Pdm-1017; Pdm-1019; Pdm-1020; Pdm-1021 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING

PDM-1017

Message
<timestamp>, [PDM-1017], <sequence-number>, FFDC, CRITICAL, <system-name>, System
(<Error Code>): <Command>.
Probable Cause Indicates that the specified system call failed.
Recommended Run the firmwareDownload command to reinstall the firmware.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity CRITICAL

PDM-1019

Message
<timestamp>, [PDM-1019], <sequence-number>,, WARNING, <system-name>, File path or
trigger too long.
Probable Cause Indicates that one line of the pdm.conf file is too long.
Recommended Run the firmwareDownload command to reinstall the firmware.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING

PDM-1020

Message
<timestamp>, [PDM-1020], <sequence-number>,, WARNING, <system-name>, Long path
name (<Path>/<File Name>), Skip.
Probable Cause Indicates that the indicated file path name is too long. The maximum character limit is 49
characters.
Recommended Use path names not exceeding 49 characters in length for the files to be replicated.
Action
Severity WARNING

PDM-1021

Message
<timestamp>, [PDM-1021], <sequence-number>,, WARNING, <system-name>, Failed to
download area port map.
Fabric OS Message Reference
53-1000437-01
51
PDM-1017
307