Fw-1275; Fw-1296; Fw-1297 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference
Brocade fabric os message reference - supporting fabric os v5.3.0 (53-1000437-01, june 2007)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Administrator's manual (452 pages)
Table of Contents
Advertisement
FW-1275
Message
<timestamp>, [FW-1275], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the number of frame types or commands that the port receives has changed from a
value outside of the acceptable range to a value within the acceptable range. The port has received
a small computer system interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP
commands in a frame.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
FW-1296
Message
<timestamp>, [FW-1296], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause
Indicates that the number of telnet violations has changed. Telnet violations indicate that a telnet
connection request has been received from an unauthorized IP address. The TELNET_POLICY
contains a list of internet protocol (IP) addresses that are authorized to establish telnet
connections to switches in the fabric.
Recommended
Run the errShow command to determine the IP address that sent the request. Responses to
Action
security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity
INFO
FW-1297
Message
<timestamp>, [FW-1297], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause
Indicates that the number of telnet violations has fallen below the low boundary. Telnet violations
indicate that a telnet connection request has been received from an unauthorized IP address. The
TELNET_POLICY contains a list of internet protocol (IP) addresses that are authorized to establish
telnet connections to switches in the fabric.
Recommended
No action is required.
Action
Severity
INFO
Fabric OS Message Reference
53-1000437-01
27
FW-1275
195
Advertisement
Table of Contents
