Icpd-1001; Icpd-1002; Icpd-1003; Icpd System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

ICPD System Messages

ICPD-1001

Message
<timestamp>, [ICPD-1001], <sequence-number>,, ERROR, <system-name>, Failed to
allocate memory: (
Probable Cause Indicates that the specified function failed to allocate memory.
Recommended Check memory usage on the switch using the memShow command.
Action
Reboot or power cycle the switch.
Severity ERROR

ICPD-1002

Message
<timestamp>, [ICPD-1002], <sequence-number>,, ERROR, <system-name>, Failed to
initialize <module> rc = <error>.
Probable Cause Indicates that an initialization of a module within the ICPD failed.
Recommended Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS
Action Command Reference for more information on this command.
Severity ERROR

ICPD-1003

Message
<timestamp>, [ICPD-1003], <sequence-number>,, INFO, <system-name>, iSCSI
configuration has been committed by switch (
Probable Cause Indicates that iSCSI configuration has been committed by a remote switch in the fabric.
Recommended No action is required.
Action
Severity INFO
Fabric OS Message Reference
53-1000437-01
<function name>
).
<domain id>
).
Chapter
36
265