Fw-1001; Fw-1002; Fw System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference
Brocade fabric os message reference - supporting fabric os v5.3.0 (53-1000437-01, june 2007)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Administrator's manual (452 pages)
Table of Contents
Advertisement
FW System Messages
FW-1001
Message
<timestamp>, [FW-1001], <sequence-number>,, INFO, <system-name>, <label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause
Indicates that the internal temperature of the switch has changed.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation. To prevent recurring messages, disable the changed alarm for this threshold.
If you receive a temperature-related message, check for an accompanying fan-related message
and check fan performance. If all fans are functioning normally, check the climate control in your
lab.
Severity
INFO
FW-1002
Message
<timestamp>, [FW-1002], <sequence-number>,, WARNING, <system-name>, <Label>, is
below low boundary (High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause
Indicates that the internal temperature of the switch has fallen below the low boundary.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation. Typically, low temperatures means that the fans and airflow of a switch are
functioning normally.
Verify that the location temperature is within the operational range of the switch. Refer to the
hardware reference manual for the environmental temperature range of your switch.
Severity
WARNING
Fabric OS Message Reference
53-1000437-01
Chapter
27
155
Advertisement
Table of Contents
