Sec-1187; Sec-1188; Sec-1189 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

63

SEC-1187

SEC-1187
Message
<timestamp>, [SEC-1187], <sequence-number>,, INFO, <system-name>, Security
violation: Unauthorized switch
Probable Cause Indicates that a switch connection control (SCC) security violation was reported. The specified
unauthorized switch attempts to join the fabric.
Recommended Check the switch connection control policy (SCC) policy to verify the switches allowed in the fabric.
Action If the switch should be allowed in the fabric but not included in the SCC policy, add the switch to
the policy. If the switch is not allowed access to the fabric, this is a valid violation message and an
unauthorized entity is trying to access your fabric. Take appropriate action, as defined by your
enterprise security policy.
Severity INFO

SEC-1188

Message
<timestamp>, [SEC-1188], <sequence-number>,, INFO, <system-name>, Security
violation: Unauthorized device <device node name> tries to FLOGI to index/area
<port number> of switch <switch WWN>.
Probable Cause Indicates that a device connection control (DCC) security violation was reported. The specified
device attempted to login using fabric login (FLOGI) to an unauthorized port. The DCC policy
correlates specific devices to specific port locations. If the device changes connected port, the
device will not be allowed to login.
Recommended Check the DCC policy and verify that the specified device is allowed in the fabric and is included in
Action the DCC policy. If the specified device not included in the policy, add it to the policy. If the host is
not allowed access to the fabric, this is a valid violation message and an unauthorized entity is
trying to access your fabric. Take appropriate action, as defined by your enterprise security policy.
Severity INFO

SEC-1189

Message
<timestamp>, [SEC-1189], <sequence-number>,, INFO, <system-name>, Security
violation: Unauthorized host with IP address
operation.
Probable Cause Indicates that an SNMP security violation was reported. The specified unauthorized host attempted
to perform a write SNMP operation.
Recommended Check the WSNMP policy and verify which hosts are allowed access to the fabric through SNMP. If
Action the host is allowed access to the fabric but is not included in the policy, add the host to the policy.
If the host is not allowed access to the fabric, this is a valid violation message and an unauthorized
entity is trying to access your fabric. Take appropriate action, as defined by your enterprise security
policy.
Severity INFO
378
<switch WWN>
tries to join fabric.
<IP address>
tries to do SNMP write
Fabric OS Message Reference
53-1000437-01