Fcr-1004; Fcr-1005; Fcr-1006; Fcr-1007 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

20

FCR-1004

FCR-1004
Message
<timestamp>, [FCR-1004], <sequence-number>,, INFO, <system-name>, FC router
physical devices offline at port
Probable Cause Indicates that one or more physical devices connected to the specified port have gone offline.
Recommended Verify that the device(s) were intended to be taken offline.
Action
If not, verify that the devices are functioning properly. Verify that all small form-factor pluggables
(SFPs) are seated correctly. Check for faulty cables, deteriorated SFPs, or dirty connections.
Replace the cables and SFPs if necessary.
Severity INFO

FCR-1005

Message
<timestamp>, [FCR-1005], <sequence-number>,, INFO, <system-name>, FC router LSAN
zone device removed at port
Probable Cause Indicates that a device is removed from the logical storage area network (LSAN) zone in the edge
fabric.
Recommended No action is required.
Action
Severity INFO

FCR-1006

Message
<timestamp>, [FCR-1006], <sequence-number>,, INFO, <system-name>, FC router LSAN
zone device added at port <port number>.
Probable Cause Indicates that a device is added to a logical storage area network (LSAN) zone in the edge fabric.
Recommended No action is required.
Action
Severity INFO

FCR-1007

Message
<timestamp>, [FCR-1007], <sequence-number>,, INFO, <system-name>, FC router LSAN
zone deleted at port <port number>.
Probable Cause Indicates that a logical storage area network (LSAN) zone attached to the specified port was
deleted from the edge fabric.
Recommended No action is required.
Action
118
<port number>
.
<port number>
.
Fabric OS Message Reference
53-1000437-01