Fw-1304; Fw-1305; Fw-1306 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

27

FW-1304

FW-1304
Message
<timestamp>, [FW-1304], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of application programming interface (API) violations has changed. API
violations indicate that an API connection request has been received from an unauthorized IP
address. The simple network management protocol policy (SNMP_POLICY) contains a list of
internet protocol (IP) addresses that are authorized to establish API connections to switches in the
fabric.
Recommended Run the errShow command to determine the IP address that sent the request. Responses to
Action security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity INFO

FW-1305

Message
<timestamp>, [FW-1305], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of application programming interface (API) violations has fallen below
the low boundary. API violations indicate that an API connection request has been received from an
unauthorized IP address. The simple network management protocol policy (SNMP_POLICY)
contains a list of internet protocol (IP) addresses that are authorized to establish API connections
to switches in the fabric.
Recommended No action is required.
Action
Severity INFO

FW-1306

Message
<timestamp>, [FW-1306], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of application programming interface (API) violations has risen above the
high boundary. API violations indicate that an API connection request has been received from an
unauthorized IP address. The simple network management protocol policy (SNMP_POLICY)
contains a list of internet protocol (IP) addresses that are authorized to establish API connections
to switches in the fabric.
Recommended Run the errShow command to determine the IP address that sent the request. Responses to
Action security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity WARNING
198 Fabric OS Message Reference
53-1000437-01