on the front panel of the switch run alternately from left to right and right to left. The color is yellow. •...
Page 565 swBeaconAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.19 swBeaconAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.19 The desired status of the switch beacon. Values Possible values are: • on (1) The LEDs on the front panel of the switch run alternately from left to right and right to left. Set the color to yellow. •...
Page 566 swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20 swDiagResult 1.3.6.1.4.1.1588.2.1.1.1.1.20 The result of the power-on startup test (POST) diagnostics. Values Possible values are: • sw-ok (1) The switch is okay. • sw-faulty (2) The switch has experienced an unknown fault. • sw-embedded-port-fault (3) The switch has experienced an embedded port fault. Fabric OS MIB Reference 53-1001156-01...
Page 567 swNumSensors 1.3.6.1.4.1.1588.2.1.1.1.1.21 swNumSensors 1.3.6.1.4.1.1588.2.1.1.1.1.21 The number of sensors inside the switch. The Brocade DCX value is between 1 and 57 (temperature =50, fan = 3, power supply = 4). The value might vary depending on the switch model. For Fabric OS v6.1.0, if no sensor is available, this variable is assigned the value -1.
Page 568 swSensorTable 1.3.6.1.4.1.1588.2.1.1.1.1.22 swSensorTable 1.3.6.1.4.1.1588.2.1.1.1.1.22 Table of sensor entries. TABLE 14 Sensors on the Various Brocade Switches Platform Temp Fans Power Supply swNumSensors / connUnitNumSensors Brocade 200E 2 sensors 3 fans 1 PS Brocade 3016 4 sensors Brocade 3200 3 sensors 5 fans 2 absent 2 absent...
Page 569 swSensorEntry 1.3.6.1.4.1.1588.2.1.1.1.1.22.1 swSensorEntry 1.3.6.1.4.1.1588.2.1.1.1.1.22.1 An entry of the sensor information. Index swSensorIndex Fabric OS MIB Reference 53-1001156-01...
Page 570 swSensorIndex 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1 swSensorIndex 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1 The index of the sensor. The values are 1 through the value in swNumSensors. Fabric OS MIB Reference 53-1001156-01...
Page 571 swSensorType 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2 swSensorType 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2 The type of sensor. Fabric OS MIB Reference 53-1001156-01...
Page 572 swSensorStatus 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3 swSensorStatus 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3 The current status of the sensor. Values Possible values are: • 1: unknown (1) • 2: faulty (2) • 3: below-min (3) The sensor value is below the minimal threshold. • 4: nominal (4) • 5: above-max (5) The sensor value is above the maximum threshold. •...
Page 573 swSensorValue 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4 swSensorValue 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4 The current value (reading) of the sensor. The value -2147483648 represents the maximum value of integer value; it also means that the sensor does not have the capability to measure the actual value. In v2.0, the temperature sensor value is in Celsius, the fan value is in RPM (revolutions per minute), and the power supply sensor reading is unknown.
Page 574 swSensorInfo 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5 swSensorInfo 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5 Additional information on the sensor. It contains the sensor type and number, in textual format; for example: SLOT #0: TEMP #3 FAN #1 Power Supply #1 Return values for the Brocade 12000, 24000, and 48000 directors depend upon the configuration of your system.
Page 575 swTrackChangesInfo 1.3.6.1.4.1.1588.2.1.1.1.1.23 swTrackChangesInfo 1.3.6.1.4.1.1588.2.1.1.1.1.23 Track changes string; for trap only. If there are no events to track, the default return value is “No event so far.” If there are events to track, the following are valid return values: • Successful log in •...
Page 576 swID 1.3.6.1.4.1.1588.2.1.1.1.1.24 swID 1.3.6.1.4.1.1588.2.1.1.1.1.24 Not supported in Fabric OS v3.2.0. With VF enabled fabric the number of logical switch will be 0 to 128. Fabric OS MIB Reference 53-1001156-01...
Page 577 swEtherIPAddress 1.3.6.1.4.1.1588.2.1.1.1.1.25 swEtherIPAddress 1.3.6.1.4.1.1588.2.1.1.1.1.25 Not supported in Fabric OS v3.2.0. Supported in Fabric OS v6.2.0 The IP address of the Ethernet interface of this logical switch. Fabric OS MIB Reference 53-1001156-01...
Page 578 swEtherIPMask 1.3.6.1.4.1.1588.2.1.1.1.1.26 swEtherIPMask 1.3.6.1.4.1.1588.2.1.1.1.1.26 Not supported in Fabric OS v3.2.0. The IP mask of the Ethernet interface of this logical switch. Fabric OS MIB Reference 53-1001156-01...
Page 579 swFCIPAddress 1.3.6.1.4.1.1588.2.1.1.1.1.27 swFCIPAddress 1.3.6.1.4.1.1588.2.1.1.1.1.27 Not supported in Fabric OS v3.2.0. The IP address of the FC interface of this logical switch. Fabric OS MIB Reference 53-1001156-01...
Page 580 swFCIPMask 1.3.6.1.4.1.1588.2.1.1.1.1.28 swFCIPMask 1.3.6.1.4.1.1588.2.1.1.1.1.28 Not supported in Fabric OS v3.2.0. The IP mask of the FC interface of this logical switch. Fabric OS MIB Reference 53-1001156-01...
Page 581 swIPv6Address 1.3.6.1.4.1.1588.2.1.1.1.1.29 swIPv6Address 1.3.6.1.4.1.1588.2.1.1.1.1.29 The IPv6 address. Fabric OS MIB Reference 53-1001156-01...
Page 582 swIPv6Status 1.3.6.1.4.1.1588.2.1.1.1.1.30 swIPv6Status 1.3.6.1.4.1.1588.2.1.1.1.1.30 The current status of the IPv6 address. Fabric OS MIB Reference 53-1001156-01...
Page 583 swModel 1.3.6.1.4.1.1588.2.1.1.1.1.31 swModel 1.3.6.1.4.1.1588.2.1.1.1.1.31 Indicates whether the switch is 7500 or 7500E. Fabric OS MIB Reference 53-1001156-01...
Page 584: Swfabric Group
swFabric Group swFabric Group swDomainID 1.3.6.1.4.1.1588.2.1.1.1.2.1 The current Fibre Channel domain ID of the switch. To set a new value, the switch (swAdmStatus) must be in offline or testing state. Fabric OS MIB Reference 53-1001156-01...
Page 585 swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 swPrincipalSwitch 1.3.6.1.4.1.1588.2.1.1.1.2.2 Indicates whether the switch is the principal switch. Values Possible values are: • yes (1) • no (2) Fabric OS MIB Reference 53-1001156-01...
Page 586 swNumNbs 1.3.6.1.4.1.1588.2.1.1.1.2.8 swNumNbs 1.3.6.1.4.1.1588.2.1.1.1.2.8 The number of inter-switch links (ISLs) in the (immediate) neighborhood. Fabric OS MIB Reference 53-1001156-01...
Page 587 swVfId 1.3.6.1.4.1.1588.2.1.1.1.2.9 swVfId 1.3.6.1.4.1.1588.2.1.1.1.2.9 The VFID of the switch. Fabric OS MIB Reference 53-1001156-01...
Page 588 swNbTable 1.3.6.1.4.1.1588.2.1.1.1.2.10 swNbTable 1.3.6.1.4.1.1588.2.1.1.1.2.10 This table contains the ISLs in the immediate neighborhood of the switch. Fabric OS MIB Reference 53-1001156-01...
Page 589 swNbEntry 1.3.6.1.4.1.1588.2.1.1.1.2.10.1 swNbEntry 1.3.6.1.4.1.1588.2.1.1.1.2.10.1 An entry containing each neighbor ISL parameters. Index swNbIndex Fabric OS MIB Reference 53-1001156-01...
Page 590 swNbIndex 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.1 swNbIndex 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.1 The index for neighborhood entry. Fabric OS MIB Reference 53-1001156-01...
Page 591 swNbMyPort 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.2 swNbMyPort 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.2 This is the port that has an ISL to another switch. This value is the same as the physical port number of the local switch +1. The valid values for the Brocade 12000, 24000, and 48000 directors are 1 through the maximum number of ports +1. Fabric OS MIB Reference 53-1001156-01...
Page 592 swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.3 swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.3 This is the Fibre Channel domain on the other end of the ISL. This is the domain ID of the remote switch.Valid values are 1 through 239 as defined by FCS-SW. Fabric OS MIB Reference 53-1001156-01...
Page 593 swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.4 swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.4 This is the port index on the other end of the ISL. The physical port number of the remote switch, plus 1. The valid values for the Brocade 12000, 24000, and 48000 directors are 1 through the maximum number of ports +1. Fabric OS MIB Reference 53-1001156-01...
Page 594 swNbBaudRate 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.5 swNbBaudRate 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.5 The baud rate of the ISL. It is always unknown (0). Values Possible values are: • other (1) None of the following. • oneEighth (2) 155 Mbaud. • quarter (4) 266 Mbaud. • half (8) 532 Mbaud. •...
Page 595 swNbIslState 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.6 swNbIslState 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.6 The current state of the ISL. The possible values are as follwos. 0 - ISL is down. 1 - ISL is initiating and not yet operational. 2, 3, 4, - used for notification of internal states. 5 - ISL is active.
Page 596 swNbIslCost 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.7 swNbIslCost 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.7 The current link cost of the ISL. In other words, the cost of a link to control the routing algorithm. Fabric OS MIB Reference 53-1001156-01...
Page 597 swNbRemPortName 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.8 swNbRemPortName 1.3.6.1.4.1.1588.2.1.1.1.2.10.1.8 The WWN of the remote port. Fabric OS MIB Reference 53-1001156-01...
Page 598 swFabricMemTable 1.3.6.1.4.1.1588.2.1.1.1.2.11 swFabricMemTable 1.3.6.1.4.1.1588.2.1.1.1.2.11 Supported in Fabric OS v2.6.1 and not v3.2.0. This table contains information on the member switches of a fabric. This might not be available on all versions of Fabric OS. This is not available in v6.2.0. Fabric OS MIB Reference 53-1001156-01...
Page 599 swFabricMemEntry 1.3.6.1.4.1.1588.2.1.1.1.2.11.1 swFabricMemEntry 1.3.6.1.4.1.1588.2.1.1.1.2.11.1 An entry containing each switch in the fabric. Index swFabricMemWwn Fabric OS MIB Reference 53-1001156-01...
Page 600 swFabricMemWwn 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.1 swFabricMemWwn 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.1 This object identifies the World Wide Name of the member switch. Fabric OS MIB Reference 53-1001156-01...
Page 601 swFabricMemDid 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.2 swFabricMemDid 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.2 This object identifies the domain ID of the member switch. Fabric OS MIB Reference 53-1001156-01...
Page 602 swFabricMemName 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.3 swFabricMemName 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.3 This object identifies the name of the member switch. Fabric OS MIB Reference 53-1001156-01...
Page 603 swFabricMemEIP 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.4 swFabricMemEIP 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.4 This object identifies the Ethernet IP address of the member switch. Fabric OS MIB Reference 53-1001156-01...
Page 604 swFabricMemFCIP 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.5 swFabricMemFCIP 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.5 This object identifies the Fibre Channel IP address of the member switch. Fabric OS MIB Reference 53-1001156-01...
Page 605 swFabricMemGWIP 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.6 swFabricMemGWIP 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.6 This object identifies the Gateway IP address of the member switch. Fabric OS MIB Reference 53-1001156-01...
Page 606 swFabricMemType 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.7 swFabricMemType 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.7 This object identifies the member switch type. Fabric OS MIB Reference 53-1001156-01...
Page 607 swFabricMemShortVersion 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.8 swFabricMemShortVersion 1.3.6.1.4.1.1588.2.1.1.1.2.11.1.8 This object identifies the Fabric OS version of the member switch. Provides the short version of the Fabric OS version number. Fabric OS MIB Reference 53-1001156-01...
Page 608 swIDIDMode 1.3.6.1.4.1.1588.2.1.1.1.2.12 swIDIDMode 1.3.6.1.4.1.1588.2.1.1.1.2.12 This identifies the status of Insistent Domain ID (IDID) mode. Status indicating if IDID mode is enabled or not. Fabric OS MIB Reference 53-1001156-01...
Page 609: Sw Agent Configuration Group
SW Agent Configuration Group SW Agent Configuration Group swAgtCmtyTable 1.3.6.1.4.1.1588.2.1.1.1.4.11 A table that contains, one entry for each community, the access control and parameters of the community. The table displays all of the community strings (read and write) if it is accessed by the “write” community string.
Page 610 swAgtCmtyEntry 1.3.6.1.4.1.1588.2.1.1.1.4.11.1 swAgtCmtyEntry 1.3.6.1.4.1.1588.2.1.1.1.4.11.1 An entry containing the community parameters. Index swAgtCmtyIdx Fabric OS MIB Reference 53-1001156-01...
Page 611 swAgtCmtyIdx 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.1 swAgtCmtyIdx 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.1 The SNMPv1 community entry. The return value for this entry is 1 through 6. Fabric OS MIB Reference 53-1001156-01...
Page 612 swAgtCmtyStr 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.2 swAgtCmtyStr 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.2 This is a community string supported by the agent. If a new value is set successfully, it takes effect immediately. Default values for communities are as follows: • 1 (Secret Code) • 2 (OrigEquipMfr) • 3 (private) •...
Page 613 swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3 swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3 This is the trap recipient associated with the community. If a new value is set successfully, it takes effect immediately. If not otherwise set, the default IP address for this trap recipient is 0.0.0.0 and the SNMP trap is not sent for the associated community string.
Page 614: Fibre Channel Port Group
swAgtTrapSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4 swAgtTrapSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4 This is the trap severity level associated with swAgtTrapRcp 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.3. The trap severity level, is in conjunction with the event’s severity level. When an event occurs, and if its severity level is at or below the set value, the SNMP trap is sent to configure trap recipients. The severity level is limited to particular events.
Page 615 swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 swFCPortCapacity 1.3.6.1.4.1.1588.2.1.1.1.6.1 The maximum number of Fibre Channel ports on this switch. It includes U_Port, F_Port, FL_Port, and any other types of Fibre Channel port. Values The valid values are as follows: Brocade 3200, 3250 8 ports Brocade 4012 12 ports Brocade 200E, 3800, 3850 16 ports...
Page 616 swFCPortFlag 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 swFCPortFlag 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 A bit map of port status flags that includes the information of port type. Indicates whether the port is virtual or physical. Index swFCPortEntry Fabric OS MIB Reference 53-1001156-01...
Page 617 swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.2 swFCPortTable 1.3.6.1.4.1.1588.2.1.1.1.6.2 A table that contains one entry for each switch port, configuration and service parameters of the port. Fabric OS MIB Reference 53-1001156-01...
Page 618 swFCPortEntry 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 swFCPortEntry 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 An entry containing the configuration and service parameters of the switch port. Index swFCPortIndex Fabric OS MIB Reference 53-1001156-01...
Page 619 swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 The switch port index. Values The physical port number of the switch, plus 1. The valid values for the Brocade 12000, 24000, and 48000 directors are 0 through maximum number of ports. Fabric OS MIB Reference 53-1001156-01...
Page 620 swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 The type of ASIC for the switch port. Values Possible values are: • stitch (1) • flannel (2) • loom (3) (Brocade 2000 series) • bloom (4) (Valid value for Brocade 3250, 3850, 3900, 12000, 24000) •...
Page 621 swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 The physical state of the port. Values Possible values are: • noCard (1) No card is present in this switch slot. • noTransceiver (2) No Transceiver module in this port (Transceiver is the generic name for GBIC, SFP, and so on).
Page 622 swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 The operational status of the port. Values Possible values are: • unknown (0) The port module is physically absent. • online (1) User frames can be passed. • offline (2) No user frames can be passed. •...
Page 623 swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 The desired state of the port. A management station might place the port in a desired state by setting this object accordingly. Values Possible values are: • online (1) User frames can be passed. • offline (2) No user frames can be passed. •...
Page 624 swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 Indicates the link state of the port. When the port's link state changes, its operational status (swFCPortOpStatus) is affected. Values Possible values are: • enabled (1) The port is allowed to participate in the FC-PH protocol with its attached port (or ports if it is in an FC-AL loop).
Page 625 swFCPortTxType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7 swFCPortTxType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7 Indicates the media transmitter type of the port. Values Possible values are: • unknown (1) Cannot determine the port driver. • lw (2) Long wave laser. • sw (3) Short wave laser. • ld (4) Long wave LED. •...
Page 626 swFCPortTxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 swFCPortTxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 Counts the number of Fibre Channel words that the port has transmitted. You can convert words to bytes by multiplying this value by 4. Fabric OS MIB Reference 53-1001156-01...
Page 627 swFCPortRxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12 swFCPortRxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12 Counts the number of Fibre Channel words that the port has received. You can convert words to bytes by multiplying this value by 4. Fabric OS MIB Reference 53-1001156-01...
Page 628 swFCPortTxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13 swFCPortTxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13 Counts the number of Fibre Channel frames that the port has transmitted. Fabric OS MIB Reference 53-1001156-01...
Page 629 swFCPortRxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14 swFCPortRxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14 Counts the number of Fibre Channel frames that the port has received. Fabric OS MIB Reference 53-1001156-01...
Page 630 swFCPortRxC2Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 swFCPortRxC2Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 Counts the number of Class 2 frames that the port has received. Fabric OS MIB Reference 53-1001156-01...
Page 631 swFCPortRxC3Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 swFCPortRxC3Frames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 Counts the number of Class 3 frames that the port has received. Fabric OS MIB Reference 53-1001156-01...
Page 632 swFCPortRxLCs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17 swFCPortRxLCs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17 Counts the number of link control frames that the port has received. Fabric OS MIB Reference 53-1001156-01...
Page 633 swFCPortRxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.18 swFCPortRxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.18 Counts the number of multicast frames that the port has received. Fabric OS MIB Reference 53-1001156-01...
Page 634 swFCPortTooManyRdys 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.19 swFCPortTooManyRdys 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.19 Counts the number of times that RDYs exceeds the frames received. Fabric OS MIB Reference 53-1001156-01...
Page 635 swFCPortNoTxCredits 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.20 swFCPortNoTxCredits 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.20 Counts the number of times that the transmit credit has reached 0. Fabric OS MIB Reference 53-1001156-01...
Page 636 swFCPortRxEncInFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.21 swFCPortRxEncInFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.21 Counts the number of encoding error or disparity error inside frames received. Fabric OS MIB Reference 53-1001156-01...
Page 637 swFCPortRxCrcs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.22 swFCPortRxCrcs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.22 Counts the number of CRC errors detected for frames received. Fabric OS MIB Reference 53-1001156-01...
Page 638 swFCPortRxTruncs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23 swFCPortRxTruncs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23 Counts the number of truncated frames that the port has received. Fabric OS MIB Reference 53-1001156-01...
Page 639 swFCPortRxTooLongs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24 swFCPortRxTooLongs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24 Counts the number of received frames that are too long. Fabric OS MIB Reference 53-1001156-01...
Page 640 swFCPortRxBadEofs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.25 swFCPortRxBadEofs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.25 Counts the number of received frames that have bad EOF delimiters. Fabric OS MIB Reference 53-1001156-01...
Page 641 swFCPortRxEncOutFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26 swFCPortRxEncOutFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26 Counts the number of encoding error or disparity error outside frames received. Fabric OS MIB Reference 53-1001156-01...
Page 642 swFCPortRxBadOs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27 swFCPortRxBadOs 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27 Counts the number of invalid ordered sets received. Fabric OS MIB Reference 53-1001156-01...
Page 643 swFCPortC3Discards 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28 swFCPortC3Discards 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28 Counts the number of Class 3 frames that the port has discarded. Fabric OS MIB Reference 53-1001156-01...
Page 644 swFCPortMcastTimedOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29 swFCPortMcastTimedOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29 Counts the number of multicast frames that have been timed out. Fabric OS MIB Reference 53-1001156-01...
Page 645 swFCPortTxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.30 swFCPortTxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.30 Counts the number of multicast frames that have been transmitted. Fabric OS MIB Reference 53-1001156-01...
Page 646 swFCPortLipIns 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31 swFCPortLipIns 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31 Counts the number of loop initializations that have been initiated by loop devices attached. Fabric OS MIB Reference 53-1001156-01...
Page 647 swFCPortLipOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32 swFCPortLipOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32 Counts the number of loop initializations that have been initiated by the port. Fabric OS MIB Reference 53-1001156-01...
Page 648 swFCPortLipLastAlpa 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33 swFCPortLipLastAlpa 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33 Indicates the physical address (AL_PA) of the loop device that initiated the last loop initialization. Fabric OS MIB Reference 53-1001156-01...
Page 649 swFCPortWwn 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 swFCPortWwn 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 The WWN of the Fibre Channel port. The contents of an instance are in IEEE extended format, as specified in FC-PH. Fabric OS MIB Reference 53-1001156-01...
Page 650 swFCPortSpeed 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.35 swFCPortSpeed 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.35 The desired baud rate for the port. Values The baud rate can be 1 Gbit/sec, 2 Gbit/sec, autonegotiate, or 4 Gbit/sec or 8 Gbit/sec. 4 Gbit/sec is only applicable to the Brocade 4100, 4900, 7500, 7600, and 48000.8 Gbit/sec is only applicable to the Brocade DCX director.
Page 651 swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 Supported in Fabric OS v4.1.x and later. A string that indicates the name of the addressed port. NOTE The names should be persistent across switch reboots. Port names do not have to be unique within a switch or within a fabric. Fabric OS MIB Reference 53-1001156-01...
Page 652 swFCPortSpecifier 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37 swFCPortSpecifier 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37 This string indicates the physical port number of the addressed port. This string can be entered as argument on CLI commands such as portShow or wherever a physical port number is expected. The format of the string is: , 'slot' being present only for bladed systems.
Page 653 swFCPortFlag 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 swFCPortFlag 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 This string is a bit map of the port status flags, including the port type. • virtual (0) is the LISL value • physical (1) Fabric OS MIB Reference 53-1001156-01...
Page 654 swFCPortBrcdType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.39 swFCPortBrcdType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.39 This string indicates the Brocade port type. Fabric OS MIB Reference 53-1001156-01...
Page 655: Name Server Database Group
Name Server Database Group Name Server Database Group swNsLocalNumEntry 1.3.6.1.4.1.1588.2.1.1.1.7.1 The number of local Name Server entries. Fabric OS MIB Reference 53-1001156-01...
Page 656 swNsLocalTable 1.3.6.1.4.1.1588.2.1.1.1.7.2 swNsLocalTable 1.3.6.1.4.1.1588.2.1.1.1.7.2 The table of local Name Server entries. Fabric OS MIB Reference 53-1001156-01...
Page 657 swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 swNsLocalEntry 1.3.6.1.4.1.1588.2.1.1.1.7.2.1 An entry from the local Name Server database. Index swNsEntryIndex Fabric OS MIB Reference 53-1001156-01...
Page 658 swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 swNsEntryIndex 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.1 The index of the Name Server database entry. Fabric OS MIB Reference 53-1001156-01...
Page 659 swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2 swNsPortID 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.2 The Fibre Channel port address ID of the entry. Fabric OS MIB Reference 53-1001156-01...
Page 660 swNsPortType 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.3 swNsPortType 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.3 The type of port for this entry. Values Possible values, as defined in FC-GS-2, are: • nPort (1) • nlPort (2) Fabric OS MIB Reference 53-1001156-01...
Page 661 swNsPortName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.4 swNsPortName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.4 The Fibre Channel WWN of the port entry. Fabric OS MIB Reference 53-1001156-01...
Page 662 swNsPortSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.5 swNsPortSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.5 The contents of a symbolic name of the port entry. In FC-GS-2, a symbolic name consists of a byte array of 1 through 256 bytes, and the first byte of the array specifies the length of its contents. This object variable corresponds to the contents of the symbolic name, with the first byte removed.
Page 663 swNsNodeName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.6 swNsNodeName 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.6 The Fibre Channel WWN of the associated node, as defined in FC-GS-2. Fabric OS MIB Reference 53-1001156-01...
Page 664 swNsNodeSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.7 swNsNodeSymb 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.7 The contents of a Symbolic Name of the node associated with the entry. In FC-GS-2, a Symbolic Name consists of a byte array of 1 through 256 bytes, and the first byte of the array specifies the length of its contents.
Page 665 swNsIPA 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.8 swNsIPA 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.8 The Initial Process Associators of the node for the entry as defined in FC-GS-2. This value is read-only and cannot be changed. Fabric OS MIB Reference 53-1001156-01...
Page 666 swNsIpAddress 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.9 swNsIpAddress 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.9 The IP address of the node for the entry as defined in FC-GS-2. The format of the address is in IPv6. Fabric OS MIB Reference 53-1001156-01...
Page 667 swNsCos 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.10 swNsCos 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.10 The class of services supported by the port. This value is a hard-coded bitmap and indicates the supported services as follows: • Class F (1) • Class 1 (2) • Class F-1 (3) • Class 2 (4) •...
Page 668 swNsFc4 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.11 swNsFc4 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.11 The FC-4s supported by the port, as defined in FC-GS-2. Fabric OS MIB Reference 53-1001156-01...
Page 669 swNsIpNxPort 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.12 swNsIpNxPort 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.12 The object identifies IpAddress of the Nx_Port for the entry. Fabric OS MIB Reference 53-1001156-01...
Page 670 swNsWwn 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.13 swNsWwn 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.13 The object identifies the World Wide Name (WWN) of the Fx_Port for the entry. Fabric OS MIB Reference 53-1001156-01...
Page 671 swNsHardAddr 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.14 swNsHardAddr 1.3.6.1.4.1.1588.2.1.1.1.7.2.1.14 The object identifies the 24-bit hard address of the node for the entry. Fabric OS MIB Reference 53-1001156-01...
Page 672: Event Group
Event Group Event Group Logically, the swEventTable is separate from the error log since it is essentially a view of the error log within a particular time window. Fabric OS MIB Reference 53-1001156-01...
Page 673 swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1.8.1 swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1.8.1 swAgtTrapSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.4.11.1.4, in the absence of swEventTrapLevel, specifies the trap severity level of each defined trap recipient host. This object specifies the swEventTrap level in conjunction with an event’s severity level. When an event occurs, and if its severity level is at or below the value specified by the object instance, the agent sends the associated swEventTrap to configured recipients.
Page 674 swEventNumEntries 1.3.6.1.4.1.1588.2.1.1.1.8.4 swEventNumEntries 1.3.6.1.4.1.1588.2.1.1.1.8.4 The number of entries in the event table. Values (v3.0 only) The value ranges from 0 to 64. (v4.0 only) The value ranges from 0 to 255. (v4.2 only) The value ranges from 0 to 2048. (v4.4 and above) The value ranges from 0 to 1024.
Page 675 swEventTable 1.3.6.1.4.1.1588.2.1.1.1.8.5 swEventTable 1.3.6.1.4.1.1588.2.1.1.1.8.5 The table of event entries. The events will be received from the CHASSIS and the created logical switches. Only external RASlog messages are supported. Fabric OS v6.2.0 does not have Panic or Debug level messages. All messages are documented in the Fabric OS Message Reference. Fabric OS MIB Reference 53-1001156-01...
Page 676 swEventEntry 1.3.6.1.4.1.1588.2.1.1.1.8.5.1 swEventEntry 1.3.6.1.4.1.1588.2.1.1.1.8.5.1 An entry of the event table. Index swEventIndex Fabric OS MIB Reference 53-1001156-01...
Page 677 swEventIndex 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1 swEventIndex 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1 The index of the event entry. Fabric OS MIB Reference 53-1001156-01...
Page 678 swEventTimeInfo 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2 swEventTimeInfo 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2 The date and time that this event occurred. The return string is displayed using the following format: YYYY/MM/DD-hh:mm:ss Where: YYYY = Year MM = Month DD = Date hh = Hour mm = Minute ss = Seconds For example: 2005/12/05-07:33:41 Fabric OS MIB Reference...
Page 679 swEventLevel 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3 swEventLevel 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3 The severity level of this event entry. Values Possible values are: • critical (1) • error (2) • warning (3) • informational (4) Fabric OS MIB Reference 53-1001156-01...
Page 680 swEventRepeatCount 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.4 swEventRepeatCount 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.4 If the most recent event is the same as the previous, this number increments by 1, and is the count of consecutive times this particular event has occurred. Fabric OS MIB Reference 53-1001156-01...
Page 681 swEventDescr 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5 swEventDescr 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5 A textual description of the event. For Fabric OS v6.2.0, the format of error messages has changed. This field now uses the message title and number (for example, WEBD-1006) and the message text. Previously this field used the task ID, and all the message number and message text.
Page 682: Fabric Watch Group
Fabric Watch Group Fabric Watch Group The Fabric Watch group contains one license scalar and two tables. • The scalar, swFwFabricWatchLicense, is used to tell is if the switch has proper license for Fabric Watch. • One table, “swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.2”, contains classArea information such as threshold unit string, time base, low thresholds, and so forth.
Page 683 swFwFabricWatchLicense 1.3.6.1.4.1.1588.2.1.1.1.10.1 swFwFabricWatchLicense 1.3.6.1.4.1.1588.2.1.1.1.10.1 If the license key is installed on the switch for Fabric Watch, the return value is swFwLicensed; otherwise, the value is swFwNotLicensed. Fabric OS MIB Reference 53-1001156-01...
Page 684 swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.2 swFwClassAreaTable 1.3.6.1.4.1.1588.2.1.1.1.10.2 The table of classes and areas. Fabric OS MIB Reference 53-1001156-01...
Page 685 swFwClassAreaEntry 1.3.6.1.4.1.1588.2.1.1.1.10.2.1 swFwClassAreaEntry 1.3.6.1.4.1.1588.2.1.1.1.10.2.1 An entry of the classes and areas. Index swFwClassAreaIndex Fabric OS MIB Reference 53-1001156-01...
Page 686 swFwClassAreaIndex 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 swFwClassAreaIndex 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.1 This index represents the Fabric Watch classArea combination. Fabric OS MIB Reference 53-1001156-01...
Page 687 swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 swFwWriteThVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.2 This applies or cancels the configuration value changes. For a read operation, the return value is always swFwCancelWrite. The following custom configuration variables can be modified: • swFwCustUnit • swFwCustTimebase • swFwCustLow • swFwCustHigh • swFwCustBufSize Changes to these custom configuration variables can be saved by setting this variable to swFwApplyWrite;...
Page 688 swFwDefaultUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3 swFwDefaultUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.3 A default unit string name, used to identify the unit of measure for a Fabric Watch classArea combination. C = environment (class), temperature (area). RPM = environment (class), fan (area). Fabric OS MIB Reference 53-1001156-01...
Page 689 swFwDefaultTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 swFwDefaultTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.4 A default polling period for the Fabric Watch classArea combination. swFwTbMin = port (class), link loss (area). swFwTbNone = environment (class), temperature (area). Fabric OS MIB Reference 53-1001156-01...
Page 690 swFwDefaultLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.5 swFwDefaultLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.5 A default low threshold value. Fabric OS MIB Reference 53-1001156-01...
Page 691 swFwDefaultHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.6 swFwDefaultHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.6 A default high threshold value. Fabric OS MIB Reference 53-1001156-01...
Page 692 swFwDefaultBufSize 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.7 swFwDefaultBufSize 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.7 A default buffer size value. Fabric OS MIB Reference 53-1001156-01...
Page 693 swFwCustUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.8 swFwCustUnit 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.8 A customizable unit string name, used to identify the unit of measure for a Fabric Watch classArea combination. C = environment (class), temperature (area). RPM = environment (class), fan (area). Fabric OS MIB Reference 53-1001156-01...
Page 694 swFwCustTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.9 swFwCustTimebase 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.9 A customizable polling period for the Fabric Watch classArea combination. swFwTbMin = port (class), link loss (area). swFwTbNone = environment (class), temperature (area). Fabric OS MIB Reference 53-1001156-01...
Page 695 swFwCustLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.10 swFwCustLow 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.10 A customizable low-threshold value for a Fabric Watch classArea combination. Fabric OS MIB Reference 53-1001156-01...
Page 696 swFwCustHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.11 swFwCustHigh 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.11 A customizable high-threshold value for a Fabric Watch classArea combination. Fabric OS MIB Reference 53-1001156-01...
Page 697 swFwCustBufSize 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.12 swFwCustBufSize 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.12 A customizable buffer size value for a Fabric Watch classArea combination. Fabric OS MIB Reference 53-1001156-01...
Page 698 swFwThLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.13 swFwThLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.13 swFwThLevel is used to point to the current level for classArea values. It is either default or custom. For a read operation, the return value is either 2 (swFwDefault) or 3 (swFwCustom). 1 (swFwReserved) is obsolete. If the write operation sets the variable to 2 (swFwDefault), the following default configuration variables are used for the Fabric Watch classArea combination: swFwDefaultUnit...
Page 699 swFwWriteActVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.14 swFwWriteActVals 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.14 This applies or cancels the alarm value changes. For a read operation, the return value is always swFwCancelWrite. The following are the custom alarm variables that can be modified: swFwCustChangedActs swFwCustExceededActs swFwCustBelowActs swFwCustAboveActs swFwCustInBetweenActs Changes to these custom alarm variables can be saved by setting this variable to swFwApplyWrite. Changes to these custom alarm variables can be removed by setting this variable to swFwCancelWrite.
Page 700 swFwDefaultChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.15 swFwDefaultChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.15 Default action matrix for changed event. Fabric OS MIB Reference 53-1001156-01...
Page 701 swFwDefaultExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.16 swFwDefaultExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.16 Default action matrix for an exceeded event. The exceeded value might be either above the high threshold or below the low threshold. Fabric OS MIB Reference 53-1001156-01...
Page 702 swFwDefaultBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.17 swFwDefaultBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.17 Default action matrix for below event. Fabric OS MIB Reference 53-1001156-01...
Page 703 swFwDefaultAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.18 swFwDefaultAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.18 Default action matrix for above event. Fabric OS MIB Reference 53-1001156-01...
Page 704 swFwDefaultInBetweenActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.19 swFwDefaultInBetweenActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.19 Default action matrix for in-between event. Fabric OS MIB Reference 53-1001156-01...
Page 705 swFwCustChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.20 swFwCustChangedActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.20 Custom action matrix for changed event. Fabric OS MIB Reference 53-1001156-01...
Page 706 swFwCustExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.21 swFwCustExceededActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.21 Custom action matrix for an exceeded event. Fabric OS MIB Reference 53-1001156-01...
Page 707 swFwCustBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.22 swFwCustBelowActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.22 Custom action matrix for below event. Fabric OS MIB Reference 53-1001156-01...
Page 708 swFwCustAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.23 swFwCustAboveActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.23 Custom action matrix for above event. Fabric OS MIB Reference 53-1001156-01...
Page 709 swFwCustInBetweenActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.24 swFwCustInBetweenActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.24 Custom action matrix for in-between event. Fabric OS MIB Reference 53-1001156-01...
Page 710 swFwValidActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.25 swFwValidActs 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.25 Matrix of valid acts for a classArea. Fabric OS MIB Reference 53-1001156-01...
Page 711 swFwActLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.26 swFwActLevel 1.3.6.1.4.1.1588.2.1.1.1.10.2.1.26 Pointer to the current level for classArea values. It is either default or custom. For a read operation, the return value is either 2 (swFwDefault) or 3 (swFwCustom). 1 (swFwReserved) is obsolete. If the write operation sets the variable to 2 (swFwDefault), the following default action matrix variables are used for the Fabric Watch classArea combination: swFwDefaultChangedActs swFwDefaultExceededActs...
Page 712 swFwThresholdTable 1.3.6.1.4.1.1588.2.1.1.1.10.3 swFwThresholdTable 1.3.6.1.4.1.1588.2.1.1.1.10.3 The table of individual thresholds. Fabric OS MIB Reference 53-1001156-01...
Page 713 swFwThresholdEntry 1.3.6.1.4.1.1588.2.1.1.1.10.3.1 swFwThresholdEntry 1.3.6.1.4.1.1588.2.1.1.1.10.3.1 An entry of an individual threshold. Index swFwClassAreaIndex, swFwThresholdIndex Fabric OS MIB Reference 53-1001156-01...
Page 714 swFwThresholdIndex 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1 swFwThresholdIndex 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.1 Represents the element index of a threshold. For environment class, the indexes are from 2 through (number of environment sensors+1). For example, the indexes for environment class temperature area are: envTemp001: index of 2 envTemp002: index of 3 envTemp003: index of 4 envTemp004: index of 5 envTemp005: index of 6...
Page 715 swFwStatus 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.2 swFwStatus 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.2 Indicates whether a threshold is enabled or disabled. Fabric OS MIB Reference 53-1001156-01...
Page 716 swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.3 swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.3 Name of the threshold. For examples, refer to Table TABLE 15 swFwName Objects and Object Types swFwName Objects (swFwName) Object Types (Threshold Names) envFan001 Env Fan 1 envPS002 Env Power Supply 2 envTemp001 Env Temperature 1 gbicTemp001 GBIC Temperature 1 gbicRXP001...
Page 717 swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.3 TABLE 15 swFwName Objects and Object Types (Continued) swFwName Objects (swFwName) Object Types (Threshold Names) (Continued) fcuportWords013 FCU Port Invalid Words 13 portCRCs000 Port Invalid CRCs 0 Port Invalid CRCs 0 portLink000 Port Link Failures 0 portProtoErr000 Port Protocol Errors 0 portRXPerf000 Port RX Performance 0 portSignal000...
Page 718 swFwLabel 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.4 swFwLabel 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.4 Label of the threshold. Refer to “swFwName 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.3” on page 700. Fabric OS MIB Reference 53-1001156-01...
Page 719 swFwCurVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.5 swFwCurVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.5 Current counter of the threshold. Fabric OS MIB Reference 53-1001156-01...
Page 720 swFwLastEvent 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.6 swFwLastEvent 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.6 Last event type of the threshold. Fabric OS MIB Reference 53-1001156-01...
Page 721 swFwLastEventVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.7 swFwLastEventVal 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.7 Last event value of the threshold. Fabric OS MIB Reference 53-1001156-01...
Page 722 swFwLastEventTime 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.8 swFwLastEventTime 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.8 Last event time of the threshold. This value is in the same format as in swCurrentDate. Fabric OS MIB Reference 53-1001156-01...
Page 723 swFwLastState 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.9 swFwLastState 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.9 Last event state of the threshold. Fabric OS MIB Reference 53-1001156-01...
Page 724 swFwBehaviorType 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.10 swFwBehaviorType 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.10 A behavior of which the thresholds generate event. Fabric OS MIB Reference 53-1001156-01...
Page 725 swFwBehaviorInt 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.11 swFwBehaviorInt 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.11 An integer of which the thresholds generate continuous event. Fabric OS MIB Reference 53-1001156-01...
Page 726 swFwLastSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.12 swFwLastSeverityLevel 1.3.6.1.4.1.1588.2.1.1.1.10.3.1.12 This object is a last event severity level of the threshold. This object obsoletes swEventTrapLevel 1.3.6.1.4.1.1588.2.1.1.1.8.1. Fabric OS MIB Reference 53-1001156-01...
Page 727: End Device Group
End Device Group End Device Group swEndDeviceRlsTable 1.3.6.1.4.1.1588.2.1.1.1.21.1 The table of RLS for individual end devices. By default, no data appears in this table. Fabric OS MIB Reference 53-1001156-01...
Page 728 swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.21.1.1 swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.21.1.1 An entry of an individual end devices' RLS. Index swEndDevicePort, swEndDeviceAlpa Since Brocade switches start with port # 0, the SNMP port # should be physical port # plus 1. In turn, that means that SNMP port # 3 translates to port # 2. Fabric OS MIB Reference 53-1001156-01...
Page 729 swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 This object represents the port of the local switch to which the end device is connected. This is an obsolete entry and does not show any value. Fabric OS MIB Reference 53-1001156-01...
Page 730 swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2 swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2 This object represents the AL_PA of the end device. SNMP AL_PA number should be the logical AL_PA number plus 1. For example, SNMP AL_PA number 0xf0 translates to 0xef. This is an obsolete entry and does not show any value. Fabric OS MIB Reference 53-1001156-01...
Page 731 swEndDevicePortID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3 swEndDevicePortID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3 The Fibre Channel port address ID of the entry. Fabric OS MIB Reference 53-1001156-01...
Page 732 swEndDeviceLinkFailure 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4 swEndDeviceLinkFailure 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4 Link failure count for the end device. Fabric OS MIB Reference 53-1001156-01...
Page 733 swEndDeviceSyncLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5 swEndDeviceSyncLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5 Sync loss count for the end device. Fabric OS MIB Reference 53-1001156-01...
Page 734 swEndDeviceSigLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6 swEndDeviceSigLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6 Sig loss count for the end device. Fabric OS MIB Reference 53-1001156-01...
Page 735 swEndDeviceProtoErr 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.7 swEndDeviceProtoErr 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.7 Protocol err count for the end device. Fabric OS MIB Reference 53-1001156-01...
Page 736 swEndDeviceInvalidWord 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.8 swEndDeviceInvalidWord 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.8 Invalid word count for the end device. Fabric OS MIB Reference 53-1001156-01...
Page 737: Switch Group
swEndDeviceInvalidCRC 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.9 swEndDeviceInvalidCRC 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.9 Invalid CRC count for the end device. Switch Group Not supported. Fabric OS MIB Reference 53-1001156-01...
Page 738 swGroupTable 1.3.6.1.4.1.1588.2.1.1.1.22.1 swGroupTable 1.3.6.1.4.1.1588.2.1.1.1.22.1 The table of groups. This is not available on all versions of Fabric OS. Fabric OS MIB Reference 53-1001156-01...
Page 739 swGroupEntry 1.3.6.1.4.1.1588.2.1.1.1.22.1.1 swGroupEntry 1.3.6.1.4.1.1588.2.1.1.1.22.1.1 An entry of table of groups. Index swGroupIndex Fabric OS MIB Reference 53-1001156-01...
Page 740 swGroupIndex 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.1 swGroupIndex 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.1 This object is the group index, starting from 1. Fabric OS MIB Reference 53-1001156-01...
Page 741 swGroupName 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.2 swGroupName 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.2 This object identifies the name of the group. Fabric OS MIB Reference 53-1001156-01...
Page 742 swGroupType 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.3 swGroupType 1.3.6.1.4.1.1588.2.1.1.1.22.1.1.3 This object identifies the type of the group. Fabric OS MIB Reference 53-1001156-01...
Page 743 swGroupMemTable 1.3.6.1.4.1.1588.2.1.1.1.22.2 swGroupMemTable 1.3.6.1.4.1.1588.2.1.1.1.22.2 The table of members of all groups. This might not be available on all versions of the Fabric OS. Fabric OS MIB Reference 53-1001156-01...
Page 744 swGroupMemEntry 1.3.6.1.4.1.1588.2.1.1.1.22.2.1 swGroupMemEntry 1.3.6.1.4.1.1588.2.1.1.1.22.2.1 An entry for a member of a group. Index swGroupID, swGroupMemWwn Fabric OS MIB Reference 53-1001156-01...
Page 745 swGroupID 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.1 swGroupID 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.1 This object identifies the Group ID of the member switch. Fabric OS MIB Reference 53-1001156-01...
Page 746 swGroupMemWwn 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.2 swGroupMemWwn 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.2 This object identifies the WWN of the member switch. Fabric OS MIB Reference 53-1001156-01...
Page 747 swGroupMemPos 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.3 swGroupMemPos 1.3.6.1.4.1.1588.2.1.1.1.22.2.1.3 This object identifies the position of the member switch in the group, based on the order that the switches were added in the group. Fabric OS MIB Reference 53-1001156-01...
Page 748: Asic Performance Monitoring Group
ASIC Performance Monitoring Group ASIC Performance Monitoring Group swBlmPerfALPAMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.1 AL_PA monitoring counter table. For the Brocade 4100, 12 filter monitors per port are supported. Fabric OS MIB Reference 53-1001156-01...
Page 749 swBlmPerfALPAMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.1.1 swBlmPerfALPAMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.1.1 AL_PA monitoring counter for given AL_PA. Index swEndDevicePort, swEndDeviceAlpa Fabric OS MIB Reference 53-1001156-01...
Page 750 swBlmPerfAlpaPort 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.1 swBlmPerfAlpaPort 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.1 This object identifies the port index of the switch. Fabric OS MIB Reference 53-1001156-01...
Page 751 swBlmPerfAlpaIndx 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.2 swBlmPerfAlpaIndx 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.2 This object identifies the AL_PA index. There can be 126 AL_PA values. Fabric OS MIB Reference 53-1001156-01...
Page 752 swBlmPerfAlpa 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.3 swBlmPerfAlpa 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.3 This object identifies the AL_PA values. These values range between x'01' and x'EF' (1 to 239). AL_PA value x'00' is reserved for FL_Port. If Alpha device is invalid, then it will have -1 value. Fabric OS MIB Reference 53-1001156-01...
Page 753 swBlmPerfAlpaCRCCnt 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.4 swBlmPerfAlpaCRCCnt 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.4 Get CRC count for given AL_PA and port. This monitoring provides information on the number of CRC errors that occurred on the frames destined to each possible AL_PA attached to a specific port. For the Brocade 4100, this value will always be 0. CRC counters are not supported on this platform. Fabric OS MIB Reference 53-1001156-01...
Page 754 swBlmPerfEEMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.2 swBlmPerfEEMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.2 End-to-end monitoring counter table. Fabric OS MIB Reference 53-1001156-01...
Page 755 swBlmPerfEEMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.2.1 swBlmPerfEEMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.2.1 End-to-end monitoring counter for given port. Index swBlmPerfEEPort, swBlmPerfEERefKey Fabric OS MIB Reference 53-1001156-01...
Page 756 swBlmPerfEEPort 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1 swBlmPerfEEPort 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1 This object identifies the port number of the switch. Fabric OS MIB Reference 53-1001156-01...
Page 757 swBlmPerfEERefKey 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.2 swBlmPerfEERefKey 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.2 This object identifies the reference number of the counter. This reference is a number assigned when a filter is created. In the SNMP Index, start with one instead of 0, add one to the actual reference key. Fabric OS MIB Reference 53-1001156-01...
Page 758 swBlmPerfEECRC 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.3 swBlmPerfEECRC 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.3 End-to-end CRC error for the frames that matched the SID-DID pair. Fabric OS MIB Reference 53-1001156-01...
Page 759 swBlmPerfEEFCWRx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.4 swBlmPerfEEFCWRx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.4 Get end-to-end count of Fibre Channel words (FCW) received by the port that matched the SID-DID pair. Fabric OS MIB Reference 53-1001156-01...
Page 760 swBlmPerfEEFCWTx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.5 swBlmPerfEEFCWTx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.5 Get end-to-end count of Fibre Channel words (FCW) transmitted by the port that matched the SID-DID pair. Fabric OS MIB Reference 53-1001156-01...
Page 761 swBlmPerfEESid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.6 swBlmPerfEESid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.6 Gets DID information by reference number. Fabric OS MIB Reference 53-1001156-01...
Page 762 swBlmPerfEEDid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.7 swBlmPerfEEDid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.7 Gets SID information by reference number. SID (Source Identifier) is a 3-byte field in the frame header used to indicate the address identifier of the N_Port from which the frame was sent. Fabric OS MIB Reference 53-1001156-01...
Page 763 swBlmPerfFltMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.3 swBlmPerfFltMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.3 Filter-based monitoring counter. Fabric OS MIB Reference 53-1001156-01...
Page 764 swBlmPerfFltMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.3.1 swBlmPerfFltMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.3.1 Filter-based monitoring counter for given port. Index swBlmPerfFltPort, swBlmPerfFltRefkey Fabric OS MIB Reference 53-1001156-01...
Page 765 swBlmPerfFltPort 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.1 swBlmPerfFltPort 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.1 This object identifies the port number of the switch. Fabric OS MIB Reference 53-1001156-01...
Page 766 swBlmPerfFltRefkey 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.2 swBlmPerfFltRefkey 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.2 This object identifies the reference number of the filter. This reference number is assigned when a filter is created. In the SNMP Index, start with one instead of 0, add one to actual reference key. Fabric OS MIB Reference 53-1001156-01...
Page 767 swBlmPerfFltCnt 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.3 swBlmPerfFltCnt 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.3 Get statistics of filter-based monitor. Filter-based monitoring provides information about a filter hit count, such as: • Read command • SCSI or IP traffic • SCSI Read/Write Fabric OS MIB Reference 53-1001156-01...
Page 768 swBlmPerfFltAlias 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.4 swBlmPerfFltAlias 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.4 Alias name for the filter. Fabric OS MIB Reference 53-1001156-01...
Page 769: Trunking Group
Trunking Group Trunking Group swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1 Whether the switch supports the trunking feature or not: no (0) or yes (8). Fabric OS MIB Reference 53-1001156-01...
Page 770 swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2 Displays trunking information for the switch. For the Brocade 4100, cc ports per trunk are supported. Fabric OS MIB Reference 53-1001156-01...
Page 771 swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1 Entry for the trunking table. Index swTrunkPortIndex Fabric OS MIB Reference 53-1001156-01...
Page 772 swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1 This object identifies the switch port index. The value of a port index is extracted from the second octet of the port WWN stored in swFCPortWwn (Refer to swFCPortWwn 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 in the Fibre Channel Port Group). Fabric OS MIB Reference 53-1001156-01...
Page 773 swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 swTrunkGroupNumber 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.2 This object is a logical entity that specifies the group number to which the port belongs. If this value is 0, the port is not trunked. Fabric OS MIB Reference 53-1001156-01...
Page 774 swTrunkMaster 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.3 swTrunkMaster 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.3 Port number that is the trunk master of the group. The trunk master implicitly defines the group. All ports with the same master are considered to be part of the same group. Fabric OS MIB Reference 53-1001156-01...
Page 775 swPortTrunked 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.4 swPortTrunked 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.4 The active trunk status of the member port. Values are enabled (1) or disabled (0). Fabric OS MIB Reference 53-1001156-01...
Page 776 swTrunkGrpTable 1.3.6.1.4.1.1588.2.1.1.1.24.3 swTrunkGrpTable 1.3.6.1.4.1.1588.2.1.1.1.24.3 Displays trunking performance information for the switch. Fabric OS MIB Reference 53-1001156-01...
Page 777 swTrunkGrpEntry 1.3.6.1.4.1.1588.2.1.1.1.24.3.1 swTrunkGrpEntry 1.3.6.1.4.1.1588.2.1.1.1.24.3.1 Entry for the trunking group table. Index swTrunkGrpNumber Fabric OS MIB Reference 53-1001156-01...
Page 778 swTrunkGrpNumber 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.1 swTrunkGrpNumber 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.1 This object is a logical entity that specifies the group number to which port belongs. Fabric OS MIB Reference 53-1001156-01...
Page 779 swTrunkGrpMaster 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.2 swTrunkGrpMaster 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.2 This object gives the master port ID for the trunk group. Fabric OS MIB Reference 53-1001156-01...
Page 780 swTrunkGrpTx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.3 swTrunkGrpTx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.3 Gives the aggregate value of the transmitted words from this trunk group. NOTE The syntax for this MIB variable is an OCTET STRING. The output is shown in hexadecimal value. The value of swTrunkGrpTx is the 4-byte word transmitted in the TrunkGrp port. This value can be obtained through the CLI in the output of the portStatsShow command (stat_wtx value) for the corresponding trunk ports.
Page 781 swTrunkGrpRx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.4 swTrunkGrpRx 1.3.6.1.4.1.1588.2.1.1.1.24.3.1.4 Gives the aggregate value of the received words by this trunk group. The syntax for this MIB variable is an OCTET STRING. The output is shown in hexadecimal value. The value of swTrunkGrpRx is the 4-byte word received in the TrunkGrp port. This value can be obtained through the CLI in the output of the portStatsShow command (stat_wrx value) for the corresponding trunk ports.
Page 782 swTopTalkerMntMode 1.3.6.1.4.1.1588.2.1.1.1.25.1 swTopTalkerMntMode 1.3.6.1.4.1.1588.2.1.1.1.25.1 This object gives the mode in which toptalker is installed. Fabricmode(1) and fportmode(2) are the possible modes. Fabric OS MIB Reference 53-1001156-01...
Page 783 swTopTalkerMntNumEntries 1.3.6.1.4.1.1588.2.1.1.1.25.2 swTopTalkerMntNumEntries 1.3.6.1.4.1.1588.2.1.1.1.25.2 This object provides the number of toptalking flows that are existing in the switch. Fabric OS MIB Reference 53-1001156-01...
Page 784 swTopTalkerMntTable 1.3.6.1.4.1.1588.2.1.1.1.25.3 swTopTalkerMntTable 1.3.6.1.4.1.1588.2.1.1.1.25.3 Table to display toptalkingflows. Fabric OS MIB Reference 53-1001156-01...
Page 785 swTopTalkerMntEntry 1.3.6.1.4.1.1588.2.1.1.1.25.3.1 swTopTalkerMntEntry 1.3.6.1.4.1.1588.2.1.1.1.25.3.1 Entry for the toptalkingflows. Fabric OS MIB Reference 53-1001156-01...
Page 786 swTopTalkerMntIndex 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.1 swTopTalkerMntIndex 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.1 This object identifies the list/object entry. The possibles values are one to maximum number of entries. Fabric OS MIB Reference 53-1001156-01...
Page 787 swTopTalkerMntPort 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.2 swTopTalkerMntPort 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.2 This object identifies the switch port number on which the F_port mode toptalker is added. This attribute is applicable to F_port mode only. Fabric OS MIB Reference 53-1001156-01...
Page 788 swTopTalkerMntSpid 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.3 swTopTalkerMntSpid 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.3 This object identifies the SID of the host. Fabric OS MIB Reference 53-1001156-01...
Page 789 swTopTalkerMntDpid 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.4 swTopTalkerMntDpid 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.4 This object identifies the DID of the SID-DID pair. Fabric OS MIB Reference 53-1001156-01...
Page 790 swTopTalkerMntflow 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.5 swTopTalkerMntflow 1.3.6.1.4.1.1588.2.1.1.1.25.3.1.5 This object identifies the traffic flow in MB/sec. Fabric OS MIB Reference 53-1001156-01...
Page 791: Ha Mib Overview
Chapter High-Availability MIB Objects This chapter provides descriptions and other information specific to High-Availability MIB object types and includes the following sections: • HA MIB Overview ..........775 •...
Page 792 HA MIB Overview fruTable 1.3.6.1.4.1.1588.2.1.2.1.5 fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.1 fruClass 1.3.6.1.4.1.1588.2.1.2.1.5.1.1 fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 fruObjectNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.3 fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 fruSupplierPartNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.5 fruSupplierSerialNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.6 fruSupplierRevCode 1.3.6.1.4.1.1588.2.1.2.1.5.1.7 fruHistoryTable 1.3.6.1.4.1.1588.2.1.2.1.6 fruHistoryEntry 1.3.6.1.4.1.1588.2.1.2.1.6.1 fruHistoryIndex 1.3.6.1.4.1.1588.2.1.2.1.6.1.1 fruHistoryClass 1.3.6.1.4.1.1588.2.1.2.1.6.1.2 fruHistoryObjectNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.3 fruHistoryEvent 1.3.6.1.4.1.1588.2.1.2.1.6.1.4 fruHistoryTime 1.3.6.1.4.1.1588.2.1.2.1.6.1.5 fruHistoryFactoryPartNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.6 fruHistoryFactorySerialNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.7 cpTable 1.3.6.1.4.1.1588.2.1.2.1.7 cpEntry 1.3.6.1.4.1.1588.2.1.2.1.7.1 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 cpIpAddress 1.3.6.1.4.1.1588.2.1.2.1.7.1.2...
Page 793: High-Availability Group
High-Availability Group High-Availability Group This section describes the MIB objects in the High-Availability group. Fabric OS MIB Reference 53-1001156-01...
Page 794 haStatus 1.3.6.1.4.1.1588.2.1.2.1.1 haStatus 1.3.6.1.4.1.1588.2.1.2.1.1 Indicates whether the system is redundant. Values Possible values are: • 1: redundant(0) Dual CP with standby CP ready to take over. • 2: nonredundant(1) Single or Dual CP system where the standby CP is not available to take over operation of the switch.
Page 795: Fru Table
FRU Table FRU Table fruTable 1.3.6.1.4.1.1588.2.1.2.1.5 This table inventories the field replaceable unit (FRU) slots available. This table contains an entry for each entry in the entPhysicalTable that has entPhysicalClass set to “Container (5)” and has a child entry having entPhysicalIsFRU set to “true (1)”. In Fabric OS v6.1.0 and above the chassis is marked as a FRU.
Page 796 fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.1 fruEntry 1.3.6.1.4.1.1588.2.1.2.1.5.1 An entry for FRU slot in the fruTable. Index entPhysicalIndex Fabric OS MIB Reference 53-1001156-01...
Page 797 fruClass 1.3.6.1.4.1.1588.2.1.2.1.5.1.1 fruClass 1.3.6.1.4.1.1588.2.1.2.1.5.1.1 The type of the FRU object that this slot can hold. Values Possible values are: • 1: other(1) • 2: unknown(2) • 3: chassis(3) • 4: cp(4) • 5: other-CP(5) • 6: switchblade(6) • 7: wwn(7) •...
Page 798 fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 fruStatus 1.3.6.1.4.1.1588.2.1.2.1.5.1.2 The current status of the FRU object in the slot. Values Possible values are: • 1: other(1) • 2: unknown(2) • 3: on(3) • 4: off(4) • 5: faulty(5) Fabric OS MIB Reference 53-1001156-01...
Page 799 fruObjectNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.3 fruObjectNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.3 The slot number of the blade, and the unit number for everything else. Fabric OS MIB Reference 53-1001156-01...
Page 800 fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 fruSupplierId 1.3.6.1.4.1.1588.2.1.2.1.5.1.4 The supplier ID. Fabric OS MIB Reference 53-1001156-01...
Page 801 fruSupplierPartNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.5 fruSupplierPartNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.5 The supplier part number. Fabric OS MIB Reference 53-1001156-01...
Page 802 fruSupplierSerialNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.6 fruSupplierSerialNum 1.3.6.1.4.1.1588.2.1.2.1.5.1.6 The supplier serial number. Fabric OS MIB Reference 53-1001156-01...
Page 803 fruSupplierRevCode 1.3.6.1.4.1.1588.2.1.2.1.5.1.7 fruSupplierRevCode 1.3.6.1.4.1.1588.2.1.2.1.5.1.7 The supplier revision code. Fabric OS MIB Reference 53-1001156-01...
Page 804: Fru History Table
FRU History Table FRU History Table fruHistoryTable 1.3.6.1.4.1.1588.2.1.2.1.6 This table gives the contents of the entire history log of the FRU events. Fabric OS MIB Reference 53-1001156-01...
Page 805 fruHistoryEntry 1.3.6.1.4.1.1588.2.1.2.1.6.1 fruHistoryEntry 1.3.6.1.4.1.1588.2.1.2.1.6.1 An entry in this table represents a particular FRU event. Index fruHistoryIndex Fabric OS MIB Reference 53-1001156-01...
Page 806 fruHistoryIndex 1.3.6.1.4.1.1588.2.1.2.1.6.1.1 fruHistoryIndex 1.3.6.1.4.1.1588.2.1.2.1.6.1.1 Index of the FRU event in the history table. Fabric OS MIB Reference 53-1001156-01...
Page 807 fruHistoryClass 1.3.6.1.4.1.1588.2.1.2.1.6.1.2 fruHistoryClass 1.3.6.1.4.1.1588.2.1.2.1.6.1.2 The type of the FRU object related to the event. Values Possible values are: • 1: other(1) • 2: unknown(2) • 3: chassis(3) • 4: cp(4) • 5: other-CP(5) • 6: switchblade(6) • 7: wwn(7) • 8: powerSupply(8) •...
Page 808 fruHistoryObjectNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.3 fruHistoryObjectNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.3 The slot number of the blade and the unit number for everything else. Fabric OS MIB Reference 53-1001156-01...
Page 809 fruHistoryEvent 1.3.6.1.4.1.1588.2.1.2.1.6.1.4 fruHistoryEvent 1.3.6.1.4.1.1588.2.1.2.1.6.1.4 The type of the FRU event. Values Possible values are: • 1: added(1) • 2: removed(2) • 3: invalid(3) Fabric OS MIB Reference 53-1001156-01...
Page 810 fruHistoryTime 1.3.6.1.4.1.1588.2.1.2.1.6.1.5 fruHistoryTime 1.3.6.1.4.1.1588.2.1.2.1.6.1.5 The time at which this event happened. Fabric OS MIB Reference 53-1001156-01...
Page 811 fruHistoryFactoryPartNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.6 fruHistoryFactoryPartNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.6 The Brocade part number of the FRU object. Fabric OS MIB Reference 53-1001156-01...
Page 812 fruHistoryFactorySerialNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.7 fruHistoryFactorySerialNum 1.3.6.1.4.1.1588.2.1.2.1.6.1.7 The Brocade serial number of the FRU object. Fabric OS MIB Reference 53-1001156-01...
Page 813: Cp Table
CP Table CP Table cpTable 1.3.6.1.4.1.1588.2.1.2.1.7 This table lists all the CPs in the system. Fabric OS MIB Reference 53-1001156-01...
Page 814 cpEntry 1.3.6.1.4.1.1588.2.1.2.1.7.1 cpEntry 1.3.6.1.4.1.1588.2.1.2.1.7.1 An entry represents a single CP in the system. Index entPhysicalIndex Fabric OS MIB Reference 53-1001156-01...
Page 815 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 cpStatus 1.3.6.1.4.1.1588.2.1.2.1.7.1.1 The current status of the CP. Values Possible values are: • 1: other(1) • 2: unknown(2) • 3: active(3) • 4: standby(4) • 5: failed(5) Fabric OS MIB Reference 53-1001156-01...
Page 816 cpIpAddress 1.3.6.1.4.1.1588.2.1.2.1.7.1.2 cpIpAddress 1.3.6.1.4.1.1588.2.1.2.1.7.1.2 The IP address of the Ethernet interface of this CP. Fabric OS MIB Reference 53-1001156-01...
Page 817 cpIpMask 1.3.6.1.4.1.1588.2.1.2.1.7.1.3 cpIpMask 1.3.6.1.4.1.1588.2.1.2.1.7.1.3 The IP mask of the Ethernet interface of this CP. Fabric OS MIB Reference 53-1001156-01...
Page 818 cpIpGateway 1.3.6.1.4.1.1588.2.1.2.1.7.1.4 cpIpGateway 1.3.6.1.4.1.1588.2.1.2.1.7.1.4 The IP address of the IP gateway for this CP. Fabric OS MIB Reference 53-1001156-01...
Page 819: Ha-Mib Traps
cpLastEvent 1.3.6.1.4.1.1588.2.1.2.1.7.1.5 cpLastEvent 1.3.6.1.4.1.1588.2.1.2.1.7.1.5 The last event related to this CP. Values Possible values are: • 1: other(1) • 2: unknown(2) • 3: haSync(3) • 4: haOutSync(4) • 5: cpFaulty(5) • 6: cpHealthy(6) • 7: cpActive(7) • 8: configChange(8) • 9: failOverStart(9) •...
Page 820 fruStatusChanged 1.3.6.1.4.1.1588.2.1.2.2.0.1 fruStatusChanged 1.3.6.1.4.1.1588.2.1.2.2.0.1 Objects 1: entPhysicalName 2: fruStatus Status Current This trap is sent when the status of any FRU object changes. Some of the triggers that will generate this trap are: • Enable or disable a FRU component Sample trap output for Fabric OS v6.1.0;...
Page 821 cpStatusChanged 1.3.6.1.4.1.1588.2.1.2.2.0.2 cpStatusChanged 1.3.6.1.4.1.1588.2.1.2.2.0.2 Objects 1: cpStatus 2: cpLastEvent 3: swID 4: swSsn Status Current This trap is sent when the status of any CP object changes. The cpLastEvent variable provides the information about the event that occurred. Some of the triggers that will generate this trap are: •...
Page 822: Ha-Mib Traps And Sample Triggers
fruHistoryTrap 1.3.6.1.4.1.1588.2.1.2.2.0.3 fruHistoryTrap 1.3.6.1.4.1.1588.2.1.2.2.0.3 Objects 1: fruHistoryClass 2: fruHistoryObjectNum 3: fruHistoryEvent 4: fruHistoryTime 5: fruHistoryFactoryPartNum 6: fruHistoryFactorySerialNum Status Current This trap is generated when a FRU is added or removed. Sample trap output for Fabric OS v4.4.0: fruHistoryClass.40 = powerSupply(8) fruHistoryObjectNum.40 = 2 fruHistoryEvent.40 = removed(2) fruHistoryTime.40 = Fri Aug 13 07:24:00 2004...
Page 823: Ficon Mib Overview
Chapter FICON MIB Objects This chapter provides descriptions and other information specific to FICON MIB (LINK-INCIDENT-MIB) object types, including the following information: • FICON MIB Overview ......... . . 807 •...
Page 824 FICON MIB Overview - internet - private - enterprises - bsci - commDev - fibreChannel - fcSwitch - linkIncidentMIB - ficonRNID - ficonLIRR - ficonRLIR - linkIncidentMIBTraps FIGURE 54 Overall Tree Structure for FICON MIB (linkIncidentMIB) - linkIncidentMIB - ficonRNID nodeRNIDTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.2.1 nodeRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.2 nodeRNIDEntry 1.3.6.1.4.1.1588.2.1.1.50.2.2.1...
Page 825: Textual Conventions
FICON MIB Overview rLIRTable 1.3.6.1.4.1.1588.2.1.1.50.4.2 rLIREntry 1.3.6.1.4.1.1588.2.1.1.50.4.2.1 rLIRIndex 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.1 rLIRIncidentPortWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.2 rLIRIncidentNodeWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.3 rLIRIncidentPortType 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.5 rLIRIncidentPID 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.6 rLIRIncidentPortNumber 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.7 rLIRConnectedPortWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.8 rLIRConnectedNodeWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.9 rLIRFabricWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.10 rLIRLinkFailureType 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.11 rLIRTimeStamp 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.12 rLIRFormat 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.13 FIGURE 55 linkIncidentMIB Hierarchy - linkIncidentMIBTraps - linkIncidentMIBTrapPrefix linkRNIDDeviceRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.1 linkRNIDDeviceDeRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.2 linkLIRRListenerAdded 1.3.6.1.4.1.1588.2.1.1.50.21.0.3 linkLIRRListenerRemoved 1.3.6.1.4.1.1588.2.1.1.50.21.0.4...
Page 826 FICON MIB Overview TABLE 19 FICON MIB Textual Conventions (Continued) Name Status Description Syntax RNIDTagType Current Represents the value of RNID OCTET STRING (SIZE (2)) Tag, in hexadecimal format. Note: Includes DISPLAY-HINT “x”. LinkWwn Current Represents the link WWN. OCTET STRING (SIZE (8)) RegType Current Represents the RNID...
Page 827: Ficonrnid Group
ficonRNID Group ficonRNID Group This group contains all Request Node Identification Data (RNID) group objects for FICON. Fabric OS MIB Reference 53-1001156-01...
Page 828 nodeRNIDTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.2.1 nodeRNIDTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.2.1 The number of entries in Request Node Identification Data (RNID) table. Refer to the Fabric OS Command Reference and the ficonShow command for additional information on FICON MIB tables. Fabric OS MIB Reference 53-1001156-01...
Page 829 nodeRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.2 nodeRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.2 A table that contains one entry for each FICON RNID node attached to a switch. Fabric OS MIB Reference 53-1001156-01...
Page 830 nodeRNIDEntry 1.3.6.1.4.1.1588.2.1.1.50.2.2.1 nodeRNIDEntry 1.3.6.1.4.1.1588.2.1.1.50.2.2.1 A entry containing the RNID information for a FICON node. Index nodeRNIDIndex Fabric OS MIB Reference 53-1001156-01...
Page 831 nodeRNIDIndex 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.1 nodeRNIDIndex 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.1 Index into the nodeRNIDTable. Fabric OS MIB Reference 53-1001156-01...
Page 832 nodeRNIDIncidentPortWWN 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.2 nodeRNIDIncidentPortWWN 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.2 Port WWN for Incident port. An N_Port (FICON device or host) is an incident port. Fabric OS MIB Reference 53-1001156-01...
Page 833 nodeRNIDPID 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.3 nodeRNIDPID 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.3 PID for an Incident port. Fabric OS MIB Reference 53-1001156-01...
Page 834 nodeRNIDFlags 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.4 nodeRNIDFlags 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.4 RNID flags for an Incident port. Bits 0–2 of the flag describe the validity of bits 3–7 of the flag. Bit 3 of the flag specifies whether the node is a device-type node or a central-processor-complex-type (CPC-type) node.
Page 835 nodeRNIDType 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.5 nodeRNIDType 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.5 Number associated with a node. Fabric OS MIB Reference 53-1001156-01...
Page 836 nodeRNIDModel 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.6 nodeRNIDModel 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.6 Model number of the RNID node. Fabric OS MIB Reference 53-1001156-01...
Page 837 nodeRNIDManufacturer 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.7 nodeRNIDManufacturer 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.7 Identifies the manufacturer of the node. Fabric OS MIB Reference 53-1001156-01...
Page 838 nodeRNIDManufacturerPlant 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.8 nodeRNIDManufacturerPlant 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.8 Identifies the manufacturer plant of the node. Fabric OS MIB Reference 53-1001156-01...
Page 839 nodeRNIDSequenceNumber 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.9 nodeRNIDSequenceNumber 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.9 Identifies the sequence number of the node. Fabric OS MIB Reference 53-1001156-01...
Page 840 nodeRNIDConnectedPortWWN 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.10 nodeRNIDConnectedPortWWN 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.10 WWN of the connected port. Fabric OS MIB Reference 53-1001156-01...
Page 841 nodeRNIDPortType 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.11 nodeRNIDPortType 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.11 Port type (N, NL, or virtual port) of the connected port. Fabric OS MIB Reference 53-1001156-01...
Page 842 nodeRNIDFormat 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.12 nodeRNIDFormat 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.12 Node identification data format of the connected port. Fabric OS MIB Reference 53-1001156-01...
Page 843 nodeRNIDTag 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.13 nodeRNIDTag 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.13 Node identification tag of the connected port. Fabric OS MIB Reference 53-1001156-01...
Page 844 nodeRNIDParams 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.14 nodeRNIDParams 1.3.6.1.4.1.1588.2.1.1.50.2.2.1.14 Node parameters of the connected port. Fabric OS MIB Reference 53-1001156-01...
Page 845 switchRNIDTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.2.3 switchRNIDTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.2.3 The number of entries in an RNID table that corresponds to the switch. Refer to the Fabric OS Command Reference and the ficonShow command for additional information on FICON MIB tables. Fabric OS MIB Reference 53-1001156-01...
Page 846 switchRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.4 switchRNIDTable 1.3.6.1.4.1.1588.2.1.1.50.2.4 A table that contains RNID information for each switch FICON node. Fabric OS MIB Reference 53-1001156-01...
Page 847 switchRNIDEntry 1.3.6.1.4.1.1588.2.1.1.50.2.4.1 switchRNIDEntry 1.3.6.1.4.1.1588.2.1.1.50.2.4.1 An entry containing the RNID information for the switch FICON node. Fabric OS MIB Reference 53-1001156-01...
Page 848 switchRNIDIndex 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.1 switchRNIDIndex 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.1 Index into switchRNIDTable. Fabric OS MIB Reference 53-1001156-01...
Page 849 switchRNIDSwitchWWN 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.2 switchRNIDSwitchWWN 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.2 WWN of the switch. Fabric OS MIB Reference 53-1001156-01...
Page 850 switchRNIDFlags 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.3 switchRNIDFlags 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.3 RNID flags for the switch. Fabric OS MIB Reference 53-1001156-01...
Page 851 switchRNIDType 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.4 switchRNIDType 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.4 Type Number associated with the switch. Fabric OS MIB Reference 53-1001156-01...
Page 852 switchRNIDModel 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.5 switchRNIDModel 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.5 Model number of the RNID switch. Fabric OS MIB Reference 53-1001156-01...
Page 853 switchRNIDManufacturer 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.6 switchRNIDManufacturer 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.6 Identifies the manufacturer of the switch. Fabric OS MIB Reference 53-1001156-01...
Page 854 switchRNIDManufacturerPlant 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.7 switchRNIDManufacturerPlant 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.7 Identifies the manufacturer plant of the switch. Fabric OS MIB Reference 53-1001156-01...
Page 855 switchRNIDSequenceNumber 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.8 switchRNIDSequenceNumber 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.8 Identifies the sequence number of the switch. Fabric OS MIB Reference 53-1001156-01...
Page 856 switchRNIDTag 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.9 switchRNIDTag 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.9 Identification tag of the switch. Fabric OS MIB Reference 53-1001156-01...
Page 857: Ficonlirr Group
switchRNIDParams 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.10 switchRNIDParams 1.3.6.1.4.1.1588.2.1.1.50.2.4.1.10 Identifies the parameters of the switch. ficonLIRR Group This group contains all Link Incident Record Registration (LIRR) group objects for FICON. Fabric OS MIB Reference 53-1001156-01...
Page 858 LIRRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.3.1 LIRRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.3.1 The number of entries in an LIRR table. Refer to the Fabric OS Command Reference and the ficonShow command for additional information on FICON MIB tables. Fabric OS MIB Reference 53-1001156-01...
Page 859 LIRRTable 1.3.6.1.4.1.1588.2.1.1.50.3.2 LIRRTable 1.3.6.1.4.1.1588.2.1.1.50.3.2 A table that contains LIRR information, one entry for each LIRR incident for an attached FICON device. Fabric OS MIB Reference 53-1001156-01...
Page 860 LIRREntry 1.3.6.1.4.1.1588.2.1.1.50.3.2.1 LIRREntry 1.3.6.1.4.1.1588.2.1.1.50.3.2.1 An entry containing LIRR information. Fabric OS MIB Reference 53-1001156-01...
Page 861 LIRRIndex 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.1 LIRRIndex 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.1 Index into the LIRR table. Fabric OS MIB Reference 53-1001156-01...
Page 862 LIRRListenerPortWWN 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.2 LIRRListenerPortWWN 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.2 WWN of the Listener port. Fabric OS MIB Reference 53-1001156-01...
Page 863 LIRRListenerPID 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.3 LIRRListenerPID 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.3 PID for the Listener port. Fabric OS MIB Reference 53-1001156-01...
Page 864 LIRRRegType 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.4 LIRRRegType 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.4 Registration type: conditional or unconditional. Fabric OS MIB Reference 53-1001156-01...
Page 865 LIRRProtocol 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.5 LIRRProtocol 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.5 Protocol type supported. Fabric OS MIB Reference 53-1001156-01...
Page 866 LIRRPortType 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.6 LIRRPortType 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.6 Attached port type. Fabric OS MIB Reference 53-1001156-01...
Page 867: Ficonrlir Group
LIRRFormat 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.7 LIRRFormat 1.3.6.1.4.1.1588.2.1.1.50.3.2.1.7 Registration type: conditional or unconditional. ficonRLIR Group This group contains all Registered Link Incident Report (RLIR) group objects for FICON. Fabric OS MIB Reference 53-1001156-01...
Page 868 rLIRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.4.1 rLIRTableNumEntries 1.3.6.1.4.1.1588.2.1.1.50.4.1 The number of entries in a switch RLIR table. Refer to the Fabric OS Command Reference and the ficonShow command for additional information on FICON MIB tables. Fabric OS MIB Reference 53-1001156-01...
Page 869 rLIRTable 1.3.6.1.4.1.1588.2.1.1.50.4.2 rLIRTable 1.3.6.1.4.1.1588.2.1.1.50.4.2 A table that contains RLIR information, one entry for each LIRR incident for an attached FICON device. Fabric OS MIB Reference 53-1001156-01...
Page 870 rLIREntry 1.3.6.1.4.1.1588.2.1.1.50.4.2.1 rLIREntry 1.3.6.1.4.1.1588.2.1.1.50.4.2.1 An entry containing RLIR information. Fabric OS MIB Reference 53-1001156-01...
Page 871 rLIRIndex 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.1 rLIRIndex 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.1 Index into the RLIR table. Fabric OS MIB Reference 53-1001156-01...
Page 872 rLIRIncidentPortWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.2 rLIRIncidentPortWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.2 Port WWN for RLIR Incident port. Fabric OS MIB Reference 53-1001156-01...
Page 873 rLIRIncidentNodeWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.3 rLIRIncidentNodeWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.3 Incident node WWN. Fabric OS MIB Reference 53-1001156-01...
Page 874 rLIRIncidentPortType 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.5 rLIRIncidentPortType 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.5 RLIR Incident port type. Fabric OS MIB Reference 53-1001156-01...
Page 875 rLIRIncidentPID 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.6 rLIRIncidentPID 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.6 RLIR Incident PID. Fabric OS MIB Reference 53-1001156-01...
Page 876 rLIRIncidentPortNumber 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.7 rLIRIncidentPortNumber 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.7 RLIR Incident port number. This is a vendor-specific port number. Fabric OS MIB Reference 53-1001156-01...
Page 877 rLIRConnectedPortWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.8 rLIRConnectedPortWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.8 RLIR Connected port WWN. Fabric OS MIB Reference 53-1001156-01...
Page 878 rLIRConnectedNodeWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.9 rLIRConnectedNodeWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.9 RLIR Connected node WWN. Fabric OS MIB Reference 53-1001156-01...
Page 879 rLIRFabricWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.10 rLIRFabricWwn 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.10 RLIR Fabric WWN. Fabric OS MIB Reference 53-1001156-01...
Page 880 rLIRLinkFailureType 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.11 rLIRLinkFailureType 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.11 RLIR Link failure type. Fabric OS MIB Reference 53-1001156-01...
Page 881 rLIRTimeStamp 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.12 rLIRTimeStamp 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.12 RLIR time stamp. Fabric OS MIB Reference 53-1001156-01...
Page 882 rLIRFormat 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.13 rLIRFormat 1.3.6.1.4.1.1588.2.1.1.50.4.2.1.13 RLIR Format. Fabric OS MIB Reference 53-1001156-01...
Page 883: Linkincidentmibtraps Group
linkIncidentMIBTraps Group linkIncidentMIBTraps Group linkIncidentMIBTrapPrefix 1.3.6.1.4.1.1588.2.1.1.50.21.0 The Link Incident traps. Fabric OS MIB Reference 53-1001156-01...
Page 884 linkRNIDDeviceRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.1 linkRNIDDeviceRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.1 A device registered with the switch. Objects 1: nodeRNIDIndex 2: nodeRNIDIncidentPortWWN 3: nodeRNIDConnectedPortWWN Fabric OS MIB Reference 53-1001156-01...
Page 885 linkRNIDDeviceDeRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.2 linkRNIDDeviceDeRegistration 1.3.6.1.4.1.1588.2.1.1.50.21.0.2 A device deregistered with the switch. Objects 1: nodeRNIDIndex 2: nodeRNIDIncidentPortWWN 3: nodeRNIDConnectedPortWWN Fabric OS MIB Reference 53-1001156-01...
Page 886 linkLIRRListenerAdded 1.3.6.1.4.1.1588.2.1.1.50.21.0.3 linkLIRRListenerAdded 1.3.6.1.4.1.1588.2.1.1.50.21.0.3 A listener for link failure incident is added. Objects 1: lIRRListenerPortWWN 2: lIRRListenerPID 3: lIRRIndex Fabric OS MIB Reference 53-1001156-01...
Page 887 linkLIRRListenerRemoved 1.3.6.1.4.1.1588.2.1.1.50.21.0.4 linkLIRRListenerRemoved 1.3.6.1.4.1.1588.2.1.1.50.21.0.4 A listener for link failure incident was removed. Objects 1: lIRRListenerPortWWN 2: lIRRListenerPID 3: lIRRIndex Fabric OS MIB Reference 53-1001156-01...
Page 888 linkRLIRFailureIncident 1.3.6.1.4.1.1588.2.1.1.50.21.0.5 linkRLIRFailureIncident 1.3.6.1.4.1.1588.2.1.1.50.21.0.5 A link failure incident has occurred. The value of lIRRIndex will be -2147483647 and IIRRListenerPID will be 0, if there is no listener for incident. Objects 1: nodeRNIDIndex 2: lIRRIndex 3: rLIRIncidentPortWwn 4: rLIRConnectedPortWwn 5: rLIRIndex 6: rLIRLinkFailureType 7: lIRRListenerPID Fabric OS MIB Reference...
Page 889: Fibrealliance Mib Overview
Chapter FibreAlliance MIB Objects This chapter contains descriptions and other information specific to FibreAlliance MIB (FCMGMT-MIB) object types, including the following: • FibreAlliance MIB Overview........873 •...
Page 890: Fcmgmt-Mib System Organization Of Mib Objects
FibreAlliance MIB Overview FCMGMT-MIB System Organization of MIB Objects Figure 57 Figure 67 depicts the high level organization of the FCMGMT-MIB. - iso - org - dod - internet - experimental - fcmgmt - connSet uNumber 1.3.6.1.3.94.1.1 systemURL 1.3.6.1.3.94.1.2 connUnitTable 1.3.6.1.3.94.1.6 connUnitRevsTable 1.3.6.1.3.94.1.7 connUnitSensorTable 1.3.6.1.3.94.1.8 connUnitPortTable 1.3.6.1.3.94.1.10...
Page 891 FibreAlliance MIB Overview FIGURE 57 FCMGMT-MIB High Level Hierarchy connUnitTable 1.3.6.1.3.94.1.6 connUnitEntry 1.3.6.1.3.94.1.6.1 connUnitId 1.3.6.1.3.94.1.6.1.1 connUnitGlobalId 1.3.6.1.3.94.1.6.1.2 connUnitType 1.3.6.1.3.94.1.6.1.3 connUnitNumports 1.3.6.1.3.94.1.6.1.4 connUnitState 1.3.6.1.3.94.1.6.1.5 connUnitStatus 1.3.6.1.3.94.1.6.1.6 connUnitProduct 1.3.6.1.3.94.1.6.1.7 connUnitSn 1.3.6.1.3.94.1.6.1.8 connUnitUpTime 1.3.6.1.3.94.1.6.1.9 connUnitUrl 1.3.6.1.3.94.1.6.1.10 connUnitDomainId 1.3.6.1.3.94.1.6.1.11 connUnitProxyMaster 1.3.6.1.3.94.1.6.1.12 connUnitPrincipal 1.3.6.1.3.94.1.6.1.13 connUnitNumSensors 1.3.6.1.3.94.1.6.1.14 connUnitStatusChangeTime 1.3.6.1.3.94.1.6.1.15 connUnitConfigurationChangeTime 1.3.6.1.3.94.1.6.1.16 connUnitNumRevs 1.3.6.1.3.94.1.6.1.17...
Page 892 FibreAlliance MIB Overview connUnitPortTable 1.3.6.1.3.94.1.10 connUnitPortEntry 1.3.6.1.3.94.1.10.1 connUnitPortUnitId 1.3.6.1.3.94.1.10.1.1 connUnitPortIndex 1.3.6.1.3.94.1.10.1.2 connUnitPortType 1.3.6.1.3.94.1.10.1.3 connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 connUnitPortState 1.3.6.1.3.94.1.10.1.6 connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8 connUnitPortModuleType 1.3.6.1.3.94.1.10.1.9 connUnitPortWwn 1.3.6.1.3.94.1.10.1.10 connUnitPortFCId 1.3.6.1.3.94.1.10.1.11 connUnitPortSn 1.3.6.1.3.94.1.10.1.12 connUnitPortRevision 1.3.6.1.3.94.1.10.1.13 connUnitPortVendor 1.3.6.1.3.94.1.10.1.14 connUnitPortSpeed 1.3.6.1.3.94.1.10.1.15 connUnitPortControl 1.3.6.1.3.94.1.10.1.16 connUnitPortName 1.3.6.1.3.94.1.10.1.17 connUnitPortPhysicalNumber 1.3.6.1.3.94.1.10.1.18 connUnitPortStatObject 1.3.6.1.3.94.1.10.1.19 connUnitPortProtocolCap 1.3.6.1.3.94.1.10.1.20...
Page 893 FibreAlliance MIB Overview connUnitLinkTable 1.3.6.1.3.94.1.12 connUnitLinkEntry 1.3.6.1.3.94.1.12.1 connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 connUnitLinkNodeIdX 1.3.6.1.3.94.1.12.1.3 connUnitLinkPortNumberX 1.3.6.1.3.94.1.12.1.4 connUnitLinkPortWwnX 1.3.6.1.3.94.1.12.1.5 connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6 connUnitLinkPortNumberY 1.3.6.1.3.94.1.12.1.7 connUnitLinkPortWwnY 1.3.6.1.3.94.1.12.1.8 connUnitLinkAgentAddressY 1.3.6.1.3.94.1.12.1.9 connUnitLinkAgentAddressTypeY 1.3.6.1.3.94.1.12.1.10 connUnitLinkAgentPortY 1.3.6.1.3.94.1.12.1.11 connUnitLinkUnitTypeY 1.3.6.1.3.94.1.12.1.12 connUnitLinkConnIdY 1.3.6.1.3.94.1.12.1.13 connUnitLinkCurrIndex 1.3.6.1.3.94.1.12.1.14 FIGURE 63 ConnUnitLinkTable Hierarchy trapRegTable 1.3.6.1.3.94.2.3 trapRegEntry 1.3.6.1.3.94.2.3.1 trapRegIpAddress 1.3.6.1.3.94.2.3.1.1 trapRegPort 1.3.6.1.3.94.2.3.1.2...
Page 894 FibreAlliance MIB Overview connUnitPortStatTable 1.3.6.1.3.94.4.5 connUnitPortStatEntry 1.3.6.1.3.94.4.5.1 connUnitPortStatUnitId 1.3.6.1.3.94.4.5.1.1 connUnitPortStatIndex 1.3.6.1.3.94.4.5.1.2 connUnitPortStatCountError 1.3.6.1.3.94.4.5.1.3 connUnitPortStatCountTxObjects 1.3.6.1.3.94.4.5.1.4 connUnitPortStatCountRxObjects 1.3.6.1.3.94.4.5.1.5 connUnitPortStatCountTxElements 1.3.6.1.3.94.4.5.1.6 connUnitPortStatCountRxElements 1.3.6.1.3.94.4.5.1.7 connUnitPortStatCountBBCreditZero 1.3.6.1.3.94.4.5.1.8 connUnitPortStatCountInputBuffersFull 1.3.6.1.3.94.4.5.1.9 connUnitPortStatCountFBSYFrames 1.3.6.1.3.94.4.5.1.10 connUnitPortStatCountPBSYFrames 1.3.6.1.3.94.4.5.1.11 connUnitPortStatCountFRJTFrames 1.3.6.1.3.94.4.5.1.12 connUnitPortStatCountPRJTFrames 1.3.6.1.3.94.4.5.1.13 connUnitPortStatCountClass1RxFrames 1.3.6.1.3.94.4.5.1.14 connUnitPortStatCountClass1TxFrames 1.3.6.1.3.94.4.5.1.15 connUnitPortStatCountClass1FBSYFrames 1.3.6.1.3.94.4.5.1.16 connUnitPortStatCountClass1PBSYFrames 1.3.6.1.3.94.4.5.1.17 connUnitPortStatCountClass1FRJTFrames 1.3.6.1.3.94.4.5.1.18 connUnitPortStatCountClass1PRJTFrames 1.3.6.1.3.94.4.5.1.19 connUnitPortStatCountClass2RxFrames 1.3.6.1.3.94.4.5.1.20...
Page 895: Definitions For Fcmgmt-Mib
FibreAlliance MIB Overview - connUnitServiceSet - connUnitServiceScalars connUnitSnsMaxEntry 1.3.6.1.3.94.5.1.1 FIGURE 66 ConnUnitServiceScalars Hierarchy - connUnitServiceSet - connUnitServiceTables connUnitSnsTable 1.3.6.1.3.94.5.2.1 connUnitSnsEntry 1.3.6.1.3.94.5.2.1.1 connUnitSnsId 1.3.6.1.3.94.5.2.1.1.1 connUnitSnsPortIndex 1.3.6.1.3.94.5.2.1.1.2 connUnitSnsPortIdentifier 1.3.6.1.3.94.5.2.1.1.3 connUnitSnsPortName 1.3.6.1.3.94.5.2.1.1.4 connUnitSnsNodeName 1.3.6.1.3.94.5.2.1.1.5 connUnitSnsClassOfSvc 1.3.6.1.3.94.5.2.1.1.6 connUnitSnsNodeIPAddress 1.3.6.1.3.94.5.2.1.1.7 connUnitSnsProcAssoc 1.3.6.1.3.94.5.2.1.1.8 connUnitSnsFC4Type 1.3.6.1.3.94.5.2.1.1.9 connUnitSnsPortType 1.3.6.1.3.94.5.2.1.1.10 connUnitSnsPortIPAddress 1.3.6.1.3.94.5.2.1.1.11 connUnitSnsFabricPortName 1.3.6.1.3.94.5.2.1.1.12 connUnitSnsHardAddress 1.3.6.1.3.94.5.2.1.1.13...
Page 896 FibreAlliance MIB Overview TABLE 20 Definitions for FCMGMT-MIB Type Definition Value Description FcEventSeverity Integer 1 (unknown) 2 (emergency) Emergency status. 3 (alert) Alert status. 4 (critical) Critical status. 5 (error) Error status. 6 (warning) Warning status. 7 (notify) Notification status. 8 (info) Informational status.
Page 897: Connset Group
ConnSet Group ConnSet Group Implementation of the Connectivity group is mandatory for all systems. Fabric OS MIB Reference 53-1001156-01...
Page 898 uNumber 1.3.6.1.3.94.1.1 uNumber 1.3.6.1.3.94.1.1 The number of connectivity units present on this system (represented by this agent). Might be a count of the boards in a chassis or the number of full boxes in a rack. The connectivity unit is mapped to a switch. uNumber is always set to 1. Fabric OS MIB Reference 53-1001156-01...
Page 899 systemURL 1.3.6.1.3.94.1.2 systemURL 1.3.6.1.3.94.1.2 The top-level URL of the system; if it does not exist, the value is an empty string. The URL format is implementation dependant and can have keywords embedded that are preceded by a percent sign (for example, %USER). The following are the defined keywords that are recognized and replaced with data during a launch.
Page 900 connUnitTable 1.3.6.1.3.94.1.6 connUnitTable 1.3.6.1.3.94.1.6 A list of units under a single SNMP agent. The number of entries is given by the value of uNumber. The value is 1 for stand-alone system. Fabric OS MIB Reference 53-1001156-01...
Page 901 connUnitEntry 1.3.6.1.3.94.1.6.1 connUnitEntry 1.3.6.1.3.94.1.6.1 A connectivity unit entry containing objects for a particular unit. Index connUnitId Fabric OS MIB Reference 53-1001156-01...
Page 902 connUnitId 1.3.6.1.3.94.1.6.1.1 connUnitId 1.3.6.1.3.94.1.6.1.1 The unique identification for this connectivity unit among those within this proxy domain. The value must be unique within the proxy domain because it is the index variable for connUnitTable. The value assigned to a given connectivity unit should be persistent across agent and unit resets. It should be the same as connUnitGlobalId if connUnitGlobalId is known and stable.
Page 903 connUnitGlobalId 1.3.6.1.3.94.1.6.1.2 connUnitGlobalId 1.3.6.1.3.94.1.6.1.2 An optional global-scope identifier for this connectivity unit. It must be a WWN for this connectivity unit or 16 octets of value 0. The following characteristics are required. • WWN formats requiring fewer than 16 octets must be extended to 16 octets with trailing 0 octets.
Page 904 connUnitType 1.3.6.1.3.94.1.6.1.3 connUnitType 1.3.6.1.3.94.1.6.1.3 The type of this connectivity unit. Set to 4 for Fibre Channel switches or to 14 for Brocade Access Gateway. Fabric OS MIB Reference 53-1001156-01...
Page 905 connUnitNumports 1.3.6.1.3.94.1.6.1.4 connUnitNumports 1.3.6.1.3.94.1.6.1.4 Number of physical ports (between 0 and the maximum number of system supported ports) in the connectivity unit (internal/embedded, external). To determine the maximum number of system supported ports, use the SNMP GET command on swFcPortCapacity. The Brocade switches support 0 to maximum number of system supported ports.
Page 906 connUnitState 1.3.6.1.3.94.1.6.1.5 connUnitState 1.3.6.1.3.94.1.6.1.5 Overall state of the connectivity unit. Values Possible values are: • unknown (1) • online (2) Set the state to online. • offline (3) Set the state to offline. Mapped as follows: switchState(ONLINE) 2 (online) switchState(not ONLINE) 3 (offline, testing, faulty) Fabric OS MIB Reference 53-1001156-01...
Page 907 connUnitStatus 1.3.6.1.3.94.1.6.1.6 connUnitStatus 1.3.6.1.3.94.1.6.1.6 Overall status of the connectivity unit. Values Possible values are: • unknown (1) • unused (2) • ok (3) • warning (4) - Needs attention. • failed (5) switchStatus maps directly as follows: connUnitStatus switchStatus 1 (unknown) Unknown 2 (unused) Unmonitored 3 (ok) Healthy/ok 4 (warning) Marginal/Warning...
Page 908 connUnitProduct 1.3.6.1.3.94.1.6.1.7 connUnitProduct 1.3.6.1.3.94.1.6.1.7 The connectivity unit vendor's product model name. This is the same as for sysDescr (set for as many as 79 bytes). If the switch is in Access Gateway mode, the default value is Access Gateway. Fabric OS MIB Reference 53-1001156-01...
Page 909 connUnitSn 1.3.6.1.3.94.1.6.1.8 connUnitSn 1.3.6.1.3.94.1.6.1.8 The serial number for this connectivity unit. Set to the SSN (which by default is the WWN). Fabric OS MIB Reference 53-1001156-01...
Page 910 connUnitUpTime 1.3.6.1.3.94.1.6.1.9 connUnitUpTime 1.3.6.1.3.94.1.6.1.9 The number of centiseconds since the last unit initialization. Set when connUnitTable is initialized. Fabric OS MIB Reference 53-1001156-01...
Page 911 connUnitUrl 1.3.6.1.3.94.1.6.1.10 connUnitUrl 1.3.6.1.3.94.1.6.1.10 URL to launch a management application, if applicable; otherwise an empty string. In a standalone unit, this would be the same as the top-level URL. This has the same definition as systemURL for keywords. (Same as systemURL.) The expected value for connUnitURL.0 is: “http://{a.b.c.d}”...
Page 912 connUnitDomainId 1.3.6.1.3.94.1.6.1.11 connUnitDomainId 1.3.6.1.3.94.1.6.1.11 24-bit Fibre Channel address ID of this connectivity unit, right-justified with leading 0s if required. If this value is not applicable, return all bits to 1. Set to the switch domain ID (as per FC-SW). For a Brocade Access Gateway device, the value is hard coded as “11 11 11”. A Brocade Access Gateway does not have a domain ID.
Page 913 connUnitProxyMaster 1.3.6.1.3.94.1.6.1.12 connUnitProxyMaster 1.3.6.1.3.94.1.6.1.12 A value of “yes” means this is the proxy master unit for a set of managed units. Values Possible values are: • unknown (1) • no (2) • yes (3) This could be the only unit with a management card in it for a set of units. A standalone unit should return “yes”...
Page 914 connUnitPrincipal 1.3.6.1.3.94.1.6.1.13 connUnitPrincipal 1.3.6.1.3.94.1.6.1.13 Indicates whether this connectivity unit is the principal unit within the group of fabric elements. If this value is not applicable, it returns “unknown.” If the switch is principal, this is set to 3 (yes); otherwise, for a fabric switch it is set to 2 (no). For a Brocade Access Gateway device, since the switch is behaving as a device management tool and not a Fibre Channel switch, the value is set to 1 (unknown).
Page 915 connUnitNumSensors 1.3.6.1.3.94.1.6.1.14 connUnitNumSensors 1.3.6.1.3.94.1.6.1.14 Number of sensors (between 0 and maximum number of sensors) in the connUnitSensorTable. Refer to Table 14 on page 552 for specific sensor counts on the various switches. Fabric OS MIB Reference 53-1001156-01...
Page 916 connUnitStatusChangeTime 1.3.6.1.3.94.1.6.1.15 connUnitStatusChangeTime 1.3.6.1.3.94.1.6.1.15 The sysuptime time stamp (in centiseconds) at which the last status change occurred for any members of the set; this is the latest time stamp that connUnitStatus or connUnitPortStatus changed. Not supported. Fabric OS MIB Reference 53-1001156-01...
Page 917 connUnitConfigurationChangeTime 1.3.6.1.3.94.1.6.1.16 connUnitConfigurationChangeTime 1.3.6.1.3.94.1.6.1.16 The sysuptime time stamp (in centiseconds) at which the last configuration change occurred for any members of the set. In other words, this is the latest time stamp of flash memory update. This represents a union of change information for connUnitConfigurationChangeTime Not supported.
Page 918 connUnitNumRevs 1.3.6.1.3.94.1.6.1.17 connUnitNumRevs 1.3.6.1.3.94.1.6.1.17 The number of revisions in connUnitRevsTable. Set to 2. Fabric OS MIB Reference 53-1001156-01...
Page 919 connUnitNumZones 1.3.6.1.3.94.1.6.1.18 connUnitNumZones 1.3.6.1.3.94.1.6.1.18 Number of zones defined in connUnitZoneTable. Not supported. Fabric OS MIB Reference 53-1001156-01...
Page 920 connUnitModuleId 1.3.6.1.3.94.1.6.1.19 connUnitModuleId 1.3.6.1.3.94.1.6.1.19 This is a unique ID, persistent between boots, that can be used to group a set of connUnits together into a module. The intended use would be to create a connUnit with a connUnitType of “module” to represent a physical or logical group of connectivity units.
Page 921 connUnitName 1.3.6.1.3.94.1.6.1.20 connUnitName 1.3.6.1.3.94.1.6.1.20 A display string containing a name for this connectivity unit. This object value should be persistent between boots. Set to switchName/sysName. Fabric OS MIB Reference 53-1001156-01...
Page 922 connUnitInfo 1.3.6.1.3.94.1.6.1.21 connUnitInfo 1.3.6.1.3.94.1.6.1.21 A display string containing information about this connectivity unit. This object value should be persistent between boots. For a fabric switch set to sysDescr and read-only. For a Brocade Access Gateway device set to “Access Gateway.” Fabric OS MIB Reference 53-1001156-01...
Page 923 connUnitControl 1.3.6.1.3.94.1.6.1.22 connUnitControl 1.3.6.1.3.94.1.6.1.22 Controls the addressed connUnit. Each implementation might choose not to allow any or all of these values on a SET. Cold start and warm start are as defined in MIB-II and are not meant to be a factory reset. This is similar to swAdmStatus: resetConnunitColdStart = reboot resetConnunitWarmStart = fastboot...
Page 924 connUnitContact 1.3.6.1.3.94.1.6.1.23 connUnitContact 1.3.6.1.3.94.1.6.1.23 Contact information for this connectivity unit. Displays the same value as sysContact. Changing the value in this variable causes the value in sysContact to also be changed. Fabric OS MIB Reference 53-1001156-01...
Page 925 connUnitLocation 1.3.6.1.3.94.1.6.1.24 connUnitLocation 1.3.6.1.3.94.1.6.1.24 Location information for this connectivity unit. Displays the same value as sysLocation. Fabric OS MIB Reference 53-1001156-01...
Page 926 connUnitEventFilter 1.3.6.1.3.94.1.6.1.25 connUnitEventFilter 1.3.6.1.3.94.1.6.1.25 Defines the event severity logged by this connectivity unit. All events of severity less than or equal to connUnitEventFilter are logged in connUnitEventTable. Return Always returns value 9 (debug). Fabric OS MIB Reference 53-1001156-01...
Page 927 connUnitNumEvents 1.3.6.1.3.94.1.6.1.26 connUnitNumEvents 1.3.6.1.3.94.1.6.1.26 Number of events currently in connUnitEventTable. Values For Fabric OS v3.0 this value ranges from 0 to 64. For Fabric OS v4.0 this value ranges from 0 to 255. For Fabric OS v4.2 this value ranges from 0 to 2048. For Fabric OS v4.4 this value ranges from 0 to 1024.
Page 928 connUnitMaxEvents 1.3.6.1.3.94.1.6.1.27 connUnitMaxEvents 1.3.6.1.3.94.1.6.1.27 Maximum number of events that can be defined in connUnitEventTable. Values For Fabric OS v3.0 this value is 64. For Fabric OS v4.0 this value is 255. For Fabric OS v4.2 this value is 2048. For Fabric OS v4.4 this value is 1024. For Fabric OS v5.0.1 this value is 1024.
Page 929 connUnitEventCurrID 1.3.6.1.3.94.1.6.1.28 connUnitEventCurrID 1.3.6.1.3.94.1.6.1.28 The last-used event ID (connUnitEventId). Maximum is 2147483647 (2 -1). Fabric OS MIB Reference 53-1001156-01...
Page 930 connUnitRevsTable 1.3.6.1.3.94.1.7 connUnitRevsTable 1.3.6.1.3.94.1.7 Table of the revisions supported by connectivity units managed by this agent. Usage Notes This table lists the versions of hardware and software elements in the switch. One entry for the hardware platform version and another entry for the Fabric OS version. For example, for the Brocade 4100 the hardware platform number is 32.0.
Page 931 connUnitRevsEntry 1.3.6.1.3.94.1.7.1 connUnitRevsEntry 1.3.6.1.3.94.1.7.1 Table of the revisions supported by connectivity units managed by this agent. Index connUnitRevsUnitId connUnitRevsIndex Fabric OS MIB Reference 53-1001156-01...
Page 932 connUnitRevsUnitId 1.3.6.1.3.94.1.7.1.1 connUnitRevsUnitId 1.3.6.1.3.94.1.7.1.1 The connUnitId value for the connectivity unit that contains this revision table. Fabric OS MIB Reference 53-1001156-01...
Page 933 connUnitRevsIndex 1.3.6.1.3.94.1.7.1.2 connUnitRevsIndex 1.3.6.1.3.94.1.7.1.2 A unique value among all connUnitRevsEntrys with the same value of connUnitRevsUnitId, in the range between 1 and connUnitNumRevs. Index 1 returns the hardware version. Index 2 returns the software version. Fabric OS MIB Reference 53-1001156-01...
Page 934 connUnitRevsRevId 1.3.6.1.3.94.1.7.1.3 connUnitRevsRevId 1.3.6.1.3.94.1.7.1.3 A vendor-specific string identifying a revision of a component of the connUnit indexed by connUnitRevsUnitId. Index 1 returns the switchType from switchShow. Index 2 returns the Fabric OS version from telnet command version: for example, v2.6. Fabric OS MIB Reference 53-1001156-01...
Page 935 connUnitRevsDescription 1.3.6.1.3.94.1.7.1.4 connUnitRevsDescription 1.3.6.1.3.94.1.7.1.4 Description of a component to which the revision corresponds. Index 1 returns the hardware version. Index 2 returns the software version. Fabric OS MIB Reference 53-1001156-01...
Page 936 connUnitSensorTable 1.3.6.1.3.94.1.8 connUnitSensorTable 1.3.6.1.3.94.1.8 Table of the sensors supported by each connectivity unit managed by this agent. Refer to Table 14 on page 552 for specific sensor counts on the various switches. Fabric OS MIB Reference 53-1001156-01...
Page 937 connUnitSensorEntry 1.3.6.1.3.94.1.8.1 connUnitSensorEntry 1.3.6.1.3.94.1.8.1 Each entry contains the information for a specific sensor. Index connUnitSensorUnitId connUnitSensorIndex Fabric OS MIB Reference 53-1001156-01...
Page 938 connUnitSensorUnitId 1.3.6.1.3.94.1.8.1.1 connUnitSensorUnitId 1.3.6.1.3.94.1.8.1.1 The connUnitId value of the connectivity unit that contains this sensor table. Set to connUnitId. Fabric OS MIB Reference 53-1001156-01...
Page 939 connUnitSensorIndex 1.3.6.1.3.94.1.8.1.2 connUnitSensorIndex 1.3.6.1.3.94.1.8.1.2 A unique value among all connUnitSensorEntrys with the same value of connUnitSensorUnitId, in the range between 1 and the return value from connUnitNumSensor. Fabric OS MIB Reference 53-1001156-01...
Page 940 connUnitSensorName 1.3.6.1.3.94.1.8.1.3 connUnitSensorName 1.3.6.1.3.94.1.8.1.3 A textual identification of the sensor, intended primarily for operator use. Each contains the name of sensor in textual format: for example, Temp #1, Fan #2, and so on. Fabric OS MIB Reference 53-1001156-01...
Page 941 connUnitSensorStatus 1.3.6.1.3.94.1.8.1.4 connUnitSensorStatus 1.3.6.1.3.94.1.8.1.4 The status indicated by the sensor. Values Possible values are: • unknown (1) • other (2) • ok (3) The sensor indicates okay. • Warning (4) The sensor indicates a warning. • failed (5) The sensor indicates failure. •...
Page 942 connUnitSensorInfo 1.3.6.1.3.94.1.8.1.5 connUnitSensorInfo 1.3.6.1.3.94.1.8.1.5 Miscellaneous static information about the sensor, such as its serial number. Each contains textual information about the sensor. Return Returns the serial ID if this is for the power supply; otherwise, returns Null. Fabric OS MIB Reference 53-1001156-01...
Page 943 connUnitSensorMessage 1.3.6.1.3.94.1.8.1.6 connUnitSensorMessage 1.3.6.1.3.94.1.8.1.6 This describes the status of the sensor as a message. It may also provide some information about the sensor, for example: sensor 1: type 3 is OK, value is 33 Each contains the sensor status (and reading if applicable) in textual format. Fabric OS MIB Reference 53-1001156-01...
Page 944 connUnitSensorType 1.3.6.1.3.94.1.8.1.7 connUnitSensorType 1.3.6.1.3.94.1.8.1.7 The type of component being monitored by this sensor. Values Possible values are: • unknown (1) • other (2) • battery (3) • fan (4) • power-supply (5) • transmitter (6) • enclosure (7) • board (8) •...
Page 945 connUnitSensorCharacteristic 1.3.6.1.3.94.1.8.1.8 connUnitSensorCharacteristic 1.3.6.1.3.94.1.8.1.8 The characteristics being monitored by this sensor. The following mapping is for each individual sensor, where applicable: swSensorType connUnitSensorCharacteristic 1 (temperature) 3 (temperature) 2 (fan) 7 (airflow) 3 (power supply) 9 (power) Values Possible values are: •...
Page 946 connUnitPortTable 1.3.6.1.3.94.1.10 connUnitPortTable 1.3.6.1.3.94.1.10 Generic information on ports for a specific connUnit NOTE Information about the GbE ports on a Brocade 7500 or FR4-18i blade is not supported. Fabric OS MIB Reference 53-1001156-01...
Page 947 connUnitPortEntry 1.3.6.1.3.94.1.10.1 connUnitPortEntry 1.3.6.1.3.94.1.10.1 Each entry contains the information for a specific port. Index connUnitPortUnitId connUnitPortIndex Fabric OS MIB Reference 53-1001156-01...
Page 948 connUnitPortUnitId 1.3.6.1.3.94.1.10.1.1 connUnitPortUnitId 1.3.6.1.3.94.1.10.1.1 The connUnitId value of the connectivity unit that contains this port. Same value as connUnitId. Fabric OS MIB Reference 53-1001156-01...
Page 949 connUnitPortIndex 1.3.6.1.3.94.1.10.1.2 connUnitPortIndex 1.3.6.1.3.94.1.10.1.2 Number of physical ports between 0 and maximum number of system supported ports in the connectivity unit (internal/embedded, external). To determine the maximum number of system supported ports, use the SNMP GET command on swFcPortCapacity. The Brocade switches support 0 to maximum number of system supported ports. The maximum number of supported ports are as follows: Brocade 3200, 3250 8 ports...
Page 950 connUnitPortType 1.3.6.1.3.94.1.10.1.3 connUnitPortType 1.3.6.1.3.94.1.10.1.3 The port type. For EX_Port, VEX_Port and VE_Port, the port type will be shown as other. For a Brocade Access Gateway device, the port type can be either F_Port (f-port) or N_Port (n-port) only. Values Possible values are: •...
Page 951 connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4 Bit mask that specifies the classes of service capability of this port. If this is not applicable, return all bits set to 0. The bits have the following definition: • unknown 0 • class-f 1 • class-one 2 •...
Page 952 connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 Bit mask that specifies the classes of service that are currently operational. If this is not applicable, return all bits set to 0. This object has the same definition as connUnitPortFCClassCap. For an F_Port or FL_Port, this value is 0x000C. For a G_Port or E_Port, this value is 0x000D. For a Brocade Access Gateway both the F_Port and N_Port this value is 0x0008.
Page 953 connUnitPortState 1.3.6.1.3.94.1.10.1.6 connUnitPortState 1.3.6.1.3.94.1.10.1.6 The state of the port hardware. Values Possible values are: • unavailable (1) Do not use. • online (2) Available for meaningful work. • offline (3) Not available for meaningful work. • bypassed (4) No longer used. •...
Page 954 connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 An overall protocol status for the port. For a U_Port, the status should be ols (9). Values Possible values are: • unknown (1) • unused (2) Device cannot report this status. • ready (3) FCAL Loop or FCPH Link reset protocol initialization has completed. •...
Page 955 connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8 connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8 The technology of the port transceiver. Values Possible values are: • unknown (1) • other (2) • unused (3) • shortwave (4) • longwave (5) • copper (6) • scsi (7) • longwaveNoOFC (8) • shortwaveNoOFC (9) •...
Page 956 connUnitPortModuleType 1.3.6.1.3.94.1.10.1.9 connUnitPortModuleType 1.3.6.1.3.94.1.10.1.9 The module type of the port connector. Values Possible values are: • unknown (1) • other (2) • gbic (3) • embedded (4) Fixed (oneXnine) • glm (5) • gbicSerialId (6) • gbicNoSerialId (7) • gbicNotInstalled (8) •...
Page 957 connUnitPortWwn 1.3.6.1.3.94.1.10.1.10 connUnitPortWwn 1.3.6.1.3.94.1.10.1.10 The World Wide Name of the port, if applicable; otherwise, an empty string. This is in IEEE Extended format, and the extension contains the internal port number of each port. NOTE The internal port number is 1 less than the port index. For example, if the switch has WWN 10:00:00:60:69:10:02:18, then port numbers 0 and 6 have WWN 20:00:00:60:69:10:02:18 and 20:06:00:60:69:10:02:18, respectively.
Page 958 connUnitPortFCId 1.3.6.1.3.94.1.10.1.11 connUnitPortFCId 1.3.6.1.3.94.1.10.1.11 This is the assigned Fibre Channel ID of this port. This value is expected to be a Big Endian value of 24 bits. If this is a loop, then it is the AL_PA that is connected. If this is an E_Port, then it contains only the domain ID, left justified, 0 filled.
Page 959 connUnitPortSn 1.3.6.1.3.94.1.10.1.12 connUnitPortSn 1.3.6.1.3.94.1.10.1.12 The serial number of the unit (for example, for a GBIC). If this is not applicable, return an empty string. If the GBIC has a serial ID, the return value is the GBIC part number; otherwise, the return value is Null.
Page 960 connUnitPortRevision 1.3.6.1.3.94.1.10.1.13 connUnitPortRevision 1.3.6.1.3.94.1.10.1.13 The port revision (for example, GBIC). Return If the GBIC has a serial ID, this returns the GBIC revision number; otherwise, it returns a Null value. Fabric OS MIB Reference 53-1001156-01...
Page 961 connUnitPortVendor 1.3.6.1.3.94.1.10.1.14 connUnitPortVendor 1.3.6.1.3.94.1.10.1.14 The port vendor (for example, for a GBIC). Return If the GBIC has a serial ID, this returns the GBIC vendor name; otherwise, it returns a Null value. Fabric OS MIB Reference 53-1001156-01...
Page 962 connUnitPortSpeed 1.3.6.1.3.94.1.10.1.15 connUnitPortSpeed 1.3.6.1.3.94.1.10.1.15 The speed of the port, in kilobytes per second. For example, the valid values for Brocade 12000, 24000, and 48000 directors: 125,000 KBps, 250,000 KBps, or 500,000 KBps depending on the configuration. Fabric OS MIB Reference 53-1001156-01...
Page 963 connUnitPortControl 1.3.6.1.3.94.1.10.1.16 connUnitPortControl 1.3.6.1.3.94.1.10.1.16 Controls the addressed connUnit’s port. Valid commands are: • resetConnUnitPort If the addressed connUnit allows this operation to be performed to this port, the addressed port performs a vendor-specific reset operation. Examples of these operations are: •...
Page 964 connUnitPortControl 1.3.6.1.3.94.1.10.1.16 • Addition of the port from an arbitrated loop by a hub. Each implementation might choose not to allow any or all of these values on a SET. If the management station uses in-band communication (FC-IP) with the switch, either of the two following actions might result in a loss of in-band communication with the switch.
Page 965 connUnitPortName 1.3.6.1.3.94.1.10.1.17 connUnitPortName 1.3.6.1.3.94.1.10.1.17 A string describing the addressed port. This object is read-only for Brocade switches. Fabric OS MIB Reference 53-1001156-01...
Page 966 connUnitPortPhysicalNumber 1.3.6.1.3.94.1.10.1.18 connUnitPortPhysicalNumber 1.3.6.1.3.94.1.10.1.18 This is the internal port number by which this port is known. In many implementations, this should be the same as connUnitPortIndex. Some implementations might have an internal port representation not compatible with the rules for table indices. In these cases, provide the internal representation of this port in this object.
Page 967 connUnitPortStatObject 1.3.6.1.3.94.1.10.1.19 connUnitPortStatObject 1.3.6.1.3.94.1.10.1.19 This OID is depricated. This contains the OID of the first object of the table that contains the statistics for this particular port. If this has a value of 0, then there are no statistics available for this port. The port type information helps identify the statistics objects found in the table.
Page 968 connUnitPortProtocolCap 1.3.6.1.3.94.1.10.1.20 connUnitPortProtocolCap 1.3.6.1.3.94.1.10.1.20 Not supported in Fabric OS v2.6.1. This is the bit mask that specifies the driver-level protocol capability of this port. If this is not applicable, return all bits set to 0. Return value = 07F The bits have the following definition. •...
Page 969 connUnitPortProtocolOp 1.3.6.1.3.94.1.10.1.21 connUnitPortProtocolOp 1.3.6.1.3.94.1.10.1.21 Not supported in Fabric OS v2.6.1.Supported in v5.x, v6.0. This is the bit mask that specifies the driver level protocol(s) that are currently operational. Return value = 07F If this is not applicable, return all bits set to zero. The bits have the following definition: •...
Page 970 connUnitPortNodeWwn 1.3.6.1.3.94.1.10.1.22 connUnitPortNodeWwn 1.3.6.1.3.94.1.10.1.22 Not supported in Fabric OS v2.6.1. Supported in v5.x, v6.0. The node World Wide Name of the port, if applicable; otherwise, an empty string. All related ports in within a group should have the same node WWN value. The container is defined as the largest physical entity.
Page 971 connUnitPortHWState 1.3.6.1.3.94.1.10.1.23 connUnitPortHWState 1.3.6.1.3.94.1.10.1.23 Not supported in Fabric OS v2.6.1. The state of the port as detected by the hardware. Values Possible values are: • unknown (1) • failed (2) Port failed diagnostics (port_flt_state). • bypassed (3) FCAL bypass, loop only (not used). •...
Page 972 connUnitEventTable 1.3.6.1.3.94.1.11 connUnitEventTable 1.3.6.1.3.94.1.11 The table of connectivity unit events. Errors, warnings, and information should be reported in this table. • (v3.0 only) This table contains the 64 most-recent event log entries. • (v4.0 only) This table contains the 255 most-recent event log entries. •...
Page 973 connUnitEventEntry 1.3.6.1.3.94.1.11.1 connUnitEventEntry 1.3.6.1.3.94.1.11.1 Each entry contains information on a specific event for the given connectivity unit. Index connUnitEventUnitId connUnitEventIndex Fabric OS MIB Reference 53-1001156-01...
Page 974 connUnitEventUnitId 1.3.6.1.3.94.1.11.1.1 connUnitEventUnitId 1.3.6.1.3.94.1.11.1.1 The connUnitId of the connectivity unit that contains this event table. Same as connUnitId. Fabric OS MIB Reference 53-1001156-01...
Page 975 connUnitEventIndex 1.3.6.1.3.94.1.11.1.2 connUnitEventIndex 1.3.6.1.3.94.1.11.1.2 Each connectivity unit has its own event buffer. As it wraps, it might write over previous events. This object is an index into the buffer. It is recommended that this table is read using “getNext”s to retrieve the initial table.
Page 976 connUnitEventId 1.3.6.1.3.94.1.11.1.3 connUnitEventId 1.3.6.1.3.94.1.11.1.3 The internal event ID. Incriminated for each event, ranging between 0 and connUnitMaxEvents. Not used as table index to simplify the agent implementation. When this reaches the end of the range specified by connUnitMaxEvents, the ID rolls over to start at 0. This value is set back to 0 at reset. The relationship of this value to the index is that internal event ID might represent a smaller number than a 32-bit integer (for example, maximum 100 entries) and would only have a value range up to connUnitMaxEvents.
Page 977 connUnitREventTime 1.3.6.1.3.94.1.11.1.4 connUnitREventTime 1.3.6.1.3.94.1.11.1.4 This is the real time when the event occurred. It has the following format. DDMMYYYY HHMMSS Where: DD = day number MM = month number YYYY = year HH = hours MM = minutes SS = seconds If not applicable, returns a null string.
Page 978 connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 connUnitSEventTime 1.3.6.1.3.94.1.11.1.5 This is the sysuptime time stamp when the event occurred. Fabric OS MIB Reference 53-1001156-01...
Page 979 connUnitEventSeverity 1.3.6.1.3.94.1.11.1.6 connUnitEventSeverity 1.3.6.1.3.94.1.11.1.6 The event severity level. The mapping between errorlog severity level and this variable is: Error log FA-MIB none (0) unknown (1) Critical (1) critical (4) Error (2) error (5) Warning (3) warning (6) Informational (4) info (8) Debug (5) debug (9) Refer to FcEventSeverity in...
Page 980 connUnitEventType 1.3.6.1.3.94.1.11.1.7 connUnitEventType 1.3.6.1.3.94.1.11.1.7 The type of this event. Values Possible values are: • unknown (1) • other (2) • status (3) • configuration (4) • topology (5) Always set to 2 (other). Fabric OS MIB Reference 53-1001156-01...
Page 981 connUnitEventObject 1.3.6.1.3.94.1.11.1.8 connUnitEventObject 1.3.6.1.3.94.1.11.1.8 This is used with the connUnitEventType to identify to which object the event refers. It can be the OID of a connectivity unit or of another object, like connUnitPortStatus[...]. Values Always set to null. Fabric OS MIB Reference 53-1001156-01...
Page 982 connUnitEventDescr 1.3.6.1.3.94.1.11.1.9 connUnitEventDescr 1.3.6.1.3.94.1.11.1.9 The description of the event. Same as the string displayed in the system error log. The system error log can be viewed using the errShow or errDump commands. For Fabric OS v6.2.0, the format of error messages has changed. This field now uses the message title and number (for example, WEBD-1006) and the message text.
Page 983 connUnitLinkTable 1.3.6.1.3.94.1.12 connUnitLinkTable 1.3.6.1.3.94.1.12 A list of links known to this agent from this connectivity unit to other connectivity units- X is switch data and Y is other end. The link table is intended to organize and communicate any information the agent has that might assist a management application to discover the connectivity units in the framework and the topology of their interconnect- the goal is to assist the management application by mapping the elements of the framework in addition to listing them.
Page 984 connUnitLinkEntry 1.3.6.1.3.94.1.12.1 connUnitLinkEntry 1.3.6.1.3.94.1.12.1 An entry describing a particular link to another. Index connUnitLinkUnitId connUnitLinkIndex Fabric OS MIB Reference 53-1001156-01...
Page 985 connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 The connUnitId of the connectivity unit that contains this link table. Values Set to WWN of the local switch. Fabric OS MIB Reference 53-1001156-01...
Page 986 connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 This value is used to create a unique value for each entry in the link table with the same connUnitLinkUnitId. The value can only be reused if it is not currently in use and the value is the next candidate to be used.
Page 987 connUnitLinkNodeIdX 1.3.6.1.3.94.1.12.1.3 connUnitLinkNodeIdX 1.3.6.1.3.94.1.12.1.3 The node WWN of the unit at one end of the link. If the node WWN is unknown and the node is a connUnit in the responding agent, then the value of this object must be equal to its connUnitID. WWN of the local switch.
Page 988 connUnitLinkPortNumberX 1.3.6.1.3.94.1.12.1.4 connUnitLinkPortNumberX 1.3.6.1.3.94.1.12.1.4 The port number on the unit specified by connUnitLinkNodeIdX, if known; otherwise, -1. If the value is nonnegative, then it is equal to connUnitPortPhysicalNumber. ISL- Physical port number of the E_Port. Device- Physical port # to which the device is connected. Fabric OS MIB Reference 53-1001156-01...
Page 989 connUnitLinkPortWwnX 1.3.6.1.3.94.1.12.1.5 connUnitLinkPortWwnX 1.3.6.1.3.94.1.12.1.5 The port WWN of the unit specified by connUnitLinkNodeIdX, if known; otherwise, 16 octets of binary 0. This is the WWN of the port to which the device is connected. Fabric OS MIB Reference 53-1001156-01...
Page 990 connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6 connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6 The node WWN of the unit at the other end of the link. If the node WWN is unknown and the node is a connUnit in the responding SNMP agency, then the value of this object must be equal to its connUnitID.
Page 991 connUnitLinkPortNumberY 1.3.6.1.3.94.1.12.1.7 connUnitLinkPortNumberY 1.3.6.1.3.94.1.12.1.7 The port number on the unit specified by connUnitLinkNodeIdY, if known; otherwise, -1. If the value is nonnegative then it is equal to connUnitPortPhysicalNumber. ISL- Physical port number of the remote port. Device: -1. Fabric OS MIB Reference 53-1001156-01...
Page 992 connUnitLinkPortWwnY 1.3.6.1.3.94.1.12.1.8 connUnitLinkPortWwnY 1.3.6.1.3.94.1.12.1.8 The port WWN on the unit specified by connUnitLinkNodeIdY, if known; otherwise, 16 octets of binary 0. ISL- WWN of the remote port. Device- Port name. Fabric OS MIB Reference 53-1001156-01...
Page 993 connUnitLinkAgentAddressY 1.3.6.1.3.94.1.12.1.9 connUnitLinkAgentAddressY 1.3.6.1.3.94.1.12.1.9 The address of an FCMGMT MIB agent for the node identified by connUnitLinkNodeIdY, if known; otherwise, 16 octets of binary 0. ISL- IP address (IPv4). Device- 0 (Null). Fabric OS MIB Reference 53-1001156-01...
Page 994 connUnitLinkAgentAddressTypeY 1.3.6.1.3.94.1.12.1.10 connUnitLinkAgentAddressTypeY 1.3.6.1.3.94.1.12.1.10 If connUnitLinkAgentAddressY is nonzero, it is a protocol address. ConnUnitLinkAgentAddressTypeY is the “address family number” assigned by IANA to identify the address format (for example, 1 is Ipv4, 2 is Ipv6). ISL- Type 1. Device- 0 (Null). Fabric OS MIB Reference 53-1001156-01...
Page 995 connUnitLinkAgentPortY 1.3.6.1.3.94.1.12.1.11 connUnitLinkAgentPortY 1.3.6.1.3.94.1.12.1.11 The IP port number for the agent. This is provided in case the agent is at a non-standard SNMP port. ISL- IP port. Device- 0 (Null). Fabric OS MIB Reference 53-1001156-01...
Page 996 connUnitLinkUnitTypeY 1.3.6.1.3.94.1.12.1.12 connUnitLinkUnitTypeY 1.3.6.1.3.94.1.12.1.12 Type of the FC connectivity unit, as defined in connUnitType. • ISL- Switch device. • End devices- End device types based on an FCP Inquiry. Brocade does not support Hubs. TABLE 21 connUnitLinkUnitTypeY End Devices Storage System Storage Sub-system Unknown Other...
Page 997 connUnitLinkConnIdY 1.3.6.1.3.94.1.12.1.13 connUnitLinkConnIdY 1.3.6.1.3.94.1.12.1.13 This is the Fibre Channel ID of this port. If the connectivity unit is a switch, this is expected to be a Big Endian value of 24 bits. If this is loop, then it is the AL_PA that is connected. If this is an E_port, then it contains only the domain ID.
Page 998: Statistics Group
connUnitLinkCurrIndex 1.3.6.1.3.94.1.12.1.14 connUnitLinkCurrIndex 1.3.6.1.3.94.1.12.1.14 Not supported in Fabric OS v2.6.1. The last-used link index. Statistics Group Not supported in Fabric OS v2.6.1. Port types are aggregated into a port type class, such as all the fabric port types. Each individual port has only one statistics table. For all objects in the statistics table, if the object is not supported by the conn unit, then the high order bit is set to 1, with all other bits set to 0 (for example, the last eight bytes of the returned value might be ...:80 00 00 00 00 00 00 00).
Page 999 connUnitPortStatTable 1.3.6.1.3.94.4.5 connUnitPortStatTable 1.3.6.1.3.94.4.5 A list of statistics for the fabric port types. Fabric OS MIB Reference 53-1001156-01...
Page 1000 connUnitPortStatEntry 1.3.6.1.3.94.4.5.1 connUnitPortStatEntry 1.3.6.1.3.94.4.5.1 An entry describing port statistics. Index connUnitPortStatUnitId connUnitPortStatIndex Fabric OS MIB Reference 53-1001156-01...
Page 1001 connUnitPortStatUnitId 1.3.6.1.3.94.4.5.1.1 connUnitPortStatUnitId 1.3.6.1.3.94.4.5.1.1 The connUnitId of the connectivity unit that contains this port statistics table. Fabric OS MIB Reference 53-1001156-01...

This manual is also suitable for:

Ae370a - brocade 4gb san switch 4/12 Am866a - storageworks 8/8 base san switch 8/24 8/40 8/8 8/80 ... Show all

Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

Table of Contents

Chapter 1 Understanding Brocade SNMP

Chapter 2 MIB-II (RFC1213-MIB)

Fibre-Channel-Fe-Mib (Mib-II Branch)

Chapter 3 FE MIB Objects

Chapter Entity Mib Objects

Chapter 4 Entity MIB Objects

Chapter 5 SW-MIB Objects

Chapter 6 High-Availability MIB Objects

Chapter Fibrealliance Mib Objects

Chapter 8 Fibrealliance MIB Objects

Chapter 9 FCIP MIB Objects

Chapter 10 Iscsi MIB Objects

Quick Links

Chapters

Related Manuals for Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base

Summary of Contents for Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base

This manual is also suitable for:

Table of Contents