Sec-1317; Sec-1318; Sec-1319; Sec-1320 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

63

SEC-1317

SEC-1317
Message
<timestamp>, [SEC-1317], <sequence-number>,, INFO, <system-name>, Inconsistent
fabric, rejecting transaction
Probable Cause Indicates that either this domain is performing an FDD merge or matched domains are not the
same as what the CM sees.
Recommended If a policy conflict exists, resolve it, then wait for the fabric to become stable. Retry the distribution.
Action
Severity INFO

SEC-1318

Message
<timestamp>, [SEC-1318], <sequence-number>,, INFO, <system-name>, Transaction
rejected due to inconsistent fabric
Probable Cause Indicates that some domains detected an inconsistent fabric.
Recommended Resolve policy conflict, if there is one, then wait for the fabric to stabilize. Retry the distribution.
Action
Severity INFO

SEC-1319

Message
<timestamp>, [SEC-1319], <sequence-number>,, INFO, <system-name>, <Event name>
updated <Datasets updated> dbs(s)
Probable Cause Indicates that the specified event has occurred.
Recommended Verify that the event was planned. If the event was planned, no action is required. If the event was
Action not planned, take appropriate action as defined by your enterprise security policy.
Severity INFO

SEC-1320

Message
<timestamp>, [SEC-1320], <sequence-number>,, WARNING, <system-name>, Non-acl
domain
Probable Cause Indicates that a domain not supporting an access control list (ACL) policy tried to join a fabric with a
strict fabric-wide policy.
Recommended No action is required. The domain is denied by disallowing all its E-ports from connecting to the
Action fabric.
Severity WARNING
390
<Domain Number>
tries to join a fabric with strict fabric wide policy
Fabric OS Message Reference
53-1000437-01