Pdm-1004; Pdm-1005; Pdm-1006; Pdm-1007 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

51

PDM-1004

PDM-1004
Message
<timestamp>, [PDM-1004], <sequence-number>,, WARNING, <system-name>, PDM memory
shortage.
Probable Cause Indicates that the parity data manager (PDM) process ran out of memory.
Recommended Reboot or power cycle the switch.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING

PDM-1005

Message
<timestamp>, [PDM-1005], <sequence-number>,, WARNING, <system-name>, FSS register
failed.
Probable Cause Indicates that the parity data manager (PDM) failed to register with the Fabos synchronization
service (FSS).
Recommended Run the firmwareDownload command to reinstall the firmware.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING

PDM-1006

Message
<timestamp>, [PDM-1006], <sequence-number>,, WARNING, <system-name>, Too many
files in sync.conf.
Probable Cause Indicates that the configuration file sync.conf contains too many entries.
Recommended Run the firmwareDownload command to reinstall the firmware.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING

PDM-1007

Message
<timestamp>, [PDM-1007], <sequence-number>,, WARNING, <system-name>, File not
created:
Probable Cause Indicates that the parity data manager (PDM) process failed to create the specified file.
304
<file name>.
Fabric OS Message Reference
53-1000437-01