Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference page 304

31
HLO-1003
The switch has received an invalid HLO because either the domain or port number in the HLO
message has an invalid value. This error can only occur when the Brocade switch is connected to a
switch from another manufacturer.
Recommended The HLO message of the remote switch must be compatible with the value specified in the FSPF
Action protocol. Refer to documentation of the other manufacturer's switch to change this value.
Severity ERROR
Severity ERROR
256 Fabric OS Message Reference
53-1000437-01