Ps-1003; Ps-1004; Ps-1005 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

55

PS-1003

PS-1003
Message
<timestamp>, [PS-1003], <sequence-number>,, WARNING, <system-name>, Failed to set
end-to-end monitoring mask on ISL ports.
Probable Cause Indicates that the restoring configuration has attempted to set the end-to-end monitoring mask on
at least one ISL port.
Recommended No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is
Action enabled. ISL monitoring can only be disabled through the Fabric Access API.
Severity WARNING

PS-1004

Message
<timestamp>, [PS-1004], <sequence-number>,, WARNING, <system-name>, Failed to add
end-to-end monitors on port
Probable Cause Indicates that the restoring configuration has attempted to add end-to-end monitors on at least
one ISL port.
Recommended No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is
Action enabled. ISL monitoring can only be disabled through the Fabric Access API.
Severity WARNING

PS-1005

Message
<timestamp>, [PS-1005], <sequence-number>,, WARNING, <system-name>, ISL monitor
on port
Probable Cause Indicates that ISL and end-to-end monitors have used up all hardware resources.
Recommended To resume counting, delete some end-to-end monitors sharing the same hardware resource pool.
Action
Severity WARNING
318
<port>
<port>
stopped counting because no hardware resources are available
which is an ISL port.
Fabric OS Message Reference
53-1000437-01