Isns-1001; Isns-1002; Isns-1003; Isns System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference
Brocade fabric os message reference - supporting fabric os v5.3.0 (53-1000437-01, june 2007)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Administrator's manual (452 pages)
Table of Contents
Advertisement
ISNS System Messages
ISNS-1001
Message
<timestamp>, [ISNS-1001], <sequence-number>,, INFO, <system-name>, Configuration
peering with external iSNS server <New config iSNS server IP address> slot/port
<New config Slot number>/ge<New config port number> (current <Current iSNS server
IP address> <Current slot number>/ge<Current port number>).
Probable Cause
Indicates that the user has issued the isnscCfg command.
Recommended
No action is required.
Action
Severity
INFO
ISNS-1002
Message
<timestamp>, [ISNS-1002], <sequence-number>,, INFO, <system-name>, Start peering
with external iSNS server <iSNS server IP address> slot/port <Slot number>/ge<Port
number>.
Probable Cause
Indicates that peering has started with the specified external internet storage name service (iSNS)
server.
Recommended
No action is required.
Action
Severity
INFO
ISNS-1003
Message
<timestamp>, [ISNS-1003], <sequence-number>,, INFO, <system-name>, Peering with
external iSNS server is disabled.
Probable Cause
Indicates that the IP address of internet storage name service (iSNS) server is set to zero, so
peering is disabled.
Recommended
If you wish to enable the iSNS server, use the isnscCfg command to show or set the server IP
Action
address; otherwise, no action is required.
Severity
INFO
Fabric OS Message Reference
53-1000437-01
Chapter
40
275
Advertisement
Table of Contents
