Sec-1158; Sec-1159; Sec-1160 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

SEC-1158

Message
<timestamp>, [SEC-1158], <sequence-number>,, INFO, <system-name>, Invalid name
<Policy or Switch name>
Probable Cause Indicates that the specified name is invalid. The name can be a policy name or a switch name.
Recommended Enter a valid name.
Action
Severity INFO

SEC-1159

Message
<timestamp>, [SEC-1159], <sequence-number>,, INFO, <system-name>, Non_Reachable
domain
Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can
only occur when the primary fabric configurations server (FCS) is distributing the security database
to the other switches in the fabric and local validation finds that there is an error in the security
database. This is a rare occurrence.
Recommended Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
Action be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity INFO

SEC-1160

Message
<timestamp>, [SEC-1160], <sequence-number>,, INFO, <system-name>, Duplicate port
<port ID> in port list (<port list>).
Probable Cause Indicates that a duplicate port member exists in the specified port list.
Recommended Verify that there is no duplicate member in the port list.
Action
Severity INFO
Fabric OS Message Reference
53-1000437-01
.
<Domain ID>
.
63
SEC-1158
371